Printable View
MOBO: EPOX 8KDA3+ nForce3 250GB
RAM: A-DATA DDR500 512MB*1 D5 1T
VGA: MX-440 64MB 4X
HD: WD-360GD*2 SATA RAID0
PSU: ENERMAX 350W
COOLER: HYPER6+3000RPM
CPU: A64 3400+ CG stepping L2 1M
vcore 1.7v my bh-5 can't run 220fsb 2-2-2-5 up so I used a-data 512mb ddr500 at 2.8v 5-3-4-2.5 Timing
http://home.pchome.com.tw/school/qk4722/339.jpg
http://home.pchome.com.tw/school/qk4722/3726.jpg
Nice chip! and nice overclock on air too.
These cg clawhammers seem to clock nice and hold temps very well on air.
Some bh-5 @ 5-2-2-2 cmd1 1:1 would add about 400mb/s to your bandwith at that cpu speed with 10 multi.
Here is bh5 compare for you:
http://pic8.picturetrail.com/VOL256/...6/57610403.jpg
You have a good overclock for 3400+ on air! Too bad you cant get your bh-5 to run....whats the problem? Need more vdimm?
Are you trying bh-5 with one stick or two? 256 or 512?. I am very interested in that epox board and you got me wondering if it has issues w/bh-5.
Very nice clocks, I have a 3400+ CG coming tommorrow so I hope I can get the sort of results you're getting, despite my MSI Neo Plat being a finicky bugger, lol. I'm looking forward to having an 11x multi to play with. :)
Your bandwidth seems quite high too considering you're running Adata at relatively slack timings, I get about 3500/3500 running OCZ EB at 3-2-2-11 timings, 1T command rate.:confused:
Another question, seeing as the 3400+ CG runs the memory controller at a native 2T, do you have an option in your BIOS to enable 1T, and if so does the CPU handle 1GB RAM running at 1T better than the CO steppings?
And also, is that OC PRIME95 stable? And just to add another annoying question to the list, what's the max FSB you've been able to get with that 3400+ and the Adata, I presume it's the PC4000 Vitesta?
Sorry for all the Q's, I always get excietd the day before a new CPU arrives, and we have a fairly similar rig. :)
I try 256mb on 8kda3+ one and two stick the same! maybe need vdimm mod !Quote:
Originally posted by k|ngp|n
Nice chip! and nice overclock on air too.
These cg clawhammers seem to clock nice and hold temps very well on air.
Some bh-5 @ 5-2-2-2 cmd1 1:1 would add about 400mb/s to your bandwith at that cpu speed with 10 multi.
Here is bh5 compare for you:
http://pic8.picturetrail.com/VOL256/...6/57610403.jpg
You have a good overclock for 3400+ on air! Too bad you cant get your bh-5 to run....whats the problem? Need more vdimm?
Are you trying bh-5 with one stick or two? 256 or 512?. I am very interested in that epox board and you got me wondering if it has issues w/bh-5.
Stepping? Week? Where did you get that nice chip?
http://home.pchome.com.tw/school/qk4722/34001.jpgQuote:
Originally posted by Mariachi
Stepping? Week? Where did you get that nice chip?
very nice! especially the temps! what cooler is that? do you have a pic of it or a link to it?
29°C case and 32°C cpu, thats really nice! even for idle
and a small question :D
what is this? ^^
oh, and WELCOME TO XTREMESYSTEMS
:D :toast: :YIPPIE: :eleph: :YIPPIE: :welcome:
Yeah no :banana: :banana: :banana: :banana: :banana:.. My 3400+ CO on water with the same motherboard is reading around 48-50C in the bios idle.. DOnt make any sense!
on his 1st post there was "HYPER6" ;)
that epox app is terrible. the temps and voltages are so off. if you check the voltages with a meter you will see what i mean. the voltage readouts in the bios are completely off also. most of the time they read higher in bios and when you log on to windows they drop.Quote:
Originally posted by eclypse
Yeah no :banana: :banana: :banana: :banana: :banana:.. My 3400+ CO on water with the same motherboard is reading around 48-50C in the bios idle.. DOnt make any sense!
this board needs some sort of a droop type mod. when load is applied the vcore will jump anywhere from .05 to .1, making the board more stable under load than at idle. it has something to do witht the new nf3 250 chipset and cool and quiet.
