Project Divine Finished

http://www.nordiccrew.com/crusader/divine1b.jpg
Lian-Li PC75B, plexi shroud.

http://www.nordiccrew.com/crusader/divine10.jpg
Aquacomputer's 3.360 Radiator

http://www.nordiccrew.com/crusader/divine3.jpg
Whitewater CPU, Swiftech MCW20 and MCW50

http://www.nordiccrew.com/crusader/divine4.jpg
Eheim 1250 and DD Bay-Res reservoir. Sleeved cables.

System spec:
Abit IC7-G vdimm mod
Intel P4 2.4C @ 3.5GHz
Radeon 9800PRO vgpu mod
Mushkin High Perf. Black Lvl2 PC3500
Antec TruePower 430W


PM me for more pics.

:cool:

Nice work, looks good, might I suggest at least a few Zip ties to secure the hoses...

May seem as they'll never come off, and they may not, but it is cheap insurance...

nice shroud :D

what kinda temps. and OC are u getting?

that rad. is huge ...u cud upgrade to TEC np later on

Quote:

---

Originally posted by a5h
nice shroud :D

what kinda temps. and OC are u getting?

that rad. is huge ...u cud upgrade to TEC np later on

---

The shroud is home made, perhaps not so very sexy, but it works well. =D

I have a delta of 4-6 degrees between Idle and full load (dual prime). No use of numbers since they differ alot between different mobos.

The 2.4C goes to 3.52GHz, did 3.2 with Zalman CU7k. The board is holdning me back, hitting a FSB wall =/ i hope to get my hands on a nice SL6WU, tried crotale's, it did 3.9GHz with this cooling and 1.65v.

the gpu goes to 480 now, did 438 with stock air, pretty good increase imo.

I have a MCW50-T laying around, might try it on and see what happens to the CPU temp, dont wanna sacrifice to many megahertz for lower temps on the 9800p.

Havn't done any benching yet, waiting for new hdds to do a fresh winxp install on. also trying to find some time to voltmod the mem on the 9800p, the vgpu is done aswell as vmod for ram on mobo. think i need ramsinks for the gfx mems.

peace!

I saw your post at the Watercooled Case Gallery

Nice Rig :cool:

Quote:

---

Nice work, looks good, might I suggest at least a few Zip ties to secure the hoses... May seem as they'll never come off, and they may not, but it is cheap insurance...

---

I second that.

Quote:

---

the gpu goes to 480 now, did 438 with stock air, pretty good increase imo.

---

Mine only does 450/375 ( I say only because I expected more, but It's not a bad O/C) I didn't get a very good core on my AIW 9800P

Quote:

---

think I need ramsinks for the gfx mems.

---

Do you mean 9800P ? If so, then I would definitely agree.

Quote:

---

Haven’t done any benching yet

---

Post them when you do :)

Oh! and where is your CD-Rom?

Quote:

---

Originally posted by REDKEN

Oh! and where is your CD-Rom?

---

:doh: behind those lian-li bezels (two of them look different from the others) offcourse ;) [edit] damn im stupid..... sorry is was wrong there, didnt look inside the cas -->:doh: to me :banana: [\edit]

BTW i've got exactly the same case it rules!! :rocker:

[edit] i already see some zipties btw gpu-nb hose [/edit]

I have zipties on the inlet and outlet on both the pump and radiator. I don't think it's needed on the other connections but I'm constantly checking for waterdrops around all connections, no sign of it yet.

REDKEN, I forgot to mention that I've raised the vgpu to 1.77 (1.7stock), that might be the reason I'm higher than you (or perhaps you also have done vgpu mod?)

The CDROM will be placed above the reservoir, just havn't done that yet. Who needs one anyway?

Quote:

---

REDKEN, I forgot to mention that I've raised the vgpu to 1.77 (1.7stock), that might be the reason I'm higher than you (or perhaps you also have done vgpu mod?)

---

Yep, done that too. Actually I have it at 1.9v (and won't raise it any more) I have done almost everything except Bios flash my card but there aren't any "optimized" Bios for the AIW's so I'm stuck at were I am, but that’s OK.:)

Very nice rig there nCrusader, I was just wondering if your Rad came with 1/2" connectors because all of the EVO series Rads i've seen only have 1/4" inputs??? or so you have 1/2" to 1/4" converters on there??

thanks

very nice!

Quote:

---

Originally posted by synth
Very nice rig there nCrusader, I was just wondering if your Rad came with 1/2" connectors because all of the EVO series Rads i've seen only have 1/4" inputs??? or so you have 1/2" to 1/4" converters on there??

thanks

---

i dont think its an EVO rad. but i might be wrong.

ncrusader - youre rig looks very awesome! congrats :toast:

ive got a question, whered you get the vent on top? i really liek it :D

Quote:

---

Originally posted by synth
Very nice rig there nCrusader, I was just wondering if your Rad came with 1/2" connectors because all of the EVO series Rads i've seen only have 1/4" inputs??? or so you have 1/2" to 1/4" converters on there??

thanks

---

No, it didn't came with 1/2" connectors, I bought them separate. You can get 3/8" connections when you order

Quote:

---

Originally posted by a5h
i dont think its an EVO rad. but i might be wrong.

---

Actually it is a Evo Radiator.

Quote:

---

Originally posted by ocmyface
ncrusader - youre rig looks very awesome! congrats :toast:

ive got a question, whered you get the vent on top? i really liek it :D

---

Aquacomputer have them for sale, pretty expensive (€22) but it's worth it:

http://www.nordiccrew.com/crusader/divine2.jpg

A better picture of my own designed sleeved cables:
http://www.nordiccrew.com/crusader/divine6.jpg

And an ever better one (before the WC was installed)

very nice case! too bad you only hit 3.5ghz :(

Nice case, looks great.

Quote:

---

Originally posted by saaya
very nice case! too bad you only hit 3.5ghz :(

---

That's prime stability speed.

I can run SuperPi @ 303FSB (3636MHz)

Quote:

---

Originally posted by nCrusader
A better picture of my own designed sleeved cables:

---

:confused: own designed??? i've got exactly the same stuff, whut did you mean??? And the ATX cable comes this way with the power supply innit?

Quote:

---

Originally posted by h0ok3r
:confused: own designed??? i've got exactly the same stuff, whut did you mean??? And the ATX cable comes this way with the power supply innit?

---

I'm not saying that I was the first and only person in hole world who have sleeved the cables this way. What i mean is that I came up with the idea myslelf, not by seeing anyone else sleeve the cables the same way I've done it.
Yes, the ATX cable is not modded.

Please show us some pictures of yours!

i've got no digicam, sorry........ but it is like this, only way neater cos this is just rolled up, it makes no sense(the guy who made this just shot a quick pic i guess). I have got all the excess wire behind my mobo backplate, and with my harddisk 'n stuff(not visible anyway:) ).This stuff is hard to get in Holland btw....

(this i stole from a review:banana: )
http://www.casejunkies.com/images/ar...cture_1338.jpg

(it's called nylon sleeving, yours 2?)

That's one nice looking shroud... does anyone know where I can buy them in the US? arrrg I want it! and your case ;)

ri3eboi, It's a homemade shroud.

Nice case but still I would get some hoseclips or zip ties on there....

or worm drive clamps.
nice setup nCrusader. so intel mobos do actually benefit from water, cause there running at a higher fsb generally?

Looks good, I love clearflex 60