All DFI NF4 users, please come in if you still have problem with 2.17 bios

As this effort is belong to OSkar,
I just have this beta bios couple minutes ago. It's regarding some XS friends PM me about they still got some issues on the 2.17.
As I mentioned yesterday, it could be different NVMM version package. So , here you go, this 2.18 beta bios is the old nvmm
please understand that, I can not talk about the NVMM. ;)

If you get the bios, please DO compare and confirm the results in this thread, don't just take it for granted and nothing back. PLEASE. :D

Here you go for DFI NF4 2.18 Beta bios.

what's NVMM ? i'm used 209 and 217 bios with no probs :)

Quote:

---

Originally Posted by eva2000

what's NVMM ? i'm used 209 and 217 bios with no probs :)

---

can't talk about that.. :D
Glad to hear you don't have prob. :)

Which of the bios' is the best/most optimal for TCCD? GSkill to be exact?. :shrug:

2/09, 2/17, 2/18? :confused:

Haven't got any problems with the 17/02 bios, but i will try this one out also, i want 10x270 :)

Result with the 17/02 bios see attachment. Was better than the 09/02 bios, timings are tighter on this one.

edit: uploaded wrong image lol, was from my previous mb.

has this sorted the issue with BP815 based memory?

SONOFA!!!......I haven't had any problems with 10x or 11x 270, but....


...well, problem solved with 2/18. Need to do some longer term testing but this seems to have helped me out enormously with the problem I did have. :D :toast: Since board #1 died on me, board #2 was not making me a fan of these boards. Pass my thanks on to Oskar. :)

edit to add: little more testing and there is no doubt this helped me out.

Quote:

---

Originally Posted by Lidocaine

Which of the bios' is the best/most optimal for TCCD? GSkill to be exact?. :shrug:

2/09, 2/17, 2/18? :confused:

---

Yes I'd like to know that too :confused:

I've had a terrible experience with 217, after restart I couldn't load windows anymore with my SATA Raptor 74GB drive, said ntfs.sys had an error and I got the dreaded BSOD!!! Had to LLF the drive and then reinstall everything... Lost all my data on the disk. I also reverted to my old BIOS but to no avail, the harm was already done. Now, I don't think I'm in the mood to try 218...

Just my :2cents:

Quote:

---

Originally Posted by mikead_99

SONOFA!!!...... I haven't had any problems with 10x or 11x 270, but....


...well, problem solved with 2/18. Need to do some longer term testing but this seems to have helped me out enormously with the problem I did have. :D :toast: Since board #1 died on me, board #2 was not making me a fan of these boards. Pass my thanks on to Oskar. :)

edit to add: little more testing and there is no doubt this helped me out.

---

:confused: What? 2/18 solved the problem You never had ???

This is a bit too high for me........... :toast:

Quote:

---

Originally Posted by Onepagebook

As this effort is belong to OSkar,
I just have this beta bios couple minutes ago. It's regarding some XS friends PM me about they still got some issues on the 2.17.
As I mentioned yesterday, it could be different NVMM version package. So , here you go, this 2.18 beta bios is the old nvmm
please understand that, I can not talk about the NVMM. ;)

If you get the bios, please DO compare and confirm the results in this thread, don't just take it for granted and nothing back. PLEASE. :D

Here you go for DFI NF4 2.18 Beta bios.

---

:D O.K. - first thanks for the work, but this is the 4th BIOS since beginning of February and makes me wonder which one to use?
So if You cannot talk about NVMM please give us an information when it is better to use 2/18 with the old NVMM or the 2/17 with the new one.

I mean You don't have to post secrets here but try to explain it in Your own words so that You don't get a problem with somebody.......... :toast:

i cant get over 210 with out memtest or prime95 crashing the computer. ive tried everything, except moving the jumper to the 5v rail.

3000winnie
ocz 3200 plat rev2
promie

i have to pump 3.0v into the memory just to boot or else i get beeps and a flashing power light. and what makes it bad i was able to get 240hht on a8n-sli prime and 3d stable with just 2.9v. can someone let me into the big secret here. well off the flash the bios again. wish me luck

my system work hest great with the 217 bios, to be honest its work fine wite the official bios
and all of the beta bios, but i will try the 218 anyway

thanks opb :toast:

the official 125 bios was horrible for me, wouldn't allow me to change vdimm. 209 was good, and 217 was better, so if this one uses old nvmm, i don't think i'll switch, becuase 217 has been working better than 209.

Quote:

---

Originally Posted by HARDCORECLOCKER

:confused: What? 2/18 solved the problem You never had ???

