Printable View
Brought the Corsair DDR2 5400UL to some new height on the Asus P5WD2 Premium and Pentium D Smithfield
http://www.vr-zone.com.sg/Shamino/955/595.jpg
Just edged past the stilt's record by a bit...
http://www.vr-zone.com.sg/Shamino/955/record1.jpg
http://valid.x86-secret.com/records.php
With 4, 3, 3, 10.... pretty tight timings for such a speed :D
DDR2 + Smithfield, refreshing change for me!
:cool: now bench them :D
^ Eva has a point :)
LardArse, quite nice :toast:
I got some Corsair 8000 sticks on my desk in reserve, thou :D
The first pair easily hits DDR850 with 3-2-2-1 settings and 2.1 VDD ;)
Haven´t tested the second pair yet.
Insane speed LardArse.
OT: Larsk we need to do that Vmem mod sooon :D
Wow. Insane speed.:D
Can you take sandra ss screen?
Congrat!!!
Thx stilt. :)Quote:
Originally Posted by The Stilt
Sisoft buffered is screwed up though, really pathetic scores, unbuffered looks ok... this is on a 925XE partition with 955 drivers installed over so it could be this or just the Pentium D...
Heh how much Vdimm do your 5400UL sticks like?
Testing memory takes up sooo much time!
good job
let's see some bench now :)
LardArse
:confused: can you change the multiplier on model 840 Extreme edition ? where is the multi range ? x 14 - x 60 and nice memorys you have :D
There are few different chips used in Corsair 5400UL sticks.Quote:
Originally Posted by LardArse
My sample sticks use Micron BT-37E (3.7ns) chips, and they seem to take voltage up to infinite. Production versions seem to use Micron BT-3 (3ns) chips, and take less voltage to achieve same overclock. So far I have been running them at 2.9V max.
Corsair 8000UL sticks use some other chips than BT-37E or BT-3. Last three numbers in the P/N: defines which IC does the sticks use.
My 5400UL sticks had 17-5 LOT code, which means Micron D9 BT-37E.
Other 5400UL sticks had 13-1 LOT code and they used Micron D9 BT-3 IC.
what kind of bandwidth are you getting? My board doesn't do dividers very well, most of the time it run below 200 MHz which really sucks.
Speaking of which I hope you arent using the 1:2 divider :( Its semi-broken and doesnt provide actual speed.Quote:
Originally Posted by jkabaseball
mine doesn't work and some others dont either hoping a BIOS update will fix this.
shamino plz tell me what voltage you have set up?your mobo was vmodded?thx
every voltage cept vcore was maxed out.Quote:
Originally Posted by gloatlizard
vdimm awas around 2.75v, modded.
One of the advantages DDR2 had over DDR1 was the lower vDimm (1.8V vs. 2.5V). Now it seems that 3.0V may soon not be enough for DDR2.
Does this memory come with 2x1024 modules?
Good stuff, I saw your score yesterday when I submitted mine.
1:1 stuff 3-2-2
Holy shmoly FUGGER. Nice result
FUGGER, that the chip I just sent you?
FCG, yes it is. Im sure it will be benching 6.xGhz this weekend.
I can bench up to 5.3Ghz now on single stage vapo.
Lardarse, I cought you kinda. I get errors in memtest at 616Mhz. I went 5-2-2-9 but I will try 5-3-3-x
http://www.xtremesystems.org/forums/...ad.php?t=66851
FUGGER, can I pick them or WHAT??!? :D
Fugger, wow! Thats fast!
Let's see thestilt finish up his tests with the 8000UL corsair!
@ LardArse:
DDR 2 1200 or what? :D :toast:
Well.... insane speed... :eek: :banana:
mine 5400v1.2 is 29-1Quote:
Originally Posted by The Stilt
what does mean 3ns or 3.7ns ?
I looked in corsair site & didnt find it
BTW i am watching ur work here and in akiba pc site for some time .two word's for you great job thx for the mod's on ur site keep it up :clap: