Chaintech VNF4 Ultra @ 375 mhz FSB Stable!

Yes people 375 fsb not from clockgen but from bios direct! Iam using 2005/02/03 bios,3xHT,default vchipset and I have done the vdimm mod .
Here some shots :toast: :
cpuz
http://img106.exs.cx/img106/1522/cpuz2tk.png
pi
http://img106.exs.cx/img106/7745/pi0kq.png
sandra
http://img106.exs.cx/img106/3949/sandra21gv.png

3DMarks, Iam using an asus extreme n6200ge @ (4@8pipelines)6600gt @ 515/615 mhz.

3DMark2005 = 3090
3DMark2003 = 7209
3DMark2001 = 19035
Aquamark = 51308

I think this mobo really rulez and its rock stable! :)

Awesome results! How did you get your 6200 to detect as a 6600GT??? Thanks! Please PM me as I am very curious about your setup (I have nearly an identical system)

Quote:

---

Originally Posted by Ackbar

Awesome results! How did you get your 6200 to detect as a 6600GT??? Thanks! Please PM me as I am very curious about your setup (I have nearly an identical system)

---

Thanx Ackbar Iam using rivatuner 15.4 for unlocking the 4 pipelines and change the id to 6600gt :)

http://img106.exs.cx/img106/6963/riva7zj.jpg

Quote:

---

Originally Posted by soki

Thanx Ackbar Iam using rivatuner 15.4 for unlocking the 4 pipelines and change the id to 6600gt :)

---

Good idea! Did you notice any performance improvements from just changing the ID by itself?

Update: Yes a little! :cool: :toast: :banana: :banana4: ;)

Cantu clock the clock a bit higher like 550-600Mhz I am gonna have the card this week & WC next week.

Anyone can do this really, it's only sync over 300MHz FSB that this board doesn't like.

Quote:

---

Originally Posted by TekXoID

Anyone can do this really, it's only sync over 300MHz FSB that this board doesn't like.

---

I tested it with gskill ddr600 and ιt can do sync over 300 mhz HTT/FSB. :cool:
http://img106.exs.cx/img106/8241/3367yh.th.jpg

Pretty nice numbers there soki :)

Thanx hjorth. :)

Bah. Not only anybody could do that, but it's useless to boot - no performance gains. :yawn:

amazing results :slobber:
which bios are you using? i'm using the latest bios from chaintechs site and it reads temperature erroneous and is a lazy overclocker :(

The bandwidth in memtest86 isn't too impressive and neither is 238mhz 2225.

With a good nf4 you can hit 400mhz HTT easy. You would get better performance out of a lower fsb with a higher muli as well with 1:1.

the DFI nf4 boards do 450+ stable, and 500+ suicide

Quote:

---

Originally Posted by blinky

the DFI nf4 boards do 450+ stable, and 500+ suicide

---

yes mate but for 2x price

good to know that this mobo ocs nice.

we still need 1:1 action at higher fsb to see when it maxes out

Nice overclock. It would be nice to see the ram 1:1.
Thanks

Sandra CPU scores seem low, my 3200 beats that @2.45

i personally dont see the point, hes not getting any gains and he has a :banana::banana::banana::banana:e overall Mhz

not very xtreme i know, but its a 1/1 fsb shot.

its really as far as i am going to take it till i get better than the stock cooler, the vnf4 has a "dead spot" in the cpu voltage..pretty much 1.44-1.58ish isnt there. so its 1.44 or 1.58-1.7. this is basically as far as i could get with the shown voltage.
http://img26.echo.cx/my.php?image=cpuz12qd.png
http://img26.echo.cx/my.php?image=cpuz22gb.png

RAM running at 375? Lies. It's 283.

Yeah, pretty much any NF4 board can get 400+ HTT quite easily. I can even do stupid stuff like that on my NF3 board. I can have it do 350x7 instead of 250x10, it doesnt really make a performance difference. It just looks cool, especially to unsuspecting n00bs. :D

No offense intended in this post.