VapoLS with Prometeia compressor: the best of both worlds

Here is a mod in my Vapo LS done by Ricky

With this I can get the very good mounting system and electronics of VapoLS with the silence and effectiveness of the Prometeia..

Here is 1 photo
http://pedrorocha.planetaclix.pt/Vap...ompressor1.jpg

Besides Danfoss NL11F compressor Ricky put a new coil before the condensator...with very good results, that really exced my expectation:D

Evap Temp :
http://pedrorocha.planetaclix.pt/VapoLSPromie-62.jpg
A gain of more than -10ºC ..impressive :slobber:

No Bios :
http://pedrorocha.planetaclix.pt/Vap...mieBios-24.jpg

In Windows :
http://pedrorocha.planetaclix.pt/VapoLS-30c.jpg
A gain of more than-8ºC !!

Was calibrate with Ricky touch ..he is really perfectionist :)

Besides the cooling gains ..the compressor is almost noiseless :D
..what a diference from irritating fridge noise of the VapoLS standard compressor..

With 1.7V on the hot FX-55 013m at around 3.3, the fans at minimum speed (1200rpm) ..no noise at all ..here is the temps after one superpi 16mb ..

http://pedrorocha.planetaclix.pt/VapoLS-170v.jpg

The best of booth worlds . my 24/7 system:)

Thank you Ricky .. for another great work :toast:

very nice , love your temps ;)
It's a fusion of two great collers , vapo and prometeia...
Please show us some pics under load.

ps, your chipset isn't to hot ?

Hug'z from Portugal

wow, that thing is awesome. Was it hard for Ricky to put that Prommy compressor in the Vapo?

no, just a litle hard to get the compressor inside the vapo box, it's needed to cut a litle the box hehehe, promy compressor e a litle bigger, love this cooler :D

load -58 on lcd, with a hot fx55 @1.7v 3.xxghz, perfect

Nice work ricky!

Why are you getting lower temps than I did with DI? :( I must have used REALLY crappy springs...

Really nice 24/7 cooling idea :D

note that the -62 on evap was with an fx55 @ 1.7v idle on windows with vapo heaters on :) we get -64 with fx55 @ 1.55v idle on windows with heaters on, we didn't test with vapo not mounted on cpu and undercharged, but i think lcd @ -70 possible, lcn, not reall temps, dont know the error of lcd

props for an awesome job :)

C-BuZz

Awesome job guys!
What gas are you using?
Ricky, Pedro, you know idle temps means nothing, show us some pics at load, running prime or cpuburn.

Please check unloaded with CHY502 on evap and compare it to readings from vapo's LCD ..we will know the truth :D .

How pressures it's working loaded ?

Peter

didn't measuse hi side, we didnt test it with a real termometer becouse we didn't even get the evap out of cpu :D

nice idea let's hope asetek see this and change their compressors to nl11f

Ricky : how about low side pressure ? What gas you have used ?

What gas mixturee did you use for this and what charge?

looking good... i gota get me an LS

Nice Vapols@moded Here . :)

i ve got similar temps on my single [3/8 aspera 507&a few 410 (the new model nek2134 , that is quite alot ;)]

http://img519.imageshack.us/img519/6684/13zj.th.jpg

http://img519.imageshack.us/img519/3580/32sc.th.jpg

http://img519.imageshack.us/img519/7820/bios2au.th.jpg

Sweet mod with sweet results, lower temps and a quieter computer, who could want more?

G

Nice mod Ricky and REALLY impressive results!

Can someone tell me how big is vapochill ls case? (height, width, lenght)...

tnx

Very nice Pedro, I am getting the same mod done but it is going to be a bit different.

I am also getting the NF-7 compressor. However I am also getting a chilly1 block and his mounting system (i can also use the LS mount if I like).

Chill control will be taken out and replaced with the newest version of the G-froster which has its own windows software and all. The CC v2 isnt a very good chill control and many of them have just died. Also it is not 100% mb compatible. It did not work on my eXpert for instance and im sure there are or will be a few other mbs.

I am really glad that you posted this review, gives me insight into what i am getting. Glad that it is real quiet and the temp drop is awesome too. My temps should be the same I guess but more stable and it will be able to hold load a bit better due to the c1 block.

LittleDevil www.asetek.com and click on cpu cooling/vapochill ls something like that its all there.

Thanks :)

Where can I get that G-froster??

pm chilly or Ssilencer.