Printable View
We are wondering if this is a bad revision for the DFI NF4's. Dani had a bad experience with his R.AB0 mobo:
And I can only do 293HTT stable with my R.AB0 :( Anything higher will give me round errors on Prime.Quote:
Originally Posted by Dani
Please post your experience!
I had the AB0 revision but i didn't have to much time to play with it. Mobo died after a month without reason, while i was into the BIOS.
I got a A02 from RMA and i don't have any problems with it. Since i haven't tried his max HTT yet, at least is rock stable 320 1:1.
Where's it give you this code on the board?
You will find it writed on a white sticker in one of the slots.
Got a R.A02 here, no problems with at least 300FSB, haven't tried higher - yet! :)
Just recieved a AB0 for a friends setup. I will let yah know how it goes.
Have you tested it? :)Quote:
Originally Posted by Sloppy
sad to hear there is a bad rev :(
:(Quote:
Originally Posted by Supertim0r
Damn, you have a 0517APAW too and you're running it at 2808Mhz :upset:
What rev is your mobo?
Not yet, actually wont be till monday probally. Some parts are on back order :(
my DFI NF4 UT SLI-DR is R.AB0 but havent tried high HTT as i have FX-57 now and no need with unlocked multipliers heh
he... you can do some testings at least to help the XS members :)Quote:
Originally Posted by eva2000
R.AB0 SLI-DR with 623-3 BIOS
AMD Athlon 64 4000+ San Diego
OCZ Enhanced Latency 1GB (2 x 512MB) DDR 600 (PC 4800) Elite Platinum Edition TCCD (OCZ6001024EEPE-K)
310 MHz HTT 1:1 memtest86 stable 2.5-4-4-7 1T (with bank interleave enabled)
3 4 4 10 is not stable with interleave disabled @ 1:1
just checked...it's AB0 :stick:Quote:
Originally Posted by Daved+
Holly s*... Have you tried going for a higher HTT? That's 312, isn't it? and the R.AB0 are supposed to do 320HTT.Quote:
Originally Posted by Supertim0r
BTW, would you mind posting your settings? BIOS shots would be awesome but anything else will do just fine anyways. I want them to OC my 0517 the same way. TIA!
my bios settings are "standard" :confused:
this is stable so far @ 360fsb
I upped the vcore to be sure cpu isn't a stability factor
So, R AB0 not doing any high HTT doesn't hold ground?
I just got a bit worried as mine is R AB0 as well.
I'll report in soon as i've had the chance to mess around with it.
My new Gskill will be here today. :)
Quote:
Originally Posted by Supertim0r
Great, what is your divider -- is the RAM 1:1?
Daved+: Did you try another bios with your rev.?
Yes, could you guys please post your bios versions as well. Few days ago I received the RB.00 revision, I will test bigtoes bios since I'm limited to ~290 FSB doing 1:1 with my 2 x 512Mb GSkill PC4800LA nomatter what timings. With my previous RA.02 revision I did (see sig.) 24/7.... I'll report back to y'all
Great, a newer board!Quote:
Originally Posted by Oden
Yeah, the stock one, 510-1, 501-3, 501-1FIX, 623-1, 623-3, 704-1, 704-3, 2BT and 704-2BTA.Quote:
Originally Posted by Monge
Is there any visible difference between your old R.A02 and the new R.B00?Quote:
Originally Posted by Oden
all revisions are exactly the same so far. the rev number just refers to the bios chip it was shipped with. i found this out when i got my ultra d back from rma and it had a new rev number written in with ball point pen, so i called and asked tech support. you can also check this out at dfi street.
-edit- i just saw the above post about rev b**. this may be a newer board.
very truly yours,
politenessman
finally broke 12k
http://service.futuremark.com/compare?3dm05=1210355
100 dividerQuote:
Originally Posted by sauria
how the hell could I run my VX 1:1 with a 3000+ ;)