A64 3000+ Winchester O/C adventures...

A64 3000+ Winchester CBBFD 0442SPMW
MSI Neo2 - S/N is K0410xxxxxx | Q47353.1 0440A2 S Taiwan
OCZ 3200 Platinum rev2 (2x512)
OCZ 520W
Gainward 6800GT 'GS'
etc...

http://arturd2.customer.netspace.net...000+280HTT.JPG

Not bad ey? 720Mhz o/c on 1.4vcore
I had to relax RAS to CAS to 4 to run 1:1 as it wasnt 100% stable at 280Mhz 2.5-3-3-7 timings, i could 3D/games and et... but im looking for stability.
I looped super_pi 32MB pass 3 times and same with 3DMark03-05. Really is time consuming but from the results sure was worth it :D

Find your max clocks. I would like to know if these new weeks are clocking higher, or just reaching these clocks with lower voltage.

Quote:

---

Originally Posted by CTKP

Find your max clocks. I would like to know if these new weeks are clocking higher, or just reaching these clocks with lower voltage.

---

Yeah thats my aim, as i said its time consuming to run all the tests.

nice
where did you pick the chip up from? there doesn't seem to be any stock around in sydney
Seems all > week 40 chips are doing pretty well
Seen a week 44 3200+ 939 doing 2750 stable with 1.6v stock cooler

Quote:

---

Originally Posted by ArcTan

nice
where did you pick the chip up from? there doesn't seem to be any stock around in sydney
Seems all > week 40 chips are doing pretty well

---

Picked it up in my local retailer located in Kingsford, last one too :D
There was a period for about 1-2 weeks where no one had stock of the 3000/3200+ now theres few places that have them and its week 44. I dont know if yuou be able to find week 42 anywhere in Aus but im sure week 44 will clock better, well some do some dont as you know that your self.

Quote:

---

Seen a week 44 3200+ 939 doing 2750 stable with 1.6v stock cooler

---

Thats impressive, im hoping this chip will get me there. its clocking really well but sometimes it gets to a point where no matter how much vcore you give the chip it just wont go as this happened to my 3200+.

Good job r2 :toast:

btw could you mail that expertool to me plz?

Quote:

---

Originally Posted by Garrett

Good job r2 :toast:

btw could you mail that expertool to me plz?

---

My guess is a tool supplied by gainward am i right ;) ?

Yes Expertool is provided by Gainward, not sure if it will work with non-Gainward cards though, ive sent you a link.

Ill have some more results in couple of days, really hitting the end of my ram at 2.85vdimm and i just sold my booster :rolleyes:

http://arturd2.customer.netspace.net...+290HTT5.6.JPG

Did try running the above at 1.4vcore but i couldnt even pass super_pi 1Mb pass, using 1.45vcore i was able to pass 32Mb run BUT failed Stresscpu after 3hrs, so i knew increasing the vcore to 1.5 would pass stresscpu :p:
I had to use deviders 5:6 as i recently sold my booster :rolleyes: or unless i set 'DRAM DRIVE Strenght - 'WEAK' in the bios but im maily testing the cpu so wasnt worried.

Edit:BTW this is on AIR

nice
I'm gonna see if there's any stock at the comp fair this weekend

Quote:

---

Originally Posted by ArcTan

nice
I'm gonna see if there's any stock at the comp fair this weekend

---

Where abouts is the fair?
UNSW Uni?

Quote:

---

Originally Posted by [ r2 ]

Where abouts is the fair?
UNSW Uni?

---

unsw is on sunday
I'll be at the parra one the day before since I'm out west
The only time I'm ever in kingsford area is to buy fish from Slippery Little Suckers