I read all threads about Pentium M but I can't find nothing about Celeron-M
with Dothan core 1mb.Please post some results.
Thx :)
Printable View
I read all threads about Pentium M but I can't find nothing about Celeron-M
with Dothan core 1mb.Please post some results.
Thx :)
some results are int he dothan thread.
I find only one post by Macci.
The problem with the Celeron M is the FSB-limit, 165-180MHz. This is the case for all B1 revision and earlier Dothans. :fact:
It's still cheap power. ;)
Please post some Super Pi resultsQuote:
Originally Posted by Kamerat
I'm sorry, got my Pentium M 730 in the adapter well isulated. Don't wanna break the isulation to test my Celeron M 350 in Super PI. :)Quote:
Originally Posted by Backbone
http://i6.photobucket.com/albums/y24...e/CeleronM.jpg
Stock voltage and cooling. Using Celeron 350J. Still trying to find a way to get 100% overclock (2.6 G)
I also have a 350J that does the same on stock volts (in my Aopen 855GM board with a passive heatsink). Am waiting for my CT479 to arrive so I can swap it out into another board, up the volts and see what I get.Quote:
Originally Posted by lktuio
What do you think about
Celeron M 370 1.50 GHz 1 MB 400 MHz 90 nm 21 W
which is based on Sonoma core.Can that baby clock like 533 Fsb's Pentium M
Maybe. Might still have problems with FSB over 180 though. I also had that problem with a C-M,....max 173fsb.Quote:
Originally Posted by Backbone
Are you running it on ct-479?Quote:
Originally Posted by lktuio
if so, have you tried to increase voltage a bit and to boot at 200/201 fsb?
i'm thinking of getting this cpu+adapter myself, as multiplier (13x) is ideal for
air/wcooling and the price anit too high.
but i'm afraid it hits the wall at under 2.6ghz :(
plus i haven't been able to find this cpu in finland or in estonia, only J-model available is 370 :mad:
Can you adjust multipilier ?Quote:
Originally Posted by DrJay
lktuio:This Super pi result is too low.My winchester beat that at 2400 mhz
Celeron M are b1 core, so boot at fsb 200 are very hard.
And I have try EIST and CrystalCPUID to change multi but no result with a celeron 350 + p4p800e
celeron M 350J ,360J and 370 are all c0 :)Quote:
Originally Posted by yodadu92
but no speedstep, that's true..
btw, superpi is indeed low.
macci had this result:
Quote:
Originally Posted by macci
Quote:
Originally Posted by caater
Ahh that is the diferrance between 350 and 350J. Thanks
I don't mean to thread jack, but how is the Banias core in terms of performance?
apparently Dothan Celeron-M is somewhat higher performance due to a couple enhancements. It also uses less power at standard vcoreQuote:
Originally Posted by busta`
Not with EIST...Quote:
Originally Posted by Backbone
Some result with one or two tweak: 34sec at super pi 1M and 283pt for cpu mark
http://www.xtremesystems.org/forums/...id=32071&stc=1
that's very nice score for a celeron, m8 :)Quote:
Originally Posted by yodadu92
any word on cooling and any chance to boot @ 200 fsb?
wonder what 2M dothan would do at exact the same speed and mult..
anyone with a dothan, care to do a little superpi run @ 13x184 ?
I can't go highter, systeme freeze if i give him one more mhz. I will try to do pin mod and mod my vddr, but i thinks i'm hurt on fsb wall due to b1 core :(.
Have C0 cores have problem with FSB ?lktuio have it but he can't reach above 180.
C0 celerons _should_ be good.. but i haven't seen anyone around with one yet...Quote:
Originally Posted by Backbone
http://content.it4profit.com/itshop/...=asbis&LANG=bg
That is in my local shop.
But the socket is 478 wtf ? :confused: :confused: :confused:
nah, just some confusion :)Quote:
Originally Posted by Backbone
cpu has 478 pins, but socket is still 479 :)
but if you're going to use ct-479 and air/water-cooling, then only 350J is good choice.. the others just won't boot at 200fsb :(