2600 Mobile @ 2.82ghz ON AIR

lol just got this chip and it keeps going and going and going. all on a SP-97 and thnx to the cold air down here in TX :D

http://webpages.charter.net/chineset...ts/2.82ghz.jpg

gonna run 3dmark and see if she can pull through. :) does 36 sec sound about right for that speed?

pretty sure its a IQYHA 0401XPMW. 245x11.5 @ 1.925vcore in bios, 3.2vdimm, 1.7vdd. temp @ 41 C. (I think my LP-B is dying.. any fsb over 245 "disables" my pc and it acts like a 1ghz comp. for example at 246x11.5 my superpi would be like 52 sec)

Oh wow!! I'm so jealous!! I can only get to 2400Mhz on mine :( I might get another and sell this one on ebay though.

Nice man. That extra fsb really helps. i was able to get my athlon up to 2.8 but the memory controller was garbage (hey just like my winnie!!) so i couldnt get higher that 225 fsb on it.

for super pi i got 37 or 38 at 2.8 so u are looking good.

i have the same stepping but mine only does 2.68 :(

i guess i need some freezing air

Quote:

---

Originally Posted by MaxxxRacer

... i was able to get my athlon up to 2.8 but the memory controller was garbage (hey just like my winnie!!) so i couldnt get higher that 225 fsb on it.

---

Mmmm, no actually its not at all like your winnie.
A64 = on-die mem controller, AXP = not. :rolleyes:

Mine's IQYHA too. Guess I have a bit of a 'dud' chip. I'm only using a Zalman flower cooler though. It posts at 2500 but refuses to get to Windows unless I give it 1.825V and then isn't stable. Strange because it runs 2400 solidly at just 1.675-1.7V.

ghost ROFL! :lol: I know the winnie is on die.. Im saying its on die controller sucks as much as my nforce 2 memory controllers in the chipset....

Good going, my 2500M needed 2.1v to hit 2.8Ghz on air 3D stable.

2500M 0409, "i" stepping... gets to windows benchable @ 2642 on 1.775v, this is memtest, on same voltage @ 2.866... The chip needs burning in to higher voltage, above 1.85 ish it wont boot on ANY clockspeed.... cooling is thermalright ALX800.
Theres more to come from this chip too... Pitty its me housemates though, dont get the playtime required to fully max it :(

http://www.drunken-student.co.uk/pics/pc/2866.jpg

Even SuperPi 32M is not really a stability check, it could be stable at 2,6 or even less.

All that trouble for 36 sec SuperPI?
Time to move on on AMD64 man, this is like "here's my Duron overclocking marvel."

All that trouble ??

That's what oc's about and if you think this is trouble, then you really wouldn't like to know what I did to get 34secs on my old Tbred :p:

Quote:

---

Originally Posted by joe2004

All that trouble for 36 sec SuperPI?
Time to move on on AMD64 man, this is like "here's my Duron overclocking marvel."

---

if hes happy with his overclock whats the problem?

Quote:

---

Originally Posted by sjmX`

if hes happy with his overclock whats the problem?

---

sorry don't get it, who's happy ?
:confused:

he was talking to the other guy
at 2.8ghz its equal to a newcastle at 2.4ghz
:)

Quote:

---

Originally Posted by joe2004

All that trouble for 36 sec SuperPI?
Time to move on on AMD64 man, this is like "here's my Duron overclocking marvel."

---

who went through a lot of trouble? how hard is it to enter bios and hit f10.. :stick:

I just made this thread because 2.82ghz on a mobile on air isnt something u see everyday, not because I wanted to show how much "trouble" ive been through. :rolleyes:

How cold was the air? I can't reliably boot over ~1.9vcore, but it is probably my PSU. I can hit that speed, not stable, and hit that fsb, also not stable, but this is at 40c and my psu is not very good. I hope to try the cold air this winter. Your Super Pi looks right, at 2.78ghz, I got 37 seconds.

Not bad. Mine only does 2.6 on Air! Have to buy Water Cooling!!!

IQYHA0352RPMW and IQYHA0401XPMW ... are ocing XP-M dream :D

XP-M can be most fun processor ever, relatively cheap, ample performance and they really fly!
Kudos on the massive OC!

Quote:

---

Originally Posted by FlyingHamster

... does 36 sec sound about right for that speed?

---

Great AC OC ( :D )
But super PI not great
(NF7-S, mem BH6 1:1 2-2-2-11 dual)

http://members.lycos.co.uk/yotomecze...0fsb%20258.JPG

257 Fsb....

IQYHA 0401XPMW seams to be a kick-ass stepping :D

My chip does actually do 2800 Mhz prime stable @ 1.78v, but with Prommy though :)

Quote:

---

Originally Posted by yotomeczek

Great AC OC ( :D )
But super PI not great
(NF7-S, mem BH6 1:1 2-2-2-11 dual)

---

superpi not great? your clocked at over 10 FSB higher than me and your superpi is 1 sec faster. Im not saying mines fast.. but wow :stick:

when youre ready to sell that chip...shoot me a pm :)