Bench session on Dothan rig, possible WR

Hi folks :wave:

I had a very good day, benching on my self made cascade, running R404 then R290+CO2.

I played with a dothan 755, a DFI855GME-MGF full modded and 256MB of Adata BH5

I tried to reach the highest frequency on a dothan rig, and i got this :
http://www.x2.tyrou.net/WR3319.jpg

I also had a cpuZ validated screen at 3305Mhz (ID=11397)

The rig was like this :

http://www.x2.tyrou.net/rig4.jpg

What is the current WR on a dothan ? Am I far from it ?

Tomorrow, I'll do some benchies, superpi first :D

If you want, I can show way more pics :d

I know one thing i don't want anymorwe pics :stick:

got any benchies?

I'll mass resize/upload/link my pics :D

Tomorrow, superpi, I hope I can get 17*188, with BH5 at 282Mhz 2.2.2.5, it would be very cool :D

Here's some pics :

My bench rig :

http://www.x2.tyrou.net/rig3.jpg

http://www.x2.tyrou.net/rig4.jpg

http://www.x2.tyrou.net/rig5.jpg

http://www.x2.tyrou.net/rig6.jpg


I put an IHS from a celeron 1.7 on my core, I already broke a dothan core a couiple of months ago, I don't want the story to repeat :D

http://www.x2.tyrou.net/dothan_ihs.jpg


The ice going trough my insluation, and freezing my mobo :

http://www.x2.tyrou.net/mobo_ice1.jpg

http://www.x2.tyrou.net/mobo_ice2.jpg

And some other screens :

http://www.x2.tyrou.net/dothan3312.jpg

http://www.x2.tyrou.net/fsb201_4.jpg

That's all I have interesting, but if you want to see a detail, feel free to ask, I can take more pics :)

20s is possible at 3.3G with a P4C800-E dx

at 2577MHz (257.7*10) it gives 26.75s!!!!!!!!!

I have to find a CT479, breaking the 20s would be wonderful

Woahhhhh......nice pics =)...good luck!!!!!

Benches :slobber:

nice! the ihs is a good idea! :toast:

post a cpu-z link please, cant find your verification, and yeah, its hard to find the max oc for a dothan, we need to improve the vr-zone oc database to show different cores.... :D

benchs please that shoul bring lots of wr.

at 2.5ghz are like a fx-55 in super pi

Your setup looks good bro, suprised I haven't heard of you before! :)
I can't wait to see the benchies...

Quote:

---

Originally Posted by saaya

nice! the ihs is a good idea! :toast:

post a cpu-z link please, cant find your verification, and yeah, its hard to find the max oc for a dothan, we need to improve the vr-zone oc database to show different cores.... :D

---

http://valid.x86-secret.com/show_oc.php?id=11397

Really nice OC!

I see a very good superpi if you can match the mem.

http://www.xtremesystems.org/forums/...id=28532&stc=1

Quote:

---

Originally Posted by bh2k

I see a very good superpi if you can match the mem.

http://www.xtremesystems.org/forums/...id=28532&stc=1

---

sorry to ask in here i got mi notebook today it has a dothan 1.8ghz i was wondering if there is a way to oc it in windows the chipset is i855pm rev a3

i searched in clockgens web page an there isnt one that i can use :(

I have some BH5 to bench, and I could also have some VX :)

Regarding the max screen, i have a validation at 3305, a screenshot at 3312, and this pic at 3319, so I don't think someone can suspect me to cheat :D

I'm here for quite a long time, but I was busy builind my cascade, so I didn't have time to make good benches, but time has changed :D

ure losing a lot of heat through that thin and crappy insualtion. you could drop thast evap temps by a few degrees if u had no ice getting out

I insulated before my max screen, that crappy insulation has been replaced, but i don't have good pics of it :D

ah good then :D

dude thats sweet, love the clamps :D

I still have to insulate the end of my suction hose, there's some condensation one the armaflex (1/2" thick), I ran out of larger hose, so there's only one layer of foam on this tube :( On the first half of the hose, I have one inch of armaflex, I hope that's enough :)

This afternoon, I'll make new pics and benches, I hope SuperPi will run fine :D

go get the wr man!!!!

I hope 3319 is the current WR, i haven't seen something higher :D

Quote:

---

Originally Posted by Tyrou

I hope 3319 is the current WR, i haven't seen something higher :D

---

Bench please! :D

tomorrow, I won't be able to run any benchie today, I just found a leak :(

t's located on my second stage, on the copper tube which links the compressor's suction to the accumulator, a brazed joint has broken, and it leaks a lot, I lost almost all the gas during the night :(

But it will be fixed tonight, and tomorrow, the cascade will be back up to bench :D

Great job!
You beat me by 1Mhz! :D
There's still a higher Jap LN2 record though... can't remember the link