OK, BH-5 on the board you concern about and how

Hi all, some of xs friends pm me and concern about how is that bh-5 work on this board(don't ask:D)
Here you go!
First of all you need to be very careful about what I mentioned before, it can be found here ! so now you know what to do when you wanna play BH-5 type memory!:D

Now, let's see some benches:

From the fsb 272.5, I can only use 3.55v (bios set 3.60v)for that to run super pi 1m, it's much accurate than Neo4's super pi 1m:D

http://www.devilsword.com/dfilpnf4dr/bh5/ddr545.jpg

then this one is because OPP ask me if 3.7v is accurate or workable; yup, buddy, it looks good to me:D

http://www.devilsword.com/dfilpnf4dr/bh5/ddr545a.jpg

now let's see the bandwidth:

http://www.devilsword.com/dfilpnf4dr/bh5/ddr545bw.jpg

ok, how about some more, for 275, I would say, it did pretty good though, still 3.7v

http://www.devilsword.com/dfilpnf4dr/bh5/ddr550.jpg

http://www.devilsword.com/dfilpnf4dr/bh5/ddr550bw.jpg


Thank you all.:D

Superb job, Onepagebook :toast: VIVA LA BH-5 !!! :D

I wonder if you'd be able to match that magic DDR575 that you did on Neo2 @ 3.9v. Do you think that 3.9v will happen?

@ OPB What would you recommend? I currently have 2x256 bh-5 that does 250mhz at 3.3vdimm. Should i get 1GB of TCCD (gskill of course :)) for this motherboard, or should I run this bh-5 at around 3.7vdimm 24/7 with a fan at like 270x10 if i get a good chip. Do you think 3.7v would be safe for 24/7?

By the way...great overclock :).

Get the TCCD, or get a gig of BH5 is proven will clock well. Check the memory section in the For Sale section. ;)

@Bachus,
hehe, you got the point!;)
Even though "my friend" said there is no difference for using booster or not, but I would assume that booster will get my bh-5 over 285 w/ 3.9v, I will try!:D

@Kobalt

honestly, I DON't think running that 3.7v 24/7 is good for that :(

Quote:

---

Originally Posted by Kobalt

@ OPB What would you recommend? I currently have 2x256 bh-5 that does 250mhz at 3.3vdimm. Should i get 1GB of TCCD (gskill of course :)) for this motherboard, or should I run this bh-5 at around 3.7vdimm 24/7 with a fan at like 270x10 if i get a good chip. Do you think 3.7v would be safe for 24/7?

By the way...great overclock :).

---

Man, you don't even know how difficult it is to do DDR540 6-2-2-2.0-1T and keep it stable for day use...
I have two sets of 2x256MB BH-5 (KHX amd Mushkin). They're both memtest-stable @ DDR520 with 3.65v but DDR540 is just possible for benches only :(
BTW, 3.7v is quite a voltage to be run 24/7 but ( I do it. though :cool: )... you just have to have no fear and confidence in your sticks that they take it easly :D

I thought so...oh well it was worth it

i think OPB is lying to me. He just wants Gskill to get another 275$ off a 1gb LE pack :mad: :mad:







just joking :toast:

you and your damm 0438TPMW ;) thats one mighty fx55 :) awsome ram work as always. :) and nice timings selections :)

Quote:

---

Originally Posted by Kobalt

I thought so...oh well it was worth it

i think OPB is lying to me. He just wants Gskill to get another 275$ off a 1gb LE pack :mad: :mad:







just joking :toast:

---

you...you...you scare me :stick: :D

hey kevin, can you run some sandra benches with around the same 3430mhz cpu speed that u ran with the gskill in ur other thread

Maybe u can Test 2 x 512MB BH5 too?

Regards.

Onepagebook, do you know the chips of the Corsair 2x512mb CMX3200LL rev1.1 Pro Series?? ch5 or bh5? :cool:

BH5 powa!! :banana4:

Quote:

---

Originally Posted by Umek

Onepagebook, do you know the chips of the Corsair 2x512mb CMX3200LL rev1.1 Pro Series?? ch5 or bh5? :cool:

BH5 powa!! :banana4:

---

hould be bh-5, I am not positive.

**yup, lol, someone get me 2x512 bh-5... :p:

BH-6 might be able to take that kind of voltage.

Quote:

---

Originally Posted by Onepagebook

**yup, lol, someone get me 2x512 bh-5... :p:

---

I've got Kingston and Corsair BH5. Take you pick. :D

Quote:

---

Originally Posted by Jupiler

I've got Kingston and Corsair BH5. Take you pick. :D

---

:slobber: ...you serious? :D

Awww, kinda makes me wish I didnt sell my BH-5 to get TCCD

Quote:

---

Originally Posted by Umek

Onepagebook, do you know the chips of the Corsair 2x512mb CMX3200LL rev1.1 Pro Series?? ch5 or bh5? :cool:

BH5 powa!! :banana4:

---

It is bh5 :toast:

can you try bh-6 with higher volts?

OK, thank guys!! ;)

bye!

OPB, how about 2*256mb KHX3000 singlesided BH-5 rams :confused:

Pro Series are N-O-T BH5! They are ALL CH5!

Please, do not post false information...