[Team MXS] 9600 Series 0wned - WR in all 3DMarks

Finally got #1 in all 3DMarks at last weekend with Saphire 9600XT under cold water from waterpipes :banana:

3DM01: 20210 3D Marks http://service.futuremark.com/compare?2k1=8620818
3DM03: 5750 3D Marks http://service.futuremark.com/compare?2k3=4055310
3DM05: 2661 3D Marks http://service.futuremark.com/compare?3dm05=4055309

Got great performance increase in 3DM05 with new 5.6 driver (about +100 points), but for 3DM01 5.3 faster than 5.6. I tried DX8.1b+4.12 but got less than with DX9.0c+5.3.

Some pics:
http://img111.echo.cx/img111/1171/96...ter11vw.th.jpg http://img292.echo.cx/img292/3707/96...ter28tc.th.jpg http://img152.echo.cx/img152/4278/96...ter34rn.th.jpg

That is some seriously fast ram!
WD.

why are you running the ram at 217mhz but with insane timings, wouldnt 272 2-2-2-5 (ie using the 183 divider) give better results?

Nice.

Actually since i have 9600xt, and i have fastest under 2Ghz with it.. hmm..

Naah. :)

http://service.futuremark.com/compare?3dm05=931704

nice score but you could do better, I beat you in every test even car high on my 2.6GHz winny. You really need some tccd ram=big boost!

Cossey

Quote:

---

why are you running the ram at 217mhz but with insane timings, wouldnt 272 2-2-2-5 (ie using the 183 divider) give better results?

---

Because my BH-5 runs @ 2.8V not more than 217MHz with any timings (2.0/2.5-x-x-x). 2.8V is max vmem on not vmoded Epox 9NDA3J and I can't do vmods on not my own hardware.

Geforce4ti4200

Quote:

---

You really need some tccd ram=big boost!

---

Yes, tccd is better than bh-5 with only 2.8V and if such ram will be available for me - may be I'll test this 9600XT again.

ask someone here, im sure he will sell you 2x256mb tccd ;)

Quote:

---

Originally Posted by Geforce4ti4200

nice score but you could do better, I beat you in every test even car high on my 2.6GHz winny. You really need some tccd ram=big boost!

---

Unless you beat S_A_V in every test with a 9600 that is irrelevant.

What is this hynix ram timing thing your talking about???

Quote:

---

Originally Posted by Geforce4ti4200

nice score but you could do better, I beat you in every test even car high on my 2.6GHz winny. You really need some tccd ram=big boost!

---

Also, Geforce, why do you say this everytime someone posts a score with a different (weaker) card than a 9500np->9700 (presumably the score you keep talking about).
Well I've got news for you....I completley 'pwned' your best GF4mx score with a 6600GT. Does that mean anything?

There's a score above you in 01, but his nature is way too high :p: (bugged or cheated run probably)

http://service.futuremark.com/compare?2k1=8616261

But nice scores with only watercooling :)

Quote:

---

What is this hynix ram timing thing your talking about???

---

I just replaced default Saphire 9600XT timings to timings from HY5DU283222AF-28 memory datasheet (RFC=17, RAS=10, RCDRD=5, RCDWR=2, RP=5).
http://www.hynix.com/datasheet/pdf/dram/HY5DU283222AF(Rev.0.7).pdf
http://img141.imageshack.us/img141/8...timingsmod.gif

Nice score on a 9600xt ;)

coolio how many points did it give?

http://www.samsung.com/Products/Semi...K4D263238E.htm

those are my chips but I cant find the timings table :(

here u go

woot thanks alot! lemme give it a whirl ;)

well those are already the settings in atitool :( o well

I'm holding down second for the 9600 in 05 :woot:

If only I didn't have the 3.3 ram :stick:

Quote:

---

Originally Posted by JSU

well those are already the settings in atitool :( o well

---

try the GC-25 setting. same chip, binned higher, looser timeings, rated to 400mhz.

Finaly my 1 year old record have been beaten :toast: Congrats for that m8 :clap:

Woundering how my card have done in your rigg :D 774/451(902)

any new S_A_V? saw you have done some mods to ur system :)

Why isn't it on the ORB? And my score 200 points behind gabbax is still there? :D

This is OLD!

Well gee I lack the ability to read :(