G.Skill F1-4800DSU2-1GBFF DDR600 @ 5-3-3-2.5 results.

Bellow are my G.Skill 1GB FF results. :)

G.Skill rocks! :D

Test Rig:
- AMD San Diego 3700+
- DFI Ultra-D with 615 BIOS
- OCZ Powerstream 520
- XP-90C + Vantec Tornado 38T 92mm

nice sticks!!! really good ones

Nice results. Now get them crunching for D2OL. BTW, is that the max, or can the go to like 320-330?? Try raising the read preamble to 6.5 and the max async latency to 9. Not much loss in sandra, and usually allows for higher overclock.

Quote:

---

Originally Posted by formyfaith

Bellow are my G.Skill 1GB FF results. :)

G.Skill rocks! :D

Test Rig:
- AMD San Diego 3700+
- DFI Ultra-D with 615 BIOS
- OCZ Powerstream 520
- XP-90C + Vantec Tornado 38T 92mm

---

nice one ! i miss some info so :
1) is that a 440 tccd ?
2) how much voltage you need to do 300mhz 2.5-3-3 ?
3) that 300mzh pass memtest and can be 24/7 clock ?


thanks :toast:

Quote:

---

Originally Posted by moddolicous

Nice results. Now get them crunching for D2OL. BTW, is that the max, or can the go to like 320-330?? Try raising the read preamble to 6.5 and the max async latency to 9. Not much loss in sandra, and usually allows for higher overclock.

---

Haven't tried yet :D
BTW I don't like loosening specific parts for ram settings, because I loose
pi value, but thanks for the advice and will try later. ;)

Quote:

---

Originally Posted by cupra

nice one ! i miss some info so :
1) is that a 440 tccd ?
2) how much voltage you need to do 300mhz 2.5-3-3 ?
3) that 300mzh pass memtest and can be 24/7 clock ?


thanks :toast:

---

1) yes 440 tccd
2) 2.9V
3) yes it passes memtest, and 24/7 is possible. :)


Bellow is a updated pi screenie with better tuning. :)

hmm tried lower vdimm? read somewhere kakarato said not to use too high on the FF..

Quote:

---

Originally Posted by babyelf

hmm tried lower vdimm? read somewhere kakarato said not to use too high on the FF..

---

This is true....your OC will start diminishing if you use that high a Vdimm. Here's my FF's @ 2.73:
http://img54.echo.cx/img54/1518/10x320spi1m3dw.jpg

Quote:

---

Originally Posted by babyelf

hmm tried lower vdimm? read somewhere kakarato said not to use too high on the FF..

---

I think it differs on what CPU you're using. :)
With an other clawhammer core CPU I can lower the vdimm to 2.8V. :D

Quote:

---

Originally Posted by s7e9h3n

This is true....your OC will start diminishing if you use that high a Vdimm. Here's my FF's @ 2.73:

---

I've been using some other TCCD rams at 2.9V for more than half a year,
and no problems yet. :)

Quote:

---

Originally Posted by formyfaith

I think it differs on what CPU you're using. :)

With a clawhammer core I can lower the vdimm to 2.8V. :D



I've been using some other TCCD rams at 2.9V for more than half a year,
and no problems yet. :)

---

Well, the info is straight from OPB, but you can do whatever you like with your memory ;)

Quote:

---

Originally Posted by s7e9h3n

Well, the info is straight from OPB, but you can do whatever you like with your memory ;)

---

:eek: Then for just in case,
Think I'll also need to find loosened specific settings with lower vdimm
since FF is indeed expensive. :D Thanks :toast:

Quote:

---

Originally Posted by s7e9h3n

This is true....your OC will start diminishing if you use that high a Vdimm.

---

Is it permanent or Temporary?

Quote:

---

Originally Posted by htkm1

Is it permanent or Temporary?

---

PERMANENT