http://www.dfi.com.tw/Upload/BIOS/N32LD128.zip
Major Changes:
1) Fixed Data corruption under IDE/SATA mixed RAID sets
2) Bank Interleave Option
Printable View
http://www.dfi.com.tw/Upload/BIOS/N32LD128.zip
Major Changes:
1) Fixed Data corruption under IDE/SATA mixed RAID sets
2) Bank Interleave Option
Thank you, one question. Does this have the 4volt vdimm option?
:up:
No. I flashed it some hours ago. No problem yet, but also no improvement. :(
im a little out of date
has the problem with the CPU throttleing been fixed so i can disable it?
now if they could only fix the SATA problem over 240fsb :(
What problem exactly do you mean? Could you please explain?Quote:
Originally Posted by Namtaru
I'm trying to find a solution to my prob with my Lanparty UT and perhaps I have exactly that problem, but don't know it. :confused:
lol the cpu throttling problem was solved a day after the boards went retail.
OK, thx, now I know why I never heard of it. :DQuote:
Originally Posted by abstrakt
Still no fix for the probe making up random temps :(
I got it modded...Quote:
Originally Posted by impu|se
vdimm 3.2v to 4.0v enable :toast:
You can get it here: :banana:
http://s6.invisionfree.com/undercloc...?showtopic=407
fixed since the second BIOS ;)Quote:
Originally Posted by Namtaru
thanks, downloaded :banana:Quote:
Originally Posted by tictac
Does this mean the lowest Vdimm option is 3.2V?Quote:
Originally Posted by tictac
Does bank interleave work with 2x256mb single sided dimms?
No, this BIOS will enable extra 3.2V ~ 4.0V option, over 3.2V will need your PSU (3.3V rail) modded in order to work.Quote:
Originally Posted by Zeus
I got 2-way interleave enabled with my Corasir BH-5 256M*2 (module with each side has 4 ram chips)
SuperPi 8M faster 3seconds with Bank interleave enable, but 3dmark01, sandra bandwidth remain almost the same.
I haven't lost any oc or stability with this BIOS but haven't gained much either. My 3d2k1 scores went up about 250-300pts consistently ( :rolleyes: yes I know that this program is known for giving 300pt differences between runs but I am talking about an average of several runs) and SuperPI 1m dropped 1 sec but this could in reality only be like 1/10th of a second since SuperPI rounds its numbers anyway. Sisoft memory numbers completely unchanged but Sandra is reporting 4-way bank interleaving. Not having any problems but didn't really gain anything either.
EDIT: A little update - running 8m SuperPi netted a 5 second gain so there is at least a small performance benefit to be had and best of all - it is free.
Does anyone else find it interesting that Oskar initially stated there was absolutely no performance to be gained by interleaving and now they are including the option in both the NF3 and NF4 boards?
Can anyone explain what bank interleaving is/does and how much it would cause a speed boost vs stability hit?
@Tictac, I get high temp shut down with this bios(4v), Ive disabled the function in bios but still as soon as cpu temp reaches 60c it shuts down. Anyone else experiencing this?
i have no idea about that issue
i only enable vdimm voltage up to 4V
I'm using tictac's modded version of the bios, works fine. Been using it for awhile in fact. I noticed around 200mbps improvements in memory bandwidth with bank interleaving enabling in memtest, and around 100mbps in sandra. :) Plus my ram overclocked around 3-5MHz higher at the same volts. Good bios! :toast:
I just got my LP UT 250gb running tonight and loaded tictac's version of this BIOS to be greeted by memtest86+ instead of windows. I was getting quite frustrated before I realized there was a new setting in the BIOS to run memtest, which relieved be greatly because I thought I screwed something up totally in the first hour of testing. :-O
I'm really going to have to pick up one of those boards one of these days. The epox just isnt quite cutting it in terms of options.