Qk do you have vcore droop, thats the one bad thing that I have heard about this board.
no i don't vcore droopQuote:
Originally posted by jfr0
Qk do you have vcore droop, thats the one bad thing that I have heard about this board.
you go and see...
http://www.coolaler.com/ipb/index.php?showtopic=17635
http://www.coolaler.com/ipb/index.php?showtopic=17379
http://www.coolaler.com/ipb/index.php?showtopic=17205
Cant see anything on those pages, perhaps you have to log in or something?
:DQuote:
©êºp¡Aµo¥Í¿ù»~¡I_Õ_Y±z¤£½Tª¾¦p ó¨Ï¥Î¬Y¶µ¥\¯:banana:¡A©ÎªÌ¤£ª¾¹D¬°¦ó±z·|±o¨ì¦¹¿ »~°T®§¡A½Ð¸ÕµÛ¬Ý¬Ý»¡©úÀÉ®× ¥H¨ú±o§ó¦hªº¸ê°T¡C
¶Ç¦^ªº¿ù»~¬°¡G
±z¨S¦³Åv__Æ[¬Ý¸Ó¥DÃD
yeah in another lang.
Damn, 2,65 Gig on air! :slobber:
My 3400+ CO core does 2.53Gig SuperPi stable on air.
Are those CG cores really that much better?
What about this 2T command?
Is there any possibility to disable this? (Codered's A64 tweaker prog?)
Btw, nice OC, both qk4722 and k|ingp|n. :toast:
oh sorry i forgot http://www.coolaler.com/ipb/html/emoticons/14.gifQuote:
Originally posted by saaya
:D
M/B ¡GEPoX 8KDA3+S754(NFORCE3 250)
MEM ¡GG.SKILL TCCD 256mb
VGA ¡GMX
HDD ¡GMaxtor S ATA 6Y060M0 X2 Silicone 3112 RAID 0
POWER: DELTA 350W + CWT 550W
OS ¡GWIN XP PRO SP1
CPU COOLER:water cooler
CPU¡GS754 3700+
VDIMM2.8V
G-SKILL TCCD can run DDR650 8-4-4-3 Timing up at 2.8v
http://coolaler.nil.com.tw/images/gstccd/7.JPG
http://coolaler.nil.com.tw/images/gstccd/14.gif
by Taiwan coolaler
:eek: no way, these are the same chips used in the CorsairPC3200XL sticks, and i've NEVER seen a review that had them even come close to this speed...Quote:
Originally posted by qk4722
oh sorry i forgot http://www.coolaler.com/ipb/html/emoticons/14.gif
M/B ¡GEPoX 8KDA3+S754(NFORCE3 250)
MEM ¡GG.SKILL TCCD 256mb
VGA ¡GMX
HDD ¡GMaxtor S ATA 6Y060M0 X2 Silicone 3112 RAID 0
POWER: DELTA 350W + CWT 550W
OS ¡GWIN XP PRO SP1
CPU COOLER:water cooler
CPU¡GS754 3700+
VDIMM2.8V
G-SKILL TCCD can run DDR650 8-4-4-3 Timing up at 2.8v
http://coolaler.nil.com.tw/images/gstccd/7.JPG
http://coolaler.nil.com.tw/images/gstccd/14.gif
by Taiwan coolaler
holy :banana: :banana: :banana: :banana:, thats with 2.8v???/???
pump a little more volts into those puppies
Quote:
Originally posted by HKPolice
:eek: no way, these are the same chips used in the CorsairPC3200XL sticks, and i've NEVER seen a review that had them even come close to this speed...
ok!!!
CorsairPC3200XL TCCD run DDR520 discontinue at 2.8v
http://www.e04hardware.com/tccd/tccd02.jpg
http://www.e04hardware.com/tccd/tccdddr520.jpg
by ¨g¤Ö
CPU 3.0EE(ES)
M/B IC7-max3
MEM A-DATA TCCD PC4800(ES) 512MB 2.8v
http://61.220.123.253/cpg/albums/use...1/PDRM0036.JPG
http://my.so-net.net.tw/johnnyliu/TC...0512MBx1-2.JPG
by Taiwan johnnyliu3377
wow, where can i buy this ram in the states? or can i?