Centon PC3200LL - TCCD504 & BP808 - Test

Printable View

Show 100 post(s) from this thread on one page

03-12-2005, 09:53 AM
computersmsa

Centon PC3200LL - TCCD504 & BP808 - Test

Hello all,

I have organised a bulk order of Centon PC3200LL (150 Kits (60+90)).
We have receive them few days ago.
Chip : TCCD504
PCB : BP808
This is 2*512Mb Kit

Look the picture and my result :

http://home.scarlet.be/~pascpiet/DV/...IMG_0001_s.jpg

http://home.scarlet.be/~pascpiet/DV/...IMG_0002_s.jpg

http://home.scarlet.be/~pascpiet/DV/...IMG_0003_s.jpg

http://home.scarlet.be/~pascpiet/DV/...IMG_0004_s.jpg

http://home.scarlet.be/~pascpiet/DV/...IMG_0005_s.jpg

http://home.scarlet.be/~pascpiet/DV/...IMG_0006_s.jpg

http://home.scarlet.be/~pascpiet/DV/...IMG_0007_s.jpg

http://home.scarlet.be/~pascpiet/DV/...IMG_0008_s.jpg

http://home.scarlet.be/~pascpiet/DV/8119mbps.png
http://home.scarlet.be/~pascpiet/DV/...-4-3-5_320.PNG
http://home.scarlet.be/~pascpiet/DV/SPI1M_29s_2834.PNG

All with 2.8V and :

Quote:

tRC = 7 | tRFC = 14 | tRRD = 2 | tWR = 2 | tWTR = 2 | tRTW = 2 | tREF = 4708 | tWCL = 1 | DRAM Bank Interleave = Disable | DQS skew Control = Increase Skew | DQS Skew Value = 255 | DRAM Drive Strength = Auto | DRAM Data Drive Strenght = Level 2 | Max Asynce lantency = Auto | Read Preamble time =Auto | Idle Cycle Limit = 16 | Dynamic Counter = Enable | R/W Queue Bypass = 16x | Auto Bypass Max = 7x | 32 byte Granulation = Enable(4burst)

And DFI nF4 + Winnie 3000+ CBBHD 0450 WPBW.

I think that is good ... I'm happy :)
:toast:
03-12-2005, 10:01 AM
pancake

i take it your selling some? what kind of price?
03-12-2005, 10:39 AM
sinsinking

wow.. so many
i think these TCCD aren't pretested..
03-12-2005, 10:56 AM
HKPolice

Quote:

Originally Posted by pancake

i take it your selling some? what kind of price?

Ditto.
03-12-2005, 11:26 AM
computersmsa

Quote:

Originally Posted by pancake

i take it your selling some? what kind of price?

Non :)

sinsinking -> Tested @ 200 MHz 2-2-2-5 before seilling by Centon.
µnrealneo² -> Yes ... :( I lose 20 MHz with Enable :(
03-12-2005, 11:48 AM
TEDY

what is the price ?
03-12-2005, 11:51 AM
computersmsa

I just see that the normal price now for one stick is 185$ ... is to mush :rolleyes:
I will ask Centon for this strange price :confused:
http://shop.centon.com/memory_upgrades/advanced/?adv=1
03-12-2005, 11:59 AM
TEDY

185$ for 512 ??? Are they nuts ?

Muste be AUS $ :confused:
03-12-2005, 12:14 PM
computersmsa

Centon = USA ;)
US $
03-12-2005, 12:21 PM
iddqd

:eek: I paid way less for my BH-5..
03-12-2005, 12:25 PM
computersmsa

One mouth ago, the normal price on website was 265$ for 1Gb ... I don't understand :(
03-12-2005, 12:46 PM
pancake

lol what ya gonna do with 150 pairs!!!
03-12-2005, 12:49 PM
iddqd

He's going to bea the WR for the most TCCD ever in one box.
03-12-2005, 12:49 PM
computersmsa

It's groupped order on forums, all kits was pay before order :)
03-12-2005, 12:54 PM
pancake

lol.. well if ya have any left over ill take em off you hands
03-12-2005, 01:00 PM
computersmsa

I haven't understand :(
03-12-2005, 01:02 PM
pancake

sure do
03-16-2005, 03:27 PM
computersmsa

Up :)
03-16-2005, 03:46 PM
J-Mag

Quote:

Originally Posted by computersmsa

Centon = USA ;)
US $

And what is wierd is the dollar's value is jacked right now, just image how much they would cost if we had a strong US dollar.
03-16-2005, 06:28 PM
meateater

computermsa, are you planning on selling those?
I really want to get a pair.
Can you give me a private message on how I can get those memory from you if ever?

