Started out With a Single Stage.......

Hey Gang,

Remember When I Built My First Single Stage Phase Change?

Well, I Kinda Went Overboard on My Next...........

Cascade CPU/Single OR Cascade Gpu, Still In Progress.

Whata Ya'll Think?:D

Another Shot..

I Have the CPU Cascade Running and I am Working On the GPU Single/Cascade.;)

That's go to be one of the best looking - homemade cascades I've seen. Very professional.

It must have come out of the "Cascade Factory"

Can't wait to see the next Chapter.:owned:

very nice man... thats the cleanest cascade system i have seen :toast:

Looks very nice, Do you have pictures of you making it?

A few Questions.
Where did you get the cart?
Did you burn the rug in the living room?:D
Is there gonna be room for a GPU cascade there?

And now the good news... INCOMING>>>>> ETA Thur noon to FRI noon....

Quote:

---

Originally posted by someone
Looks very nice, Do you have pictures of you making it?

---

Check out the link in my post ^^^^^ It's two post up. Cascade Factory.

I want a cool cart to! Whered you get it?

Awesome work so far :D

Quote:

---

Originally posted by runmc
Check out the link in my post ^^^^^ It's two post up. Cascade Factory.

---

you have to be registered to view:(
What is cascade factory?

Quote:

---

Originally posted by runmc
That's go to be one of the best looking - homemade cascades I've seen. Very professional.

It must have come out of the "Cascade Factory"

Can't wait to see the next Chapter.:owned:

---

I've Outlined It Since Day One Step By Step In the Team Puss Forums under "Cascade Factory".

You Should NOT have to be a Member To View It, Only to Post!:cool:

Chiily1

Thanks for the Update!:D

Here's a pic of the shelving I used.......

You can Buy it at Wal-Mart.;)

http://www.walmart.com/catalog/produ...A90828%3A90829

BTW: I Didn't Burn Holes in the Rug 'cause I use a Drop Cloth Barrier when Brazing!:p:

And, If You Look Closely on the Left of the Second and Top Shelf of the Third Post Pic, You'll see the Layout for the GPU Cascade(Two additional Compressors!):D

Cool saw that..

Howed you put wheels on it?

Cant wait to see the GPU cascade. When you going to get started on it?

afireinside

I had some caster wheels I bought from Home Depot which I Brazed onto the Shelving Framework Along with Brazing the SHELVES THEMSELVES;) to Support the Weight!

model 9477mw for $3.39 Each/(Internet/cataloge#795590),2" Caster Wheels.

As Far as the GPU Cascade goes, I Have the First Stage Done(Since I Just used my single Stage Phase Change that I had Built Originally) as Shown in my First Post in this Thread.

I have to Build/Purchase the Same Items as in my CPU Cascade(HX,Receiver,accumulator,Expansion tank) except for the Evap assy(Baker Block/Hose/Enclosure) which I had bought from xtwerks.com Previously, and a 1/5 HP Compressor that i will try to use for the Second Stage.:D

haloween if you use the gpu you currently have and cut the condenser off and replace it with an oil seperator and a HX your second will be done then add afirst stage compressor.

Well, Chilly1

The First Stage I Have is All Dismantled(Not Together anymore like in the First Pic in this Thread!), so I May as Well Start over with the 1/2 HP as My First Stage and Build A Second Stage Using a 1/5 HP Comp, Don't You Think?:)

that is so nice hallowen!!!, wat temps are u getting?

Clean looking system m8 :)

ATM, I'm Using R404A in Both Stages, But I will be switching over to R507 on the First stage, and after I remove My Cap tube Evap and Install My Chilly1 PEV Evap on the Second Stage, I'll be using R1150(Ethylene) In It!:slobber:

Right Now, I am Getting These Temps With the R404A In Both Stages.......................(Large Reading is Second Stage Evap, Small Reading is First Stage HX)

ah, nice temps...the R1150 will really lower ur temps, good luck with it...btw, how are u getting it?

I bought a Harris HP721 Regulator(0-500psi) with a CGA-350 Connection(Made for Ethylene Bottles)@$210, and a 22lb bottle of Ethylene@$108, from Weld Direct Corporation.

Next

And

I MUST Caution ANYONE Who is Considering Using This Type Of Extremely Flammable Gas To READ Lardarse's STICKY in this Forum On The DANGERS OF R1150(ETHYLENE).

You MUST Have Knowledge of Single Stage Phase Change and Cascade Systems Before You EVER Attempt To Use This Type Of Gas As A REFRIGERANT!

You May Flame Me For Telling You This , But I'm Just Trying To Keep Someone From Getting Injured Or Worse!

:explode:

I would PERSONALY Take The Advice Of Gary Lloyd,Chilly1, and runmc of the TEAM PUSS Forums on this Subject!