Got 4000+ San Diego , how about Cold Bug?

hi guys, I got this 4000+ San Diego this morning.
Looks not bad at all.
After the some test results below, I try to get it under PCICE's cascade.
Too bad I can 100% confirm that San Diego still got COLD BUG
and even worse than venice does.
How, becuase it won't boot below -40 evap reading. I did observe
the temp at it get into windows, it's about -30 evap reading. Higher than that,
it just locked up and reboot itself.
Too bad, I don't have single change to try that. so I only do some serious Air cooling.[/color]

here is the -115c again...
http://www.ocxtreme.org/onepagebook/4kpsd/casn115c.jpg


Default Test:

CPU itself:

http://www.ocxtreme.org/onepagebook/4kpsd/4kpsd.jpg

** I feel Bachus is right about not to only run the pi 1m, so I run the 3d 05 instead of it.**

all the default tests:


http://www.ocxtreme.org/onepagebook/4kpsd/def3d05.jpg

http://www.ocxtreme.org/onepagebook/4kpsd/defsiscpu.jpg

http://www.ocxtreme.org/onepagebook/...efsismedia.jpg

http://www.ocxtreme.org/onepagebook/4kpsd/defsismem.jpg


some little bit OC actions:

http://www.ocxtreme.org/onepagebook/4kpsd/oc283d05.jpg

http://www.ocxtreme.org/onepagebook/...c28gsiscpu.jpg

http://www.ocxtreme.org/onepagebook/...c28gsismed.jpg

http://www.ocxtreme.org/onepagebook/...c28gsismem.jpg


I am really in bad mood now. so did not get any further, but I will get some water cooling results
to see how it goes.

:( That's a real pain. A new cascade and you can't use it. I feel sad for you.

Man OPB that sucks.

well that sucks...

This brings in some REAL dark clouds to the FX57 crowd... I may just go and buy DUMO's FX-55!!!!!!!!!!

C

OPB, I can boot at -45 evapo but I have some bugs
You have the same stepping than me :p:

2.91GHz benchable stock cooling at 1.55v :)

Quote:

---

Originally Posted by charlie

This brings in some REAL dark clouds to the FX57 crowd... I may just go and buy DUMO's FX-55!!!!!!!!!!

C

---

you right, I am like ..AMD you deserve----> :slapass:

But OPB is OPB,:D
I got Sik's fx55 here tomorrow. So I now verified that Jedi master's point about " hold your fx55" is the da0n right choice. Absolutely NO WONDER. :nono:

Cpulovecolock, yes!
it's about that.

DUMO,

YHPM !!

OPB that is sad to hear if you try with peltier and wc???? maybe you can OC higher

that sucks, AMD really needs to solve this

Quote:

---

Originally Posted by Onepagebook

you right, I am like ..AMD you deserve----> :slapass:

But OPB is OPB,:D
I got Sik's fx55 here tomorrow. So I now verified that Jedi master's point about " hold your fx55" is the da0n right choice. Absolutely NO WONDER. :nono:

Cpulovecolock, yes!
it's about that.

---

yeah, I did say that, didn't I????

:D

http://www.xtremesystems.org/forums/...ight=guys+hold

So they dont work that well on Single Phase Change then cpulloverclock.

I still have no doubt that I wouldnt have a problem with my Venice even with Dry Ice. can go all the way as PC ICE as show. Just need it in my hands :D

Quote:

---

Originally Posted by charlie

yeah, I did say that, didn't I????

:D

http://www.xtremesystems.org/forums/...ight=guys+hold

---

So it never be too late to hunt your fx55 back, but make sure don't get the new one especially after 0515. :(

Man... :( That looks to me like ~$1700 just went down the drain :(

I hope I will swallow that the day FX-57 comes out, but I think it won't be cascade benchers first choice anymore :(

I'm telling you Kevin, there must be a way to get it to work... Like with my Winnie @ -47C evap. It will NOT boot WHATSOEVER at this temperature.
I always turn on the cooler and start my system. System does not boot but I let it running, to get hot. Then I turn off the cooler and wait until temp goes -10C on evap. Then I RESET and system boots to Windows. Once I'm there, I turn on the cooler and see how temperature drops to -44C on evap and -23C on CPU. I can do whatever I want at that point.
Problem is, that in 9 out of 10 cases, when I Restart the system it will not boot up again... BUT! Sometimes it does, when just before I RESTART it, I run just some of "Memtest for Windows" or "Prime95" to get it under load. Then I quickly restart it and it boots :confused:

Try those tricks if you haven't already. Or try to boot at different multis (like me, I can boot @ x10 but not @ x9... It freezes in Windows when I do that). Also, try to boot with divider on your memory...

Whatever it takes, Kevin :)

I smell a real nice combo:
VapoChill XE and an FX57!!!!
Or one of Chilly1 or PCICE's fancy new single stager's!!

C

Ive got the same smell coming over here :D

Quote:

---

Originally Posted by bachus_anonym

Man... :( That looks to me like ~$1700 just went down the drain :(

I hope I will swallow that the day FX-57 comes out, but I think it won't be cascade benchers first choice anymore :(

I'm telling you Kevin, there must be a way to get it to work... Like with my Winnie @ -47C evap. It will NOT boot WHATSOEVER at this temperature.
I always turn on the cooler and start my system. System does not boot but I let it running, to get hot. Then I turn off the cooler and wait until temp goes -10C on evap. Then I RESET and system boots to Windows. Once I'm there, I turn on the cooler and see how temperature drops to -44C on evap and -23C on CPU. I can do whatever I want at that point.
Problem is, that in 9 out of 10 cases, when I Restart the system it will not boot up again... BUT! Sometimes it does, when just before I RESTART it, I run just some of "Memtest for Windows" or "Prime95" to get it under load. Then I quickly restart it and it boots :confused:

Try those tricks if you haven't already. Or try to boot at different multis (like me, I can boot @ x10 but not @ x9... It freezes in Windows when I do that). Also, try to boot with divider on your memory...

Whatever it takes, Kevin :)

---

Ya Good idea. BUT think about my cooling is -115c... :(

The ONLY good thing about a cold bug, is that it put's benching back into the old days when everyone had approx the same CPU power, give or take a little from CPU luck...

For 3DMark racing, it's a leveling factor! EXCEPT that now FX55 130nM/cascade will rule for a while to come!!

Quote:

---

Originally Posted by charlie

The ONLY good thing about a cold bug, is that it put's benching back into the old days when everyone had approx the same CPU power, give or take a little from CPU luck...

For 3DMark racing, it's a leveling factor! EXCEPT that now FX55 130nM/cascade will rule for a while to come!!

---

You 're right master.
And now..s7e9h3n said :"Jesus, that would be a very good reason to be pissed. I'll get on the phone with my amd guy in a sec and see what's goin on....." :D

In that thread above it says to weaken the drive strength.

did your try that opb?

Quote:

---

Originally Posted by prc8

In that thread above it says to weaken the drive strength.

did your try that opb?

---

I don't quite get it, would you please explain more? :)

OPB

weird, it's doesnt boot at -40C evapo??

set the vcore at 1.7v and after try again

Oh man that sux. Wonder if the 90nm semprons got a cold bug? Mind trying it out OPB :D

Quote:

---

Originally Posted by cpulloverclock

weird, it's doesnt boot at -40C evapo??

set the vcore at 1.7v and after try again

---

nope..tried it already.. :(

Quote:

---

Originally Posted by Onepagebook

nope..tried it already.. :(

---

at 1.4v I have -50 evapo and it boots :confused:

not normal