Printable View
hello
I am French and I speak very badly english it but I espere that you will include/understand me
I would like sent a tension of 3.3 volts for my GDR (twinmos). I board a p4p800 dlx (2003)
I know that it y' has 1 soldering wire, but which and or? diagram?
thank you for your assistance
I board dejas makes on this p4p800 a vmod (50k/lm358) but the tension goes down from 3.18v has 3.05 volts in load.
t is for that that I want tested a 3.3v. my food is a tower antec 1080
There is a Vdimm mod for the p4p800 here . You might also need to raise your 3.3v line if you want to run 3.3v or more through your RAM.
not persivore I board dejas does that. it is not what I want
how to obtain from the 3.3 v by welding a wire? thank you
The problem is probably your PSU's 3.3v line. You usually need your 3.3v line to be 0.2v above your Vdimm
Sorry, I didn't see your edit. You should be able to adapt this for your board (connecting pin 7 of the Dimm slot to the 3.3v line).
is it the same thing for the p4p800 dlx.. ?Quote:
Originally Posted by persivore
I want 3.3vio=vdimm
It should be the same. You might have to adjust the mod for the different board layout tho.
I don't understand
what shall I keep exactly? here ?
what link shall I keep simply to have ? vio = vdimm
http://www.xtremesystems.org/forums/...5&pagenumber=1
Is there simply this wire to connect ?
http://www.uploadyourimages.com/view...1849fl0000.jpg
The wire in your second picture should be the only one you need to connect. The others are just to help make the mod more stable.
thank you very much. I
I go tested
many probléme with the English language
nb: it is certainly necessary dismounted all the motherboard...? to do that
very well, some image of my work thank you of your assistance
http://www.uploadyourimages.com/view...9192fl0000.jpg
http://www.uploadyourimages.com/view...6011fl0001.jpg
http://www.uploadyourimages.com/view...4586fl0002.jpg
Good job, bro! :toast:
from the french....... thank you ,Malves
I made another vmod
material
http://www.uploadyourimages.com/view...7180fl0002.jpg
before downloading with memtest
http://www.uploadyourimages.com/view...1800fl0001.jpg
detect the compensator link
http://www.uploadyourimages.com/view...0578fl0003.jpg
cut the link
http://www.uploadyourimages.com/view...7318fl0004.jpg
welded la resistance
http://www.uploadyourimages.com/view...0682fl0005.jpg
welded le potentiometre a la resistance
http://www.uploadyourimages.com/view...5914fl0006.jpg
the other link of the potentiometre a la masse (whatever black link)
http://www.uploadyourimages.com/view...9094fl0007.jpg
ending
http://www.uploadyourimages.com/view...9743fl0010.jpg
result
http://www.uploadyourimages.com/view...7039fl0009.jpg
aida32
http://www.uploadyourimages.com/view...tat_aida32.jpg
Will I reach the P4P800 motherboard limits?
Because when I reach fsb=250MHZ, it doesn’t start.
http://www.uploadyourimages.com/view...1704fl0000.jpg
http://www.uploadyourimages.com/view...4340fl0001.jpg
http://www.uploadyourimages.com/view...9054fl0002.jpg
Are the Vmods fpr p4p800 E and p4p800 the same? i need some for ct479 :D