jnr4817's New Watercooling System

To keep things in their place I decided to make a thread for you about your watercooling setup.

Anyway, you said you have unlimited money on this so here goes..

Pump: Iwaki RD-30 with 24volt meanwell power supply
Radiator: Dual heatercores, 2-302's custom made by weapon with his custom shrouds
Tubing: Tygon R3606 (i think that is the number)
GPU: Silverprop fusion HL
CPU: Now this is based on availability... best is at hte top of the list but not neccsarily available.
1.Storm G5
2. Storm G4
3. Danger Den RBX

Out of those 3 the RBX is the only one that is readily avaialable on the open market. The other two (the storm blocks) are created by one of our forum members cathar and they are in short supply and have a long waiting list.. I would suspect it would be before april before you could get a G5.

You will also need a resivour. You can get one of those at danger den or frozencpu. either way ur in good shape for that.

Other things ull need include zerex racing cooling (get it at danger den) and hose clamps. The hose clamps get from wherever u like best. lol..

If you got any more q's just ask. Im guessing you'll want to know where to get all this s tuff and how much it will cost.. I will make a new post for that if you are finalized on what u want.

okay we are done:
jnr come back when u have the setup and tell us your results

btw: hosing 3603 is right
got some on my desk ;)

A new block which you could buy:
Dtek Whitewater (better then rbx?)

Other blocks which u might find 2nd hand:
Cathar's Cascade
Little River Whitewater

i dont quite get the point of this thread ...your trying to build a WC setup for someone? or yourself?

its just a thread for "jnr4817" watercooling hardware

jnr was asking about an ew setup in my pumps sticky and I didnt want it to get cluttered with non pump stuff so i brought it over here...

RBX with any nozzle will outperform the WW. Especilally with the #4 or #5 nozzle

Doesnt seem like it on pro-cooling
but nozzle nr 5 might do the trick :)

yah it will... i get my info for blocks from pro cooling...

ok, cool. the only thing i was wondering about is i really dont wannna stray from 12v psu due to the fact that i have a 600w x-connect and its pretty.

so what pumps can i use now or if i can regulate the voltage in any way.

Get the Iwaki MD20 RZT from Custom Aquatic...I got mine in 3 days from when I ordered lol when they said it would take 2 weeks. :) Best pump you can get next to the RD series.

jnr, well the only pumps that you can get are the mcp600 mcp650 and the DDC. Those are the only 3 that i know of that work on 12volt. out of the 3 i suggest getting the mcp600. Its not called the aquaextreme 50Z at cooltechnica.

But you said that you have alot of money, so i suggest getting two of them and running them in series. That will give you near iwaki performance and you can still run it off of the 12volt line..

you can get the pumps at www.cooltechnica.com

if i did get the iwaki, what would i have to do to run it off my psu or whatever.

also where would i get all the parts listed.

Pump: Iwaki RD-30 with 24volt meanwell power supply
Radiator: Dual heatercores, 2-302's custom made by weapon with his custom shrouds
Tubing: Tygon R3606 (i think that is the number)
GPU: Silverprop fusion HL
CPU: Now this is based on availability... best is at hte top of the list but not neccsarily available.
1.Storm G5
2. Storm G4
3. Danger Den RBX

You'd be a little hard pressed to find an RD-30, but I believe MaxxxRacer should know one vendor. They are expensive though... something like $250?

You can get the heatercores from Auto Zone, Advanced Discount Auto parts, NAPA, etc. Weapon (a member of the forum) also custom makes shrouds for this heatercore, as well as mods this heatercore for easy use (installation of 1/2" OD barbs).

Tygon you can get from DangerDen, usplastics.com and a number of other e-vendors that sell watercooling parts.

Silverprop blocks are sold at a limited number of vendors: PC Case Gear, Best PC Mods, Frozenmods and Criticool.

The Storm G5/G4 blocks are sold by Cathar (another member of the forum) and have a very limited availability. They range from $100-$200 USD (sold from Austalia).

The RBX is obviously available at Danger Den.

Google will help you locate all of these parts.

q about pump od's. what is the od of the pumps them selves and what do i have to do to adapt it. i am guessing 1/2" is the standard for best flow.

i am guessing the 2-203 radiator is the best rad for the money and cooling, and it fits 2-120mm fans. what is the exact name for the 2-302, what kind of car. is anything better.

2-302 is a '77 Pontiac Bonneville w/ AC

thanks for the help torin.. Ive been off killing my A64 cpu the past few days...

there is no way to get the rd30 to run correctly from your psu... it doesnt give it enough voltage.. running it at 12volts would defeat the purpose of getting the pump.

here is a place that you can get it http://www.ryanhercoproducts.com/Au...SEC=640&GRP=400 price is not listed but its 250 bucks.

as for the rad, just contact weapon.. he makes custom modded 2-302's. get the shroud and fans at the same time from him..