Printable View
Ok last night i broke my LTD record..... :banana:
Set LTD X 5 (1000) and raise FSB up to 260 MHZ @ CPU X 8 @ MEM 1:1
Still dont believe it but is true......
System is rock stable at 258 FSB but no stable at 260 (LTD 1300) on 3DMARKS......
Now i have biger room to play with..... :D
I will do more because i think this is NOT the MAX i can GET.....
Also please Note that i use 4 BANKS (2x512 MB ADATA VITESTA Double Sided) at CMD 1 ...
ENJOY with me.....http://www.thelab.gr/images/smilies/hehe.gif
Too bad it doesn't make a LICK of difference when gaming, since LDT of just 600Mhz is already a lot faster than AGP8x.
But it proves his penis is the biggest.
:lol: :ROTF: :ROTF: :rotf: :rotf:Quote:
Originally posted by Lithan
But it proves his penis is the biggest.
No doubt
And still raising.... :D
Right now 280 x 5 = 1400 HT :banana:
I will post new images when reach top limit ..... :D
Nice job, Dagalidis! :toast:
Does this high LDT make any difference in 3d mark?
Nice,
But what difference does it make?
afaik it doesn't do much for performance. I only see it as a factor to control the mem and cpu speed.
Not much.... but yes there is a small increase..... like 200 points on 3DMARK01 but i cant tell you for sure right now....Quote:
Originally posted by Zeus
Nice job, Dagalidis! :toast:
Does this high LDT make any difference in 3d mark?
When i will reach MAX limmit i will BENCH at x1 - x2 - x3 -x4 - x5 LTD keeping CPU MHZ at same MHZ and Post again.... :D
On the A8V the best I could manage was 302HTT @ 5x
C
you got around the 4x ldt with locks bug? i cant get 5x ldt to actualy work on mine, been up to 280 x5ldt but it only gives 4x effective.
When I changed to the PC3200 memory it allowed 5x, with divider in place it forced 4x, of course i only checked it w/Sandra, but it displayed 5x (1510mHz)Quote:
Originally posted by Mongoose420
you got around the 4x ldt with locks bug? i cant get 5x ldt to actualy work on mine, been up to 280 x5ldt but it only gives 4x effective.
wierd the only way i can get 5x is if i disable the locks. divider or not with 4 diffrent sets of memory(1 set pc3200, 2 sets of pc3500 and 1 set of pc3700)
What speed was your memory running at Charlie. It seems to me that LDT is more a function of memory speed then fsb. The best I've done with a nforce board is 268 X 4. There's minimal if any differnce between 4 LDT and 3 LDT in 2k1
yah i am VERY curious wether this will make a big difference in 3d or basically none at all, or somewhere in between. bench awayQuote:
Originally posted by Dagalidis
Not much.... but yes there is a small increase..... like 200 points on 3DMARK01 but i cant tell you for sure right now....
When i will reach MAX limmit i will BENCH at x1 - x2 - x3 -x4 - x5 LTD keeping CPU MHZ at same MHZ and Post again.... :D
WHere else other than sandra can the LDT value be checked. on the A8V Sandra reports 2x800 no matter what speed I run the system at.
nice; performance aside an record's a record...
is the kv8pro a board you would recomend over the shuttle an51r in terms or ocability and stability?
so did u test the differences in 3d at different LDT speeds?
crap
Yes......Quote:
Originally posted by blinky
so did u test the differences in 3d at different LDT speeds?
But wait one more day my friend...... Still playing with HT MAXOUT....:D
But generally from HT X 2 to HT X 4 there is a gain of 300 Points of 3DMARK01 ....
From HT X 4 to X 5 about 30 points gain...
But please wait cause those BENCHES are not for sure.....
Tommorow will post many Benches Like 3DMARKS01 - 03 / SUPER PI / FAST PI / AQUAMARK03 with HT multis.....;)
ok sweet im looking forward to it ;)
Edit: Whoops, realized I was mistaken. Nice! :thumbsup:
any updates man?
Blinky sorry for this delay ... but benches are HERE