Fortron 530W repair

lo there,
as some of you already know, from the original Fortron 530W thread, my :banana::banana::banana::banana:en PSU had died on me, & i can't RMA it. :mad:
so i'll try to 'repair' it! :rolleyes:
any way, this is the problem:
> if i run the PSU alone, & measure the +12.0v/+5.0v/+3.3v i get some very very low values on the +12.0v & +5.0v ones. the +3.3v isn't that bad. (+11.01v / +3.7v / +3.31v)
> if i run the PSU with some 'load', talking about about 6 old/bad HDD's & 2 floppy drives, i get a 'better results' like: +11.88v / +5.3v / +3.3v .
> now here is the most interesting part, if i run the same as the above, but with a 333MHz Celli & Slot1 MoBo & 128MB SDRAM, i get the following: +7v / +0.3v / +2.8v. :confused: :confused: & if i turn the system OFF, via MoBo, i get -5.0v on all rails! :stick:

so can anyone of you tell me what's going on?! i didn't use the sucka more than 48H & it did fry my NF7-S/FX5600 !!!!! :mad:

thanks in advance.


PS, i suspect that one of the main Caps is dead. take a look:

Id say its toast..maby a cap swap and a good check will fix it.right now im water cooling mine :)

any ideas, about which stuff to check?! any circuit diagrams?!... :rolleyes:

Ill tell ya what.Send it to my shop and ill have a look,if its fixable ill fix it for the price of parts :) See Our Rules Link Removed im admin there and im the machinest and moder for snt-systems

Never mind..i see your not in the US..hmm ill check mine and give u reading's with pics?

thank you very very much bud. if you have any diagrams, i have no problem to repair it. i have access to almost any part i need... & to an excellent person who would solder anything. :D

those bulges on the tops of those caps seems pretty normal for that kinda cap with the plastic housing...your readings may just be way way off...

BTW, before the PSU "died", did you play with both, the OVP potentiometers and the ones for volateg adjustment?

For me, this looks more like a short circuit somewhere, involving the -5V rail and perhaps some major adjustment of the pots.

Edit: OK, just read your first posting in the Fortron 530W thread. Looks like the PSU is just plain dead more or less. The caps look normal from your pics. nothing suspicious there. But erhaps there's a short circuit on the PCB, as I already said. Nothing more thatI can think of.

Quote:

---

Originally Posted by BB mods's

Ill tell ya what.Send it to my shop and ill have a look,if its fixable ill fix it for the price of parts :) See Our Rules Link Removed im admin there and im the machinest and moder for snt-systems

---

Dident know u couldent have links to other forum's here.... thats kinda...not good :rolleyes:

no, as i've said before, i haven't the time for playing with the pots... :(
any way, is there any way we could find the circuit diagram for this POS?! or it's a waste... :banana:

Quote:

---

Originally Posted by BB mods's

Dident know u couldent have links to other forum's here.... thats kinda...not good :rolleyes:

---

Some are allowed, it depends on what it is, and what its for. If your link had contained pertinent facts to the specific topic at hand it would not have been edited. However just pointing a link to your forum served little purpose, and offered nothing other then a reference to your forums..

Ok then..back to the problem here,take a pic of what points u want me to measure and ill give u my reading's,

those caps do look dead...

Is your electricity 110v or 220v?

220v ~ 230v, does it make any difference?!

if you didnt set the switch on the back of the PSU, yes.

come on, of course i did ;)
any other thing that we can do?! :rolleyes:

Those caps look ok to me.

The only way you might have killed them might be giving them reverse polarity, but if that was the case I would expect more damage and leakage.

The problem with PSU is that unless you know exactly how they work they are very hard to fix as such I cant offer any real advice on how to fix it.

I have fixed PSU in the past but more by trial and error than anything...

id throw it away. i mean a new one is like 80$?

Quote:

---

Originally Posted by enzoR

id throw it away. i mean a new one is like 80$?

---

But thats not the xtreme way :)

enzoR bud, i know that it's ONLY, BUT:
> PSU @ 80usd
> shipping to Israel @ 40usd
> tax in Israel @ 1.17*(80+40)=140usd which i can buy me a nice 480W Tagan ;)

besides, BB's comment is 100% true. but honestly, i have no problem to ditch this POS to the garbage, but the only thing i'm pissed of is that i didn't use it! :mad:
conclusion: NO FSP Products for me anymore, especially after the REAL NICE treatment i'v got from the :banana::banana::banana::banana::banana::banana::b anana:s @ FSP's technical/customer support. :mad:

There is a circuit diagram/description for a 200w PSU here. I've used this to repair a few 300W PSU's before. The basic layout shouldn't be too different to higher rated PSU's, so it should give a basic idea of what to look for.
IMO, those caps do look a bit dodgy, but I doubt that they would cause the sort of problems you are experiencing. Faulty smothing capacitors should only produce unstable voltages and not the sort of problem you are experiencing.

Just let me know where u want me to take reading's on mine and ill get u pics and reading's :)