Printable View
Hello
I,ve had serval problems with defect DFI lp mobos. I,ve had 2 defect boards. Today the store that I,ve RMA,ed my mobo to gave me a sad truth :/. The had testet like 5 mobos and all had undervolted really :banana: :banana: :banana: :banana:ing much :/. So de said that I could get another mobo. I could chose what board I ever wanted, so I chose the ABIT AN7. Have I done a good choise?
Most likely not, but you could get a 'lucky' one thats much better than average and work really well. I haven't heard of many that do very well though. Generally not as good as NF7-S 2.0 which would be comparable to the DFI.
Personaly i would never trade my LPb for an AN7, because iv never had any problem with the LPb except that my first card died when i plugged in the Coax cable :/ i didn't have any trouble with the first card either, except that i died :) before i had a NF7-s 2.0 and that was a really good card too, but the thing i like better with the DFI card is the 3.3v vdimm because i don't want to do vmods and stuff. just want out of the box power :)
AN7 is very high potential board... unfortunately dont have the board to do further tweak on the biosQuote:
Originally posted by µnrealneo²
Looks like the new modded BIOSes give the AN7 some considerable power. ;)
Dont ask for a link to them cos I dont have one.
any way the modded bios we have done is quite good too :D
Spec:
ABIT AN7
250MHz FSB 2-2-2-11 timing Dual Channel
- Memtest ran overnight with no errors
- No Volt mod done
- No L12 Mod done
JUST BIOS MOD ... hehehe
cheers :banana: :banana: :banana: :banana:
DFI LPB should do sky high FSB with some serious bios mod to... we llokingtoward hat board now... :toast:
Now that dosen,t look to bad, tictac. What about the bios you are runnig, where can I find it? The guys told me that if I wasn,t satisfied with the an7 I could sent it back, they also told me that they could voltmodd the card.
everyone thx for the answears.
Evrything about AN7 Overclock bios check ithere:Quote:
Originally posted by korvskall
Now that dosen,t look to bad, tictac. What about the bios you are runnig, where can I find it? The guys told me that if I wasn,t satisfied with the an7 I could sent it back, they also told me that they could voltmodd the card.
everyone thx for the answears.
http://forum.abit-usa.com/showthread...&pagenumber=19
:toast:
Well It,s a big mess over there. I don,t see witch bios I shall choose? Link me the bios that you ran 250 fsb stable Please.
anyone got a link to that an7 bios
friend has this board