Extreme Air Cooling:Amd xp-m 2600@3107mhz

Inasmuch as in summer the temperatures are high I have put my PC in the freezer...for correctness I have beched with a ambient temperature of -6


config...

nf7-s
amd xp-m 2600
slk800+vantec tornado 92mm
ocz 520watt


Any photo...

http://www.pctuner.net/Sezione%20Har...00000969lw.jpg

http://www.pctuner.net/Sezione%20Har...00000915zu.jpg


http://www.pctuner.net/Sezione%20Har...00000987iv.jpg

In windows...
:D

http://img363.imageshack.us/img363/9299/00002109cy.jpg



Any bench...

http://img373.imageshack.us/img373/5...gine34s8le.jpg

sorry for the low bus

http://img371.imageshack.us/img371/4238/00002144kp.jpg


and...suicide score... :slobber:

http://img379.imageshack.us/img379/7569/00002113kl.jpg

And this is the validation.. :D

http://img390.imageshack.us/img390/3...107cpuz7zd.jpg
http://valid.x86-secret.com/show_oc?id=34595

WoW,

good oc cpu and the vcore, isn't that a bit to high :D

that's not real xtreem air, (xtreem air is 300mm fan)
you just putted it in a fridge.

xyus

Nice :D

How long did the air stay cold enough to bench?

Quote:

---

Originally Posted by Xyus89

WoW,

good oc cpu and the vcore, isn't that a bit to high :D

that's not real xtreem air, (xtreem air is 300mm fan)
you just putted it in a fridge.

xyus

---

do you think it is more performing an ultra fan or a fridge-pc? :)

5 minutes..

LOL

*runs off to buy a bigger freezer*

nice one dude :)

It likes a PC Icecream :]
Nice job!

Nice, score, but the voltage is insane!!!

BTW, that's chilled air, not extreme air.

http://img157.imageshack.us/img157/3...ecfm8al.th.jpg
^^Now, I run extreme air

hehe someone actualy put PC into the freezer :banana:

that's a nice clock on 1.9v. how high did you go with ordinairy aircooling ??

mine did 2.75 GHz. on 1.95v spi 1M stable, but the temps werre about 40-45 degrees, so I don't really know if the cpu of the temps are holding me back :(
I could do 2.8 suicide, but my cvf-file was corrupt and I couldn't upload it.
here's one at 2.783 GHz. :)

also my board died a few days ago, so I have to search for another board to start overclocking my mobile again :(

what bios do u use?
and what memory?
i'd like to know...

i use d27 taipan by merlin 1T and if i set the vcore to 1.85V or higher i can't use fsb's higher than 235 or so..
if vcore is 1.825 or lower, i can get 264 stable fsb...

Quote:

---

Originally Posted by Holst

Nice :D

How long did the air stay cold enough to bench?

---

exactly the same i thought :)

infos, plz =)

Quote:

---

Originally Posted by ruggero

for correctness I have beched with a ambient temperature of -6..

---

from what i see,looks like -20 at least :)

:woot:

Barton RULEZ!
I have not seen 3.1GHz with air! :slobber:

Quote:

---

Originally Posted by massman

that's a nice clock on 1.9v. how high did you go with ordinairy aircooling ??

mine did 2.75 GHz. on 1.95v spi 1M stable, but the temps werre about 40-45 degrees, so I don't really know if the cpu of the temps are holding me back :(
I could do 2.8 suicide, but my cvf-file was corrupt and I couldn't upload it.
here's one at 2.783 GHz. :)

also my board died a few days ago, so I have to search for another board to start overclocking my mobile again :(

---

My mobile on 1,925(real 1,888)is stable sp 1m@2753mhz with temps about 50°...


The bios is d26 mantarays xt...ram a-data 3200 bh-5@3,73volt :woot:

-20° is the temp more cold...

the temperature increased of 1,5 °C per minute :D :slobber:

Quote:

---

Originally Posted by MrSeanKon

Barton RULEZ!
I have not seen 3.1GHz with air! :slobber:

---

Infact this is wr air cooled :D

i couldn't go higher than 245 with d26 balck mantarays XT :(... not even in 2T..
with d27 taipan by merlin i can get 264 fsb 1T prime stable

the thing is.. that i got only 245 on 2 different boards.... which could go higher with the other bios..
how is this possible?

Quote:

---

Originally Posted by V0rt3x

i couldn't go higher than 245 with d26 balck mantarays XT :(... not even in 2T..
with d27 taipan by merlin i can get 264 fsb 1T prime stable

the thing is.. that i got only 245 on 2 different boards.... which could go higher with the other bios..
how is this possible?

---

Yes...is possible...

What PSU do you have?

Quote:

---

Originally Posted by ruggero

My mobile on 1,925(real 1,888)is stable sp 1m@2753mhz with temps about 50°...


The bios is d26 mantarays xt...ram a-data 3200 bh-5@3,73volt :woot:

-20° is the temp more cold...

the temperature increased of 1,5 °C per minute :D :slobber:

---

so you did gain a lot with overclocking subzero :D

i have a kme ph500 active PFC.
anyway, the thing is that i've reached the EXACT same fsb with the same bios...
with taipan however, i got 264 on one and 268 on the other...
why were they limited?

i must also say that i have the same psu with this bios also