yes :banana:
Stepping SL7PM
OEM. :toast:
put this baby undersome tests..
on air and vapo :slobber:
check it out ..
On Air temps varied for 45 Idle up to >65 load
Printable View
yes :banana:
Stepping SL7PM
OEM. :toast:
put this baby undersome tests..
on air and vapo :slobber:
check it out ..
On Air temps varied for 45 Idle up to >65 load
On vapo .. i go
ALl tests done on stock volts.
4.2 crashed after 30 mins or so :(
my mach is making ticking tocking noises
must investigate.
I guess this cpu has much more.
Possible 4.5 gig ..... :slobber:
I wanna see how the Prescott E0 478s do. Go for it ibby!
give her more voltage :)
the 3.2 EO will probbly get to 4200 stable or 4300
i would rather pick up a 3.8 EO for 400 in a few months
but by then the intel will 2mb cache in all its chips
haha
and the os isn't clear...very nice "toy" ibby! :toast:
Where was this purchased from? I am debating whether i should update my intel rig to 775 or stick with 478, seeing as though i would then need to also purchase ddr2/pci-e gphx/mobo.
yes only 1.3v is ridiculous
put 1.5 and more please :D
Iam based in the UK.
I got it from a uk based supplier and it was OEM.
Is is the stock mach 1 unit.
I am not sure how much more it can take.
| am idling in + tempratures now.
The IC7 Max 3. Does it overread / underrread the temps ?
and are they read from the socket ? or a diode from the cpu ?
What memory do u guys recommend to use with, my ic7 max 3,
that does high FSB but low volts.
Ibby
I think the IC7 series in general are known to report way too high temps. Something like 10c above the actual temp. :)Quote:
Originally Posted by ibby
And i believe it reads temp from a diode in the cpu.
To "easy" get fx 250 1:1 at pretty low volts something like 2.9-3.0 then i would get the Crucial Ballistix.
It's been a while since i used Intel so please get some Intel-dude to confirm.
Nice OC btw :D
my pc4000 giel does 260fsb ish
and then craps out.
so i really need sumat which will hit
260+ at low volts. 2.8v 2.9v
I have to run the 5:4 divider, and iam only hitting
21k on 3d mark 2001.
really I should be hitting more than that. - Well I think so.
(9800pro)
right guys, after some of your loving, and encoraging me to up the volts,
here is what I got.
Notice Idle and load temps. I managed to get to windows at 4.4 gig, but was crashing.
SO didnt bother with a screeney ..
Memory running at 5:4 2.9v
cpu volts 1.5125 > in the BIOS.
I need better cooling. "stable so far in windows, just under 1 hour" with CPU burn.
If I could achive lower temps at the core / load then i could get more FSB.
Screenies :banana:
Max voltage used 1.5125 > looking into regass now :p:
Do u know if overclockers.co.uk has some E0 in stock?
dont know. are u wanting one ?
Ill see if i can find some one with them in stock.
Dood, you have a Vapo - put 1.6 through it! :stick:Quote:
Originally Posted by ibby
ok the guys who i bough the 478 pin cpu from has 1 left of the E0.
(hes on ebay with very good feedback) he wants £105 > buy now.
Let me know cpulloverclock if you want it.
ill tell him to save it for you.
Pm me ill give u the link and info for the guy.
I want a 3.4EQuote:
Originally Posted by ibby
is that an 3.4 gig E0
?
id like one of them as well.
yepQuote:
Originally Posted by ibby
I want one of them
iam looking for one, cant find one atm
My Intel "insider" offered me one at $400.... (3.4ES E0)Quote:
Originally Posted by cpulloverclock
He sold them in about 2 hours....
C
Where do you get Intel "insiders" and how much do they cost? :D
lucky guy :cry:Quote:
Originally Posted by charlie
400$ is a reduction or not???
:mad: :mad: :mad: :mad: :mad: :mad:
:( charlie next time u get a cpu along those lines.
i want to buy one :)
My Giel mmeory has developed a fault.
Its got errors on it :(
so no overclocking now