[ABIT] NF7-S vmod ddr+cpu need help!

Hello all!
i search a vmod for my abit nf7-s about v-ddr and v-cpu
i search in the board who has the regulator and i find this
http://djangolefous2.free.fr/nf7/hip.JPG
it's the same regulator from the kg7-kr7-kx7...
http://djangolefous2.free.fr/nf7/6520.JPG
it is the same regulator from asus A7N8X

i moded my motherboard

http://djangolefous2.free.fr/nf7/652...ed%20small.JPG
whith a pot 50k

http://djangolefous2.free.fr/nf7/hip...ed%20small.JPG
whith a pot 20k

but i have no good result
the vcore up to 0.15v after the motherboard no boot :/
and the vddr dont works
i dont know who is the problem
if you know that please help me

sorry for my bad english but i'm french
thanks for your help
:)

more pics here: http://djangolefous2.free.fr/nf7/

i upload new pics more fastest

Hmm, well, if you're saying it's not working, you should disconnect the mods, and then try booting it to see if it's fried... if it isn't, then boot it up w/o mods and get the ohmage's of the pins and post your results in here. That's what I would recommend at least--from there we (we being DDTUNG) could figure out what's going on.

The NF7 has a different controller than most Abit's, least it looks that way to me. My v1.0 board has a HIP6301VCB on it (not a HIP6301CB) , pin 7 looks "normal" at 2.484K Ohms. Pin 10 is very low, with only 25.2 Ohms of resistance.

You might try doing just the pin 7 mod to begin with, and see if you get any voltage changes.

hmm any news ? i want to vmod a nf7 soon, too :(

hello all
my motherboard is dead after a vddr mod
the vmod cpu works fine whith the help from sharpbw
but the vmod ddr it is impossible to realise this
it is the same mod to abit bd7 bd7-2 and be7 whith the winbond


regulator in the be7
http://membres.lycos.fr/djangolefous...r_location.jpg
http://membres.lycos.fr/djangolefous69/vmod-chip2.jpg


R1-pot(ohms)........bios settings.............. vmem reel
100.....................2.6V...................... ..2.86V
100.....................2.7V...................... ..2.97V
80......................2.5V...................... ..2.81V
80......................2.7V...................... ..3.04V
70......................2.5V...................... ..2.85V
70......................2.6V...................... ..2.97V
50......................2.5V...................... ..3.0V
50......................2.6V...................... ..3.12V
50......................2.7V...................... ..3.24V








but this vmod iit's very very hard

http://DJANGOLEFOUS2.FREE.FR/20.JPG

djangolefous,

The arrow above is pointing to pin12 and not 19, I just thought you should know.

OPP

Quote:

---

Originally posted by OPPAINTER
djangolefous,

The arrow above is pointing to pin12 and not 19, I just thought you should know.

OPP

---

i know:D

but my motherboard die
i ha ve a p4 now:)
3.5ghz powered :cool:

Is the cpu core mod for my KX7 the same on NF-S?
Thanks