What means the King of DDR600?GSkill 1GBFF 2.46V SP2004 finished

Recently, I’ve been spending time to test some AMD hi-end CPUand other motherboards.
As good luck, DFI nF4 LP released 6/23 BIOS.
Let me challenge the limitation of my FF

Looks

http://img186.echo.cx/img186/1296/001uw.jpg

Original Specification :

* Packing : 1024MB kit (2x512MB) dual channel pack
* IC Chips : Samsung TCCD
* CAS Latency : 2.5-3-3-7 (PC4400) / 2.5-4-4-8 (PC4800)
* Test Voltage : 2.85~2.95 V
* PCB : 6 layers PCB
* Speed : DDR 550 MHz (PC4400) / DDR 600 MHz (PC4800)
* Pin Count : 184-pin DDR SDRAM
* ECC : Non-ECC
* Registered/Unbuffered : Unbuffered
* Warranty : Life-time


http://img186.echo.cx/img186/204/022vj.jpg

The proverb said : There is always a great cooler behind the great OCer

Of course, windwithme also got one.

http://img186.echo.cx/img186/6417/044lk.jpg

Test Configuration
AMD Athlon64 3000+ 0517 (BIOS:6/23-1)
DFI nF4 LANParty Ultra-D
GSkill 1GBFF
SPARKLE6200
Sunnystone water-cooler
TOPOWER 520W

In BIOS, DRAM set to 2.5V, tweak the parameters to 2-2-1-2, not normal 2-2-2-3.
Direct to run SP2004 level 9.
After 53 minutes, the system is still stable.

http://img186.echo.cx/img186/5685/24660010gk.jpg

Press Stop

http://img186.echo.cx/img186/4779/24660029rk.jpg


There is a legend...
If someone can collect AMD legendary FX57 and E6 stepping 3000+.3200+.3500+.3800+, there will be some miracle...

Last week, I’ve post E6(BW) 3000+ & 3800+ simple test...
Now, lets see another E6
http://img186.echo.cx/img186/2674/036tr.jpg

Next test probably 4600+ VS FX57, or 4800+ simple test.
I will update without schedule... :p:

Only 2.5v, very cool ;)

How does performance increase/decrease when you change the parameters?

Can you test superpi, 3dmark01, sisoft, etc, etc ?

sweetness! 2.5v.... :slobber: :toast:

Only one single Prime 95 test for 53min? You didn't even allow it to pass one test. That's ridiculous.

After running 1 night

http://img186.echo.cx/img186/639/24660037ob.jpg

Press Stop

http://img186.echo.cx/img186/4282/24660044nc.jpg

what else were you running in the background? why so little test after 8 hours???

yea.. thats strange. My sp2004 and blend test is always at 100% cpu after first 2 minutes:

http://img206.echo.cx/img206/7065/sp20044gx.th.jpg

sorry
i install too much Softwares
now i update it :p:

run SP2004 level 10
http://img186.echo.cx/img186/9686/24660014ru.jpg

Let's see Spi32M at those settings :D

Peace :toast:

Don't forget to put the smartguardian :cool:

623 bios? i want one :D

wow.. crazy low voltages... those are some sweet sticks.

wow... thats an amazing CPU

Very nice indeed.

What's the highest speed your FF can do at 2.5-3-3-7?

to krampak:
i forget it again :slapass:

to RaptorRaider:
DDR600 2.5 3-3-7
my before test :p:
http://img186.echo.cx/img186/4629/27000pj.jpg

wow, very very nice at 2.5v !
that is so cool, i will get my ff soon, thanks a lot wwm, you do a great jobb :toast:

did you try more voltage to the rams ?
its 440 so im wonder above the difference at 2.8v-2.9v and even more...

Quote:

---

Originally Posted by windwithme

to krampak:
i forget it again :slapass:

to RaptorRaider:
DDR600 2.5 3-3-7
my before test :p:
http://img186.echo.cx/img186/4629/27000pj.jpg

---

Wasn't Smarguardian supposed to show 2.46v instead of 2.6v :confused: :stick:

Quote:

---

Originally Posted by MaxxxRacer

wow.. crazy low voltages... those are some sweet sticks.

---

The DFI board overvolts, so it's actually closer to 2.63vdimm.

The more important point is this pair of FF is what he pick from hundred pairs of FF
What about customer?lol
what about normal FF?
Can you guaranteed me every ff is the same can run this?
I am not jealous , I got several FF here
And stop this POS!

i had the same problem with prime and sp2004 on my 3200 winnie and g skill... it would run for hours but would hardly complete any testsmaybe one or two , were my other rig would complete lots of passes in the same amount of time

Quote:

---

Originally Posted by amrgb

Wasn't Smarguardian supposed to show 2.46v instead of 2.6v :confused: :stick:

---

my test
DDR600 2.5 4-3-7 2.46V
DDR600 2.5 3-3-7 2.6V

Got it. I thought you were adding the Smartguardian pic to your previous result.

Have you tried 2.5-4-3-7 2.46v for superpi32M stablility?

Its curious but sometimes I have settings that can run OCCT for hours but fail Superpi32M.

Quote:

---

Originally Posted by iddqd

The DFI board overvolts, so it's actually closer to 2.63vdimm.

---

Right . My board is over ~ 0.1v than setting in Bios :slapass:

Quote:

---

Originally Posted by windwithme

to RaptorRaider:
DDR600 2.5 3-3-7

---

Just like Onepagebook and formyfaith eh?
I'm surpised there are so few people with FF and that they all seem to max out exactly at DDR600.

Quote:

---

Originally Posted by Onepagebook

The more important point is this pair of FF is what he pick from hundred pairs of FF
What about customer?lol
what about normal FF?
Can you guaranteed me every ff is the same can run this?
I am not jealous , I got several FF here
And stop this POS!

---

Hundred pairs of FF? Maybe you/he can send me one? :slobber:
I'd love to test 'the King of DDR600' like windwithme calls FF but they're all sold out over here. :mad:

What do 'customer' and 'normal FF' and 'guaranteed' speed matter at XS?
For those die-hard overclockers out there, isn't XS all about picking your best pair and overclocking it to extreme situations?

Quote:

---

Originally Posted by xs64

Right . My board is over ~ 0.1v than setting in Bios :slapass:

---

Yeah, basically. Try measureing with a multimeter.