OH YEAH!!!! 2x256MB BH-5 @ DDR552 6-2-2-2.0-1T on Neo2 / Winchester 3200+

I've been chasing Onepagebook's BH-5 records for a while. He's like my OCing role-model :)
Since I haven't decided to jump on the DFI NF4 bandwagon just yet, this is still on MSI K8N Neo2 and AMD 3200+ "Winchester":

276x10=2760MHz @ DDR552 6-2-2-2.0-1T 3.8v

MSI K8N Neo2 Platinum - Q47353.1 0440A2 S Taiwan
A64 3200+ 90nm "Winchester" - CBBFD 0441UPCW

SuperPi 1M ( original and SSE2 ) and PiFast4.1 10M
http://www.xtremesystems.org/forums/...id=24252&stc=1

SuperPi 16M ( original and SSE2 )
http://www.xtremesystems.org/forums/...id=24253&stc=1

3DMark2001 - 32925 - http://service.futuremark.com/compare?2k1=8416820
http://www.xtremesystems.org/forums/...id=24254&stc=1

3DMark03 - 15353 - http://service.futuremark.com/compare?2k3=3680210
http://www.xtremesystems.org/forums/...id=24255&stc=1

3DMark05 - 7008 - http://service.futuremark.com/compare?3dm05=564390
http://www.xtremesystems.org/forums/...id=24256&stc=1

Aquamark3 - 90116 - http://arc.aquamark3.com/arc/arc_search.ph...unID=1225539869
http://www.clockmehigh.com/xtreme/Ne...116_276x10.jpg

And thiis is the rest of results:

Sandra 2004 - Memory Benchmark
Sandra 2004 - CPU Arithmetic Benchmark and Multimedia Benchmark
Everest - Memory Read
Everest - Memory Write
Everest - Memory Latency

http://www.clockmehigh.com/xtreme/Ne...e/3DM01_dc.jpg

http://www.clockmehigh.com/xtreme/Ne...ambient11C.jpg

Thanks for stopping by,

Michal

Looking good, keep it up. Give OPB alittle compition...:D

jjcom

that's some solid sheet bachus_anonym :toast:
real nice SuperPI times for the clock too.
I'm thinking you need a DFI to do those sticks justice though :D

Thanks a lot, guys :toast:

In a few months ( when new BIOSes come out for DFI NF4 ) I will give it a try and see If I can come a little bit closer to OPB's clocks :)

not sure if u said this, but was it prime stable? wut do u run at 24/7? and at what vdimm??

very nice results btw bachus :)

Quote:

---

Originally Posted by FlyingHamster

not sure if u said this, but was it prime stable? wut do u run at 24/7? and at what vdimm??

very nice results btw bachus :)

---

Well, I haven't run Prime95 at above settings. I've had this setup on my balcony for only about 4 hours, just to run some benches and break my personal records. To be honest with you, I think (actually, I'm 100% sure) that at 276x10 this setup will not pass Prime95 Blend torture for more that 60 minutes.

On a dailly basis, I run it @ 265x10=2.65GHz (or 260x10=2.60GHz) with about 3.7vdimm under LOAD :)

Quote:

---

Originally Posted by bachus_anonym

Well, I haven't run Prime95 at above settings. I've had this setup on my balcony for only about 4 hours, just to run some benches and break my personal records. To be honest with you, I think (actually, I'm 100% sure) that at 276x10 this setup will not pass Prime95 Blend torture for more that 60 minutes.

On a dailly basis, I run it @ 265x10=2.65GHz (or 260x10=2.60GHz) with about 3.7vdimm under LOAD :)

---

xtreme vdimm for 24/7 :P ...

But those are some nice results ... :toast:

sweet clocks mate, but how long will those sticks live at 3.8v?

is your gfx card clocked?

where's the SSE2 superpi patch for AMD64 ?

That's just some amazing benches here!!:worship:

my x850xt is on the way, I will do some 3d2001 test (LH)...:D

Quote:

---

Originally Posted by eva2000

where's the SSE2 superpi patch for AMD64 ?

---

Hey eva2000,

here you go:

http://www.xtremesystems.org/forums/...chmentid=23762

I'm only at 270 A64 tweaked (tight as possible) with 3.6v.. I'm hoping for 285ish with 3.9-4.0.. I'm on a modded 3.3v rail, so a booster would be nice..

Thats exactly where my LII stops on the same mobo Mag with tweaked settings and 3.7v

It might be that he has a newer whinny. Nice results BA:)

I see a beach towel and sunlight. You need to move somewhere colder like Michigan. Sun like 4 days out of the year and winter 6-7 months. :p:

Nice job with the benches. :toast:

did that 3200+ hit the wall at 2.7?

