Printable View
:hello:
i'm testing my ddr 500 A-data today, I put multiplier 4 and then i began to increase fsb.. i reach 342 at the moment but latency isn't that good i think.. (52 ns)..
I put 2.9v . no vddr mod at the moment.
my system : shuttle an50r
a64 3200+
2x256 ddr 500 A-data
what multiplier is the best in order to have best performance?
is 340 normal..? i heard that multiplier .5 aren't that good.. i didnt test that much under .5 multiplier..
http://www.multimania.com/undeadz/test1.jpg
its not actually running 340fsb... its a glitch with the 4x and .5 multipliers
ok
how can i reach a high fsb then? with which multiplier?
Since 5 is the lowest ram-divider, your ram is running @ 273Mhz
(342/5) * 4 = 273
To run 1:1 you need to run 5 or above, and no half multis.
ok i'm going to test with multiplier above 5 and no half multis too :D
i'll post screenshots here ;)
thx Formann :)
they have to fix that bug.Bt 273 is still good.
thats average for hynix chips, nice board though it seems, and nice cpu.
bios is last, 26
i hope i'll reach more than 273 tonight :D
finally tested my mem..
http://www.multimania.com/undeadz/test.jpg
Try to test the memory in Sisoftsandra.
it reached something like 295 now under sandra
http://www.multimania.com/undeadz/sandra.jpg
Nice !!
nice... great results.
Nice scores.. And nice sticks. How much voltage are you feeding´em ?
2.9v only
i need to do vddr mod in order to see if they can reach a better frequency :D
300 shud be np with a little more volts:D
tried lowering the timings a little? ..
If you are after performance then lowering the timings would incerase ever so slightly.
would be interesting to know if these chips could run
better timings lets say
230 fsb 1:1 - 2-3-3-6 or 2-3-2-6
ok i'm going to test better timings ;)
i have run 2.5 4 3 5 but its stable only under 255 mhz though.
i tested 3 4 4 5 too. stable around 270,280 but no more.
Nice clocks and buffered :toast:
How is the 'real world speed' at those timings ?
aka unbuffered Sandra mem
im curious about this aswell, especially 2-3-2-6Quote:
Originally posted by thomas66
would be interesting to know if these chips could run
better timings lets say
230 fsb 1:1 - 2-3-3-6 or 2-3-2-6
hynix can run cas2? 300mhz is nice, most hynic sticks crap out at 280
it doesnt even boot with cas 2 :D
macci, where can I find this screen setup in sandra?
i reached 297 on sandra, i try to reach 300 @2.9 but its getting hard :/
is it running hot? ramsinks could give you a nice 5mhz boost.
right click on memory bandwidth benchmark and then click on module options :thumbsup:Quote:
Originally posted by eviLRuLeZ
where can I find this screen setup in sandra?