DFI NF4 / BH5 @fsb 500 !!!! WR ?

:banana:

CPU-Z 1.27 validation -> ID : 3304

http://www.membres.lycos.fr/boblemag...nf4/fsb490.png

What it is me or nobody had to pass Superpi 1mo with Fsb of 500 :??: :D :D :D :D (Not optimised)

http://www.membres.lycos.fr/boblemag...nf4/fsb500.PNG

Sick results, this 2/1 divider really pushes these boards.

WOAH nice me gonna try that too :)

Great job, mine locks up over 450Mhz (R.A02 Taiwan), i'm guessing the CPU can't take it.

http://crazypc.ro/forum/index.php?ac...e=post&id=1276

:toast: :toast: :toast:

:toast: Nice work. That's the highest HTT speed I've ever seen. :)

héhé , congratz bobby :D

wow, nice! :toast:

Another French WR :toast:

nice job bob :D

Thank All !!!

Good this bios 2/18 walk really, I will try to test this day to outside see what that gives, I think of making a max screen has 505/510 without too much Problem, I do not imagine with the chipset cool with a dod and vmodée, that could go up very very high!!!!

If not my HTT is has 2 or 2.5, that doesn't change large thing has 500, I arrive has to hold a few minutes without freeze

hmmm interesting, on my dfi nf3 board the highest fsb i could get was with htt 3x... but that board is fcked up anyways :D

but maybe try 3x htt? i heard the nf4 boards can go much higher on htt speed than nf3, some via k8t800pro boards hit 1500mhz htt, whats the max speeds nf4 chipsets can do so far? i heard they go much higher than nf3 chipsets but dont know how high...

see how that board likes 3x500 :cord: :D

sorry bob :D :

http://valid.x86-secret.com/show_oc?id=3345

http://membres.lycos.fr/overcrash/30...939/FSB505.JPG
http://membres.lycos.fr/overcrash/30.../spiFSB501.jpg

i can screen at 508 i think :banana4: fut that freez,i'll retry :D

it freez at 508 ,but i've take an screen at 507 :banana: :

http://valid.x86-secret.com/show_oc?id=3349

http://membres.lycos.fr/overcrash/30...939/FSB507.jpg

i'll try an SuperPI at 505 but it freez in saving :(

Outrageous!

:slobber: :slobber: :slobber: :slobber: :slobber: :slobber:

508 without CPU-Z validation beacause freez :mad: ,but superPI at 505 :D :

http://membres.lycos.fr/overcrash/30...939/FSB508.jpg
http://membres.lycos.fr/overcrash/30.../fsb505spi.JPG

Very Good Overcrash :toast: :toast:

DFI roxxxx :banana:

Quote:

---

Originally Posted by boblemagnifique

Very Good Overcrash :toast: :toast:

DFI roxxxx :banana:

---

Tanks :D

+1 DFI POOOWWWAAAA :banana4:

looooool :D
what the hell on this is great? thats crap! big htt is nothing without big memory clock!

Quote:

---

Originally Posted by Rondrian

looooool :D
what the hell on this is great? thats crap! big htt is nothing without big memory clock!

---

my BH5 is at 250 it's not bad i think ,i'll try to set a better mem timing at 500HTT/250RAM clock ,to have good SuperPI score :D

that'S not necessary as long as you don't have higher ram clocks.... only high htt won't give more performance....

Quote:

---

Originally Posted by Rondrian

that'S not necessary as long as you don't have higher ram clocks.... only high htt won't give more performance....

---

i know ,but it's for fun :D

Quote:

---

Originally Posted by Rondrian

that'S not necessary as long as you don't have higher ram clocks.... only high htt won't give more performance....

---

But its fun to push it to the limits of the boards anyway dont you think?

Try superpi run at 1:1 250fsb and then try 2:1 with htt at 500, see how much difference..

overcrash86 ,congratz!!! :toast: :banana: :toast:
I think it's good to know how much HTT does the Board, isn't it???:D