OT:
I just bought geil ultra x memory that wont even boot beyond 230 fsb 2.5-3-3-7 @ 2.85 volts on my msi k8n neo 2 platinum.

Its really sad... :confused:
03-17-2005, 06:06 AM
Jesse71

Hey Computermsa belgium ! The best DDR are Gskill or OCZ or Twinmos UTT not Centon :ROTF:

And where is the name "Centon" on your screens, it may be another one, no ? :p:

With my Gskill GBLA I have exactly the same timings :cool:
03-18-2005, 10:52 AM
varzmaster

Quote:

Originally Posted by Jesse71

Hey Computermsa belgium ! The best DDR are Gskill or OCZ or Twinmos UTT not Centon :ROTF:

And where is the name "Centon" on your screens, it may be another one, no ? :p:

With my Gskill GBLA I have exactly the same timings :cool:

LOL... that's not true! Centon are very high quality memory manufacturers... only they are not into this overclocking frenzy that has gotten to a rather small group of users. But that doesn't mean their memory doesn't overclock well. Computersmsa's results are not that impressive because of his rather "unfortunate" setup... I don't see a vapo-cooled FX55, like the ones used by most to achieve the best result with GSkill, OCZ and Twinmos. ;)

This is very high quality RAM (Samsung TCCD and the 808 BP PCB should be a gurantee for that) although it's a bit pricey. It remains to be seen weather the IC's are well speed binned... but that means more users should try these modules, with different, more than average-overclockable rigs.
03-18-2005, 12:44 PM
quicksilverXP

Yup... I test memory for Centon, and they sell very high quality memory mainly to OEM industries that NEED fail-free memory because it is critical towards their workplace (such as to hospital equipment and servers). Their overclocking memory market is small, but then again... so is the overclocking community in comparison to the larger OEM market for multiple industries that need memory, a similar concept with ATI and their preference towards OEM over the overclocking consumer. However, Centon is making strides towards becoming part of the enthusiast community... so expect some future products from them. I have a pair of TCCD from Centon, and there's have beat any of the other TCCD based memory that I've had in the past, and for those of you who know me, I have had MANY memory modules. Still, that doesn't correlate towards being the best brand for TCCD, since TCCD is so random (I've had G.SKill that couldn't run they're rated speeds... and PQI's that overclocked much better)... so TCCD is still hard to duplicate in terms of sheer overclocking power... it's all luck of the draw.
03-18-2005, 12:49 PM
TEDY

Quote:

Originally Posted by meateater

computermsa, are you planning on selling those?
I really want to get a pair.
Can you give me a private message on how I can get those memory from you if ever?

OT:
I just bought geil ultra x memory that wont even boot beyond 230 fsb 2.5-3-3-7 @ 2.85 volts on my msi k8n neo 2 platinum.

Its really sad... :confused:

you might have got UTT not TCCD.
03-18-2005, 01:30 PM
computersmsa

Quote:

Originally Posted by meateater

computermsa, are you planning on selling those?
I really want to get a pair.
Can you give me a private message on how I can get those memory from you if ever?

OT:
I just bought geil ultra x memory that wont even boot beyond 230 fsb 2.5-3-3-7 @ 2.85 volts on my msi k8n neo 2 platinum.

Its really sad... :confused:

I will sell about 40 kits on ebay in near time (I will take in the USA 90 kits in few day, other 50 kits is for finnish groupped order, not for sell).

I can't sell on this forum, If you want a price before eBay ... send me an PM with your email :)

Show 100 post(s) from this thread on one page