15 usb bug)

Printable View

Show 100 post(s) from this thread on one page

06-18-2005, 07:26 AM
windwithme

DFI LANParty nF4 6/18 bios(fix 6/15 usb bug)

1.fix 6/15 usb bug
2.The 1st power on after AC OFF
ac off , not off clear cmos --> "program dram voltage based on user select value(only up to 3.2V) "--> detect dram --> testing the dram --> program the dram voltage up to the final value if you select higher than 3.2V

6/18-1

6/18-2

6/18-3

If you can not oc as high as previous build , report the detail of your situation ... this build will be the release candidate if there is not other big problem reported ...

THANKS OSKAR :)
06-18-2005, 07:41 AM
exscape

What's the USB bug?
06-18-2005, 07:44 AM
Major

Just like b4 ????

6/18-1 general purpose (most ram)

6/18-2 UTT/BH

6/18-3 TCCD

Edit: Just flashed from 510-3 to 618-3 and no issues, usb is working fine, the only thing that I noticed was that in 618 the NV Lan Mac defaults to MII in bios instead of Pin strap in previous bios revisions. this may cause your lan to not function until you change the settings in bios.
06-18-2005, 07:56 AM
highoctane

Quote:

Originally Posted by exscape

What's the USB bug?

There was/is an issue with using USB keyboard with the 615 bios.
06-18-2005, 08:04 AM
[timko]

No USB issues for me so I'll wait until Pershoot adds this to his bootable CD before trying :)

Thanks for the info WWMe :)
06-18-2005, 08:05 AM
windwithme

Quote:

Originally Posted by Major

Just like b4 ????

6/18-1 general purpose (most ram)

6/18-2 UTT/BH

6/18-3 TCCD

Edit: Just flashed from 510-3 to 618-3 and no issues, usb is working fine, the only thing that I noticed was that in 618 the NV Lan Mac defaults to MII in bios instead of Pin strap in previous bios revisions. this may cause your lan to not function until you change the settings in bios.

TCCD or UTT
I like -1

oskar tell me
-1 from 0326
-2 form 0316
-3 form 0310
not dram
06-18-2005, 08:10 AM
NiCKE^

Then it's like before, 0316 is the UTT/BH-5. Will add it to my website.
06-18-2005, 08:11 AM
TrancëJay

Quote:

Originally Posted by Major

Just like b4 ????

6/18-1 general purpose (most ram)

6/18-2 UTT/BH

6/18-3 TCCD

Edit: Just flashed from 510-3 to 618-3 and no issues, usb is working fine, the only thing that I noticed was that in 618 the NV Lan Mac defaults to MII in bios instead of Pin strap in previous bios revisions. this may cause your lan to not function until you change the settings in bios.

wanna know too...
06-18-2005, 08:16 AM
wtz54321

Quote:

Originally Posted by Major

Just like b4 ????

6/18-1 general purpose (most ram)

6/18-2 UTT/BH

6/18-3 TCCD

Edit: Just flashed from 510-3 to 618-3 and no issues, usb is working fine, the only thing that I noticed was that in 618 the NV Lan Mac defaults to MII in bios instead of Pin strap in previous bios revisions. this may cause your lan to not function until you change the settings in bios.

Try to load optimized default , what I see is the optimized default is still pin strap not MII ...

And Try to re-enter the MAC adress if you lose internet connection after you flash bios ... You may clear the MAC address and cause the internet problem ...
06-18-2005, 08:56 AM
[XC]Atomicpineapple

Just flashed to this BIOS, changed back to Pin Strap manually (whatever that means, just as long as my net works in happy!). Everything else working fine.
06-18-2005, 09:01 AM
setyotomo

any OC improvement? more stability ?
06-18-2005, 09:12 AM
smids

Yay! I hope this fixes my USB mouse, PS/2 keyboard problem. I've been on the 414's because of this problem in both the 510's and the 615's. Lets give this a good go.
06-18-2005, 09:19 AM
[XC]Atomicpineapple

Dont seem to be able to OC further, TwinMOS SP BH-5 still wont do more than DDR500 2-2-2-8 stable at 3.5 volts, and I'm not going to throw more power at it untill I'm done with uni and needing my PC for work. The multi's still have problems, 250x10 still requires more voltage than 278x9.
06-18-2005, 09:22 AM
HousERaT

any new results yet? any higher clocks or fsb with the new bios?
06-18-2005, 09:23 AM
dnottis

Quote:

Originally Posted by Atomicpineapple

The multi's still have problems, 250x10 still requires more voltage than 278x9.

Thats interesting... prime will die at 2 hours at 280 x 10 1.66v, I need like 1.69v to stabilize even then its not 100% stable - but I can run 312 x 9 1.64v and prime all night. Maybe thats just something with the chipset. I just figured it was my CPU being ghey.
06-18-2005, 09:32 AM
cpulloverclock

I flashed with my pump off :D
06-18-2005, 09:36 AM
xs64

OMFG !!! I just can boot at DF , oc will refuse booting , i flashed back 414-1 :(
06-18-2005, 09:37 AM
smids

Quote:

Originally Posted by cpulloverclock

I flashed with my pump off :D

I've done that once. After flashing, when I had reset all my figures, it gave me so many checksum errors. Wondered why, then pooed myself when I realised my pump was off. :D
06-18-2005, 09:51 AM
[XC]Atomicpineapple

Quote:

Originally Posted by dnottis

Thats interesting... prime will die at 2 hours at 280 x 10 1.66v, I need like 1.69v to stabilize even then its not 100% stable - but I can run 312 x 9 1.64v and prime all night. Maybe thats just something with the chipset. I just figured it was my CPU being ghey.

Hmmm, wonder if it is fixable in BIOS, be annoying if it isnt, oh well, could just be a few CPU's, not sure how widespread the problem is.
06-18-2005, 09:53 AM
cpulloverclock

2772 1.41v ok
wc and room temp = 31C :D
06-18-2005, 10:02 AM
IvanAndreevich

cpulloverclock
Is that better or same as before
06-18-2005, 10:06 AM
cpulloverclock

Quote:

Originally Posted by IvanAndreevich

cpulloverclock
Is that better or same as before

dunno

will know in a few hours
06-18-2005, 10:43 AM
bottone

Anyone know what mem table is in the 615 official bios?
06-18-2005, 10:44 AM
metro.cl

just bought this mobo, ill give this bios a try later
06-18-2005, 10:50 AM
//mAr

Quote:

Originally Posted by bottone

Anyone know what mem table is in the 615 official bios?

i think 310

Show 100 post(s) from this thread on one page