something dead?

i have a dfi lanparty with a 2500m amd and watercooling. i woke up this morning to a frooze computer and a puddle of water on the proc and alil on the mobo. the proc has clear nail polish and dielectric grease on it. last time this happened it was fine. i let it fry out all day today and still not working..

this time it just keeps freezing and when i try to boot to windows i get a blue screen saying ACPI isnt enable or something wierd....

this thing freezes with stock bios, stock settings, in the bios setup!

i put a throughbred 2400 in to see if proc and no post.

threw 2500 mobile in again and it boots but freezes and does wierd stuff.

i put air cooling back on for now and the thing just isnt workin...

sounds like dead board doenst it?

It might be dead, but ussually dead boards won't boot at all. Try clearing the cmos (as you might have already tried). Also, you may want to re-format, the freeze may have created a collosul windows error and screwed up the install.

Quote:

---

Originally Posted by Jrocket

It might be dead, but ussually dead boards won't boot at all. Try clearing the cmos (as you might have already tried). Also, you may want to re-format, the freeze may have created a collosul windows error and screwed up the install.

---

thought about that too so i tryed to start to windows cd. i reset bios and even recopied a new one (ioss bios saviuor :p:) when i try to boot to a cd it doesnt even try to read it. i have it set to the first boot device in bios too. loaded optimized and everything.

im almost sure the board it junk now. this thing locks up in the bios!

newegg let me rma it :D

Good for you. Newegg still rocks! :up:

Quote:

---

Originally Posted by omega65

Good for you. Newegg still rocks! :up:

---

yep :)

anyone know how good newegg is about taking boards back that have condensation proofing on them? i have like silicon on the chokes on this other infinity i have and i was wondering if they would take it back like that? some dielectric grease in the socket too. the guy from newegg told me the rma center will probly send it back but he dont know...

ty

Clean it as well as you can! They might overlook it...

Quote:

---

Originally Posted by omega65

Clean it as well as you can! They might overlook it...

---

ha yeh right

look at the pic i attached. the silicon is REALLY on there...GE 2 :bows:

Whew! Good luck with that! :rolleyes:

Quote:

---

Originally Posted by omega65

Whew! Good luck with that! :rolleyes:

---

:bananal:

:YIPPIE:

Give it more time to dry out properly.

Quote:

---

Originally Posted by abstrakt

Give it more time to dry out properly.

---

you think it will work after that? i already got rma stuff and cleaned the board all up...

Photo? :D ;)

Be happy you can RMA it. I can't - I can't get the heatsinks down from it :( :( :(

BTW, any chance you can measure the components on the dimm mosfets part of the mobo? ;)