In theory?

Printable View

08-24-2004, 06:53 PM
trans am

In theory?

Hi everyone. I have a o/c question.

I am able to do 2650mhz stable (265x10)default multi

I can do 300ht (300x6) (166 ram divider)

my ram will do 250(ddr500) at 1:1

so in theory, wouldn't I be able to do the following?

288x9=2650mhz?
ram 166
ht link (3x)
vcore 1.7v
vdimm 2.9
chipset voltage (default)
(2.5-2-2-10) 1T

So why can't I do it? I tried and it wouldn't even post. Is it a voltage issue? My 12v line is perfect. I have a 520 ocz powerstream. see sig.

however, I can get 291x9=2622.4 but I'm running ram using 133 divider (187.3) under ddr400 speeds. wtf?
08-24-2004, 08:08 PM
Stang_Man

in theory you can walk through a wall...

the settings dont wanna play nicely together as it's putting more stress on the components..

i can run 2800Mhz, i can run also 245FSB, but if i try 2800mhz and 245fsb it wont' work cause it's more work..
08-24-2004, 11:28 PM
xtrempinoy

i was reading somewhere, at around 250mhz HTT on the processor, the system becomes unstable when using 1:1 divider..

drop the multipier, and use your HTT and 1:1 divder, to test everything out, and if that doesn't work, i have no other ideas
08-25-2004, 05:45 AM
trans am

.................................................. ...................................nevermind.:roll eyes:
08-25-2004, 10:36 AM
thephenom

Quote:

Originally posted by trans am
.................................................. ...................................nevermind.:roll eyes:

Ya....theory VS reality can be harsh sometimes.:p:
08-25-2004, 10:43 AM
Rukee

my 3500EBs want CAS3.0 over 230fsb, doesn`t seem to matter much as the bandwidth is insane anyway at 260fsb 1:1
08-25-2004, 11:06 AM
trans am

1 Attachment(s)

Quote:

Originally posted by thephenom
Ya....theory VS reality can be harsh sometimes.:p:

It's not that I'm asking for a miracle and this isn't out of the question. I just can't figure out why I can't run my ram at 166. I will try cas 3 and relax the timings a bit.
08-25-2004, 11:07 AM
trans am

1 Attachment(s)

Ram under ddr 400 speed:(
08-25-2004, 11:43 AM
Rukee

you got your sticks in the right memory slots???
You`re not running in Dual Channel.
08-25-2004, 11:49 AM
MusicIsMyLife

Quote:

Originally posted by Rukee
you got your sticks in the right memory slots???
You`re not running in Dual Channel.

He´s running S754.

S754 = single channel. ;)
08-25-2004, 12:00 PM
Mariachi

Try swapping the dimm's.
08-25-2004, 03:43 PM
trans am

Never mind. Thanks everyone, I changed from cas2.5 to cas3 (3-2-2-10 1T) Everything worked fine!:toast:

http://forums.extremeoverclocking.co...chmentid=44599

http://forums.extremeoverclocking.co...chmentid=44600

http://forums.extremeoverclocking.co...chmentid=44601

http://forums.extremeoverclocking.co...chmentid=44602
http://forums.extremeoverclocking.co...chmentid=44603
08-25-2004, 03:52 PM
Rukee

Quote:

Originally posted by MusicIsMyLife
He´s running S754.

S754 = single channel. ;)

Doh!! :o
09-03-2004, 10:26 AM
trey

Quote:

Originally posted by trans am
Never mind. Thanks everyone, I changed from cas2.5 to cas3 (3-2-2-10 1T) Everything worked fine!:toast:

http://forums.extremeoverclocking.co...chmentid=44599

http://forums.extremeoverclocking.co...chmentid=44600

http://forums.extremeoverclocking.co...chmentid=44601

http://forums.extremeoverclocking.co...chmentid=44602
http://forums.extremeoverclocking.co...chmentid=44603

the pics dont work, how much better was it with cas3 and the settings u wanted?
09-03-2004, 01:34 PM
drcrawn

when my comp wont POST i get really scarred....trans am that is an awesome avatar. "Jordi's" kid went to my local high school and played on the basketball team with my gradeschool friends...

i lived on chambers and broadway too for awhile, enjoying that RNC convention?