[QUOTE=bachus_anonym]I've been chasing Onepagebook's BH-5 records for a while. He's like my OCing role-model :)
Since I haven't decided to jump on the DFI NF4 bandwagon just yet, this is still on MSI K8N Neo2 and AMD 3200+ "Winchester":

276x10=2760MHz @ DDR552 6-2-2-2.0-1T 3.8v/QUOTE]

:D Nice clock mate, but not outstanding for BH-5 - here's mine:

http://img15.exs.cx/img15/1057/corsair2755ou.jpg

Hope to get some more out of 'em on DFI NF4......... :toast:

@HARDCORECLOCKER

You're forgetting that it's only "poor" 512KB L2 Winnie at ~2.8GHz and not 1MB L2 FX at 3.3Ghz ;) That's a different league, bud....

BTW, thanx....

EDIT: also, how's that DDR550 of yours doing as far as something more than just "not-so-demanding" SuperPi 1M?
I'm asking because I can't recall anyone else showing such a set of benches at this mem speed, except for OPB's 3DMark2001 run @ 277x12 .... Unless, you know where I can find it....

Quote:

---

Originally Posted by G H Z

Thats exactly where my LII stops on the same mobo Mag with tweaked settings and 3.7v

It might be that he has a newer whinny. Nice results BA:)

---

I think it's the board limiting the overclock.. I say this because anything over 260fsb isn't very stable.. I can run superpi over 265, but Lobby Hi will crash at anything over 262... At 3.3vdimm I can run 250fsb at ANY timings, no matter how tight, and run any app all day long.. Yet, with 3.6vdimm I can barely gain 10mhz completely stable..

This was a) with a multi of 10, so that hurts things, b) on a single channel 754, and c) on a single stick of 512..

I'm convinced that on a DFI NF4 paired with an FX, this ram will skyrocket in it's capabilities..

I'm in same boat as you Mag Master... 256 2-2-2 is rock solid for EVERYTHING at 3.2v, and at ~3.35v I can run 2x512mb tightest timings SuperPI 32MB @ 268 MHz.... but I cant get memtest stable past 260MHz no matter what timings on this VX memory... no matter what multi... no matter vCore etc.
I know I may jus need more vDimm, but it feels like something else is topped... maybe memory controller on my CH. Who knows.

bachus_anonym, I said it already but... amazing clocks dude... nice array of benchmarks too, shows your mem was (even if not 100% stable) sitting there nicely :toast:

Quote:

---

Originally Posted by bachus_anonym

@HARDCORECLOCKER

You're forgetting that it's only "poor" 512KB L2 Winnie at ~2.8GHz and not 1MB L2 FX at 3.3Ghz ;) That's a different league, bud....

BTW, thanx....

EDIT: also, how's that DDR550 of yours doing as far as something more than just "not-so-demanding" SuperPi 1M?
I'm asking because I can't recall anyone else showing such a set of benches at this mem speed, except for OPB's 3DMark2001 run @ 277x12 .... Unless, you know where I can find it....

---

:D Hey mate - didn't compare the CPU speed at all - only wanted to show the ability of BH-5........., got also 25sec SP 1M with G.Skill LA 12 x 280 at 2,5-3-3-5.

To respond Your question, I'm OPB's brother......... :p: , no I'm kidding - some people do not use A64 tweaker so they have slower results on SP but maybe higher RAM clocks....... :toast:

My BH-5 at DDR572.16
http://membres.lycos.fr/cpulloverclo...tique/33.4.gif

and a memory bench with my 3000+.... 9x multiplier
http://membres.lycos.fr/cpulloverclo...que/sandra.gif


soon, I think to get DDR580 with my BH

I don't get it, HARDCORECLOCKER :confused:
That screenie you just showed doesn't even come close to showing BH-5 ability. SuperPi 1M is VERY cpu clock- cpu L2 cache dependant, as well as Pifast4.1. Your Sandra is also higher because your CPU is clocked way higher, too...
The only reason it's 25s is that that BH-5 is paired with FX that runs north of 3.3Ghz ;). If you were on 2750Mhz Winnie instead of 3.3GHz FX you could only dream of below 30s result.

@cpuoverclock...

so it's more like DDR564 (2800/10), not DDR572...

Sandra seems a bit low though... What else can you run at this speed?

Quote:

---

BH-5 PC3200@738MHz DDR synch

---

cpulloverclock, do you hav screenies of that?!!