DDR333MHz @ DDR490MHz

Printable View

07-28-2004, 09:53 AM
DMylonas

DDR333MHz @ DDR494MHz

Hello to everybody,

At September 2003 I bought a NoName 512MB PC2700 DDR333MHz with Infineon chips. Five months later I started the burn-in of that module. I burn-in that module for over 500hours :eek: and take me about 3 months to finish it. The maximum voltage I gave to that module was 3v, from 2.5v (default). Now I buy a P4 3.0C and I start the burn-in again using 1:1 dividers on my Abit IS7-e. I don’t know if that is a record or impossible to do it on a NoName memory module, but I’m surprised from that memory…

I cool the memory using the Tt Alu Heatsink and a Tt SmartFan2 8cm…

Until now the rock stable result are the following:

http://img.photobucket.com/albums/v3...mem333-333.jpg

http://img.photobucket.com/albums/v3...333-333_02.jpg

http://img.photobucket.com/albums/v3...mem333-436.gif

http://img.photobucket.com/albums/v3...mem333-440.gif

http://img.photobucket.com/albums/v3...mem333-460.jpg

http://img.photobucket.com/albums/v3...mem333-470.jpg

http://img.photobucket.com/albums/v3...mem333-480.jpg

http://img.photobucket.com/albums/v3...333-480_02.jpg

Finally, but with some errors at, MemTest+ 1.20…

http://img.photobucket.com/albums/v3...mem333-490.jpg

Now I try to "catch" the 500MHz… (sorry for my bad English)
07-28-2004, 01:32 PM
Vryada

o_o whoa its some kinda strange that that memorys could get that fsb...
07-28-2004, 01:34 PM
Jrocket

Nice oc, sometimes you can get lucky with the generic mems. Could you give us a picture of the heatsink attached to the memory?
07-28-2004, 02:11 PM
Kriller

245 Mhz is really good for one who is 166 @ stock....
07-28-2004, 09:08 PM
DMylonas

1 Attachment(s)

I use the following heatsink, but i put AS Ceramique.

http://www.thermaltake.com/support/i...emory/op01.htm

A photo from PC Wizard 2004....
http://img.photobucket.com/albums/v3...333-480_03.jpg

Sorry for the bad photo, but my camera have only 1.3megapixel....
07-28-2004, 10:15 PM
Dagalidis

Nice work dmylonas....:D
Keep going and maybe you can reach DRR500.....:banana:
07-29-2004, 06:48 AM
DMylonas

I'm back again... After a lot of burn-in.... My module run at 243MHz rock stable with 2.9v...

http://img.photobucket.com/albums/v3...333-486_01.png
07-29-2004, 08:45 AM
DMylonas

My module can run at 247MHz - DDR494Mhz but after 1 minute in MemTest+ 1.20 it give me a lot of errors...

http://img.photobucket.com/albums/v3...333-494_01.jpg

I will continue the burn-in tomorrow morning.... Now i go for :toast:
07-29-2004, 12:28 PM
Low

nice oc but do you sure thats no 6a chips or relabeled bh5/5 ?
07-29-2004, 12:30 PM
STEvil

try 3-4-4-8 ;)
07-29-2004, 01:07 PM
-=TriX=-

that is some damn fine work, DMylonas! I used to have some generic PC2100 that did ~DDR440 w/ 2.9v. Didn't ever find out what chips were in them before I sold the suckers.
07-29-2004, 02:06 PM
thephenom

too bad it's still in single channel.
07-29-2004, 02:57 PM
STEvil

single channel is only 5-10mhz faster, if you are lucky.
07-29-2004, 03:01 PM
Bennah

Worth a go though ;)

How is the fan held over the ram? maybe I can do that with my OCZ EB when I get it, to cool it well with a 80mm fan. I would be trying for some high fsb.
07-29-2004, 03:27 PM
Staphylococcus

You want crazy RAM ?
Here : -

http://www.bbpix.com/pix/264.jpg
07-29-2004, 04:00 PM
HawainPanda

holy crap that's nice
07-29-2004, 04:55 PM
pik-ard v1.1

Quote:

Originally posted by Staphylococcus
You want crazy RAM ?
Here : -

cant see that picture nomatter what i do with it. :stick:

EDIT: got it. for those that cant view it, go to this:

http://www.bbpix.com/pix/264.jpg

then delete the /pix/264.jpg part to bring you to:

http://www.bbpix.com

then hit back. that SHOULD let you view the picture.

:rolleyes:
07-29-2004, 08:53 PM
DMylonas

Quote:

Originally posted by Low
nice oc but do you sure thats no 6a chips or relabeled bh5/5 ?

She has the following chips....

http://www.biwa.ne.jp/~yok/Infineon-5-3ten.jpg

------------------------------------------

Quote:

Originally posted by STEvil
try 3-4-4-8 ;)

When i change the 5 to 8 the mobo gave me a lot of stupid beeps....

-------------------------------------------

Quote:

Originally posted by Bennah
Worth a go though ;)

How is the fan held over the ram? maybe I can do that with my OCZ EB when I get it, to cool it well with a 80mm fan. I would be trying for some high fsb.

I have tape him on the psu to mobo main cable...
07-29-2004, 09:39 PM
Mongoose420

i had a single 512meg dimm of samsung pc2700 that did 240 on my nf7-s 2.0 at 3.0vdimm. i thought it was odd at the time. I believe it would even 3d bench at 230mhz 11-3-3-2
07-30-2004, 09:50 AM
MkzK

1 Attachment(s)

here are mines Bt-5 :rolleyes:
07-30-2004, 12:20 PM
DMylonas

"MkzK" your module is PC3200 DDR400Mhz.... The 260MHz - DR520MHz, are good.... Can you reach the 300MHz - DDR600MHz with that module?
07-30-2004, 12:29 PM
MkzK

i ll try their best.. until now thats what they can do i tryed 1 stick and it could make 270 fsb but reboot after a few seconds.. i ll try a better cooling they just have a heatspreader that i took off my old corsair ddr500 (they sucks hard)