This is a bit too high for me........... :toast:

---

I guess I can be a little more clear. My 12x multi was utter crap, 13x not so good either. Much better now with the old nvmm. I'm guessing other peeps with multi issues should get some help out of this release. Doesn't seem like everyone has the multi issue either, and some that do have issues with other multi's. I honestly thought until today that my board was crap.

NVMM=NV memory management or what? :rolleyes:
I have to compare the bins one of this days :P
I like the often BIOS updates, good work, but I can't test it yet :(

ok, using the beta bios on dfi's site for now, only got board installed today but had it for a week now. its an a01 i think, had the 1/25 bios on it. so far on both the bios's i literally can't overclock at all, even slightly, will bsod in windows. 600W ocz psu, 2x 6800gt's, turned off the nx bit protection which seemed to stop bluescreening at stock which was infrequent, but overclocking it didn't help. 3500+ winchester, 2x200gb dm10+'s in raid on the nvidia controller with 2 more maxtor drives on the nvidia controller not in raid.

this same setup(diff psu though, 520W ocz) would run 2.6Ghz stable at 245ish Mhz 1:1 so i assume the memory(couldn't test anyhigher fsb) gskill LA kit is fine for at least that, and cpu can clearly do 2.6Ghz, was fully 100% stable and would do much more not stable on 1.5v.

am i missing some major setting on this dfi board, i normally laugh at people with threads with really obvious stuff but, pci-e is locked, on both other nf4 boards 101Mhz didn't auto lock it or anything so kinda assuming we don't need it here either.

also where can i get teh 2/09 2/17 bios's if they aren't on dfi site?

also i think i used raid drivers i got with the asus sli board as my dfi floppy just didn't see any drivers on it while installing windows, assume they are the same though, and using 6.39 nforce drivers, 71.81's for gfx, any known issues with any of that lot?

Quote:

---

Originally Posted by drunkenmaster

am i missing some major setting on this dfi board, i normally laugh at people with threads with really obvious stuff but, pci-e is locked, on both other nf4 boards 101Mhz didn't auto lock it or anything so kinda assuming we don't need it here either.

also where can i get teh 2/09 2/17 bios's if they aren't on dfi site?

---

You've got mail (bioses). :toast:
edit: no you don't. the email in your sig bounced.

re: the tccd...have you used 3.0V+ on them yet? I haven't tried my tccd out on this board, but that seems to be the deal with them.

No problem for 217. Will try 218. Here is the result using BIOS 217



PS: All stock air cooling.

mikead_99 , cheers for trying, haven't updated sig in a good year, or two probably :p changed it , got hte 2/09 and 2/18 now, too tired to look for the 2/17 right now.

just very weird, normally i can always max out my stuff, never ever not been able to overclock and this literally won't go 5Mhz fsb faster when i know all this stuff did 245Mhz minimum fine before. who knows :(

218 contains old nvmm and nv raid rom
for me 218 is a bit better than 217.

That's all I can say

** By teh way, I am using wd740gd in Raid 0 mode.
I try several bios without any prob.:D

i'd rather you not say anything more and break your trust with oskar, its really great for everybody here that your business relationship is as good as it is with him, all these beta bioses are great!

Quote:

---

Originally Posted by Onepagebook

As this effort is belong to OSkar,
I just have this beta bios couple minutes ago. It's regarding some XS friends PM me about they still got some issues on the 2.17.
As I mentioned yesterday, it could be different NVMM version package. So , here you go, this 2.18 beta bios is the old nvmm
please understand that, I can not talk about the NVMM. ;)

If you get the bios, please DO compare and confirm the results in this thread, don't just take it for granted and nothing back. PLEASE. :D

Here you go for DFI NF4 2.18 Beta bios.

---

i have not tried the 217 but with this bios gave me 30" on 1mb pì finally I can say I'm happy with my 3000 winchester with vitesta's 566 :D


cheers bud :banana:

Quote:

---

Originally Posted by enduracell

NVMM=NV memory management or what? :rolleyes:
I have to compare the bins one of this days :P
I like the often BIOS updates, good work, but I can't test it yet :(

---

maybe Nvidia Video Multi Media or Memory Management

C:\Program Files\NVIDIA Corporation\ForceWare\Multimedia\NvMM.exe

???

Quote:

---

Originally Posted by eva2000

maybe Nvidia Video Multi Media or Memory Management

C:\Program Files\NVIDIA Corporation\ForceWare\Multimedia\NvMM.exe

???

---

:D ..you 're not eva2000, you're evil2000 :toast:
but that still under bios.. :)