:toast:
Printable View
:toast:
Original description:
http://www.xtremesystems.org/forums/...1083#post81083
Fuzzy picture of chip and pins:
http://www.xtremesystems.org/forums/...1350#post81350
Pin 1 is the Fb pin and Pin 4 is ground. You can use a different ground instead of the chip ground but you need to connect one side of the resistor to pin 1.
Which side of the POT to pin 1 ? anyone ? :slobber:
Hi Jeff,Quote:
Originally posted by Jeff
Original description:
http://www.xtremesystems.org/forums/...1083#post81083
Fuzzy picture of chip and pins:
http://www.xtremesystems.org/forums/...1350#post81350
Pin 1 is the Fb pin and Pin 4 is ground. You can use a different ground instead of the chip ground but you need to connect one side of the resistor to pin 1.
I have dropped you a PM, being too ashamed to ask some very dumb questions in public :)
Regards
Andy
i need me a little help i know what to get and what pins to put the smd grabbers on put don't know what they are talking about when they say the ground. can some one please help?
I posted some explanation here
http://www.xtremesystems.org/forums/...5&pagenumber=4
I did :toast:
Variable POT 1k for spanish boy ro00lz now at 225 FSB and burning ;)
ok i have like very little experience with electronics, the mod itself looks easy but im confused as hell as to what parts i actually need.
do i use a variable resistor or a potentiometer, i thought they basically the same thing but im not really sure.
i would like to order everything i need from radio shack, so far i know i need (i think :D)
http://www.radioshack.com/product.as...5Fid=271%2D342
and some smd micrograbbers as im not keen on soldering. (a link to the grabbers i need? cant find any on radio shack)
the mod looks pretty simple but as i said im new to volt modding + electronics so im thick as **** when it comes to things like this so id rather be clear about what i need and what i need to do with it before i start melting things :)
thanks.
A variable resistor IS a potentiometer.Quote:
Originally posted by Doug
do i use a variable resistor or a potentiometer
You can probably get all the necessary items at radio shack. You can get smd grabbers at frys i guess.
ok cool, thats what i thought just i saw half the people say they used a variable resistor and half saying stuff about potentiometer and it all just kidna confused me really :pQuote:
Originally posted by impulse
A variable resistor IS a potentiometer.
You can probably get all the necessary items at radio shack. You can get smd grabbers at frys i guess.
so basically i need 2 smd grabbers,and a variable resistor,
i turn the resistor and test it with a multimeter until it gives the correct resistance....say 680 ohm then i attact one end to pin 1 and the other to pin 4 ?
Check this thread for my simple tutorial: http://www.xtremesystems.org/forums/...&threadid=8573 .