JP[0] by JaPeMo (Acrylic Pc Case)

http://i58.tinypic.com/rlb2nm.jpg

Sponsors

http://i61.tinypic.com/11ii9ug.jpg

http://i59.tinypic.com/2jd0s4y.jpg

http://i60.tinypic.com/2ipzd2.jpg

http://i61.tinypic.com/2005tu8.jpg

My first mod started for 3 years ago, I've picked up this habit.

I am currently working in Paris (late September), but I'm already working on my new project, JP[0]
Still under study and sketching. All drawings and doodles on paper, even napkins taking cafes, which is where the best ideas are translated ...

Hardware

Motherboard: Asus Rampage IV Black Edition http://i62.tinypic.com/16gmjv6.jpg
Micro: Intel i7-3930K http://i62.tinypic.com/16gmjv6.jpg
RAM: 16GB Team Xtreem DDR3 PC3-20800 2600MHz (10-12-12-31) Quad Channel kit 4x4GB http://i62.tinypic.com/16gmjv6.jpg
GPU (VGA): EVGA GTX 670 FTW 2Gb SLI http://i62.tinypic.com/16gmjv6.jpg
Case: Full personal construction in acrylic
Hot Swap: Icy Dock MB973SP-2B http://i62.tinypic.com/16gmjv6.jpg
Power Supply: Seasonic X1250W (SS-1250XM) http://i62.tinypic.com/16gmjv6.jpg
Sound Card: Asus Xonar Essence STX http://i62.tinypic.com/16gmjv6.jpg
Active monitors: KRK Rokit 5 G2 (x2) http://i62.tinypic.com/16gmjv6.jpg

Liquid and Air cooling

Pumps: Swiftech MPC-355 (x2) http://i62.tinypic.com/16gmjv6.jpg
Top: Aquacomputer aquacover dual DDC http://i62.tinypic.com/16gmjv6.jpg
Reservoir: EK Multioption RES X2-250 Advanced http://i62.tinypic.com/16gmjv6.jpg
Block PB & CPU: EK-FB ASUS R4BE Monoblock - Acetal+Nickel http://i62.tinypic.com/16gmjv6.jpg
Block GPU: EK-FC680 GTX+ - Acetal (x2) http://i62.tinypic.com/16gmjv6.jpg + EK-FC Bridge SINGLE CSQ
Tube: Acrylico 16/12 Clear
Liquido: Mayhems X1 - Oil Black 1ltr liquid cooling
Fittings, adapters and accesories:
EK Water Blocks
EEK-HDC Fitting 16mm G1/4 - Black (x22)
EK-PSC Adapter 90? G1/4 Black (x12)
Koolance
Fitting Coupling Adapter, *Black* Male-Female, 20mm (x4) http://i62.tinypic.com/16gmjv6.jpg
Fitting Coupling Adapter, *Black* Male-Male (x4) http://i62.tinypic.com/16gmjv6.jpg
Fitting Coupling Adapter, Swiveling Male-Male (x1) http://i62.tinypic.com/16gmjv6.jpg
Check valve (x1) http://i62.tinypic.com/16gmjv6.jpg
Bitspower
Bitspower Flow Sensor Matt Black (x1) http://i62.tinypic.com/16gmjv6.jpg
G1/4 Matt Black CaseTop Water-Fill SET (x7) http://i62.tinypic.com/16gmjv6.jpg
G1/4 Matt Black IG1/4 Extender (x4) http://i62.tinypic.com/16gmjv6.jpg
G1/4 Matt Black Mini Dual G1/4 Extender (x10) http://i62.tinypic.com/16gmjv6.jpg
Bitspower G1/4 Matt Black IG1/4 Extender 15mm (x1) http://i62.tinypic.com/16gmjv6.jpg
Bitspower G1/4 Matt Black IG1/4 Extender 25mm BP-MBWP-C62 (x1) http://i62.tinypic.com/16gmjv6.jpg
Matt Black Mini Valve With Black Handle (x3) http://i62.tinypic.com/16gmjv6.jpg
Others
Filter(x1) http://i62.tinypic.com/16gmjv6.jpg
Te (x1) http://i62.tinypic.com/16gmjv6.jpg
Controller:
Aquaero 5 Pro w/ water block + Flow sensor "high flow" G1/4 for aquaero + RGB Module http://i62.tinypic.com/16gmjv6.jpg
PowerAdjust2 USB Ultra (x2) http://i62.tinypic.com/16gmjv6.jpg
Temperature sensors:
Ambient (x1) http://i62.tinypic.com/16gmjv6.jpg
Inside case (x2) http://i62.tinypic.com/16gmjv6.jpg
Radiator air out (x1) http://i62.tinypic.com/16gmjv6.jpg
In-line in/out radiators (x4)
Radiators: Alphacool NexXxoS UT60 Full Copper 360mm (x2)
Fans:
Noiseblocker NB-BlackSilent Pro 120mm PL-2 1400r.p.m. (x8) http://i62.tinypic.com/16gmjv6.jpg
Noiseblocker NB-BlackSilent Pro 80mm P-1 1500r.p.m. (x5) http://i62.tinypic.com/16gmjv6.jpg
Others: Recycled http://i62.tinypic.com/16gmjv6.jpg

Lighting

5050 RGB LED Strips and UV http://i62.tinypic.com/16gmjv6.jpg

Documents & Galery

Acces to documents and galery about worklog
Link to Google Drive

Updates

1. Presentation [15/08/14]
2. Components in Sketchup [21/08/14]
3. Frame for photos [22/08/14]
4. Reservoir renders [23/08/14]
5. SAS/SATA Backplane, I chose... [24/08/14]
6. Pics of 3D Pc Case [05/09/14]
7. New Sponsor [08/09/14]
8. First package... [08/09/14]
9. Pieces & Renders... [14-09-14]
10. New Sponsor... [16-09-14]
11. Order from Highflow.nl [03-10-14]

Reserved for final photos...

http://i61.tinypic.com/2lidkzc.jpg

http://i58.tinypic.com/dw6ozm.jpg

Video: JP[0] - Sketchup Componentes - 001

http://i59.tinypic.com/jg6qgn.jpg

I take ideas from FrozenQ and I apply

http://i60.tinypic.com/sym5ae.jpg

After playing with mouse...

http://i59.tinypic.com/28qqe85.jpg

http://i57.tinypic.com/2jba078.jpg

http://i57.tinypic.com/ws0aqt.jpg

Hi!!!

I like 2 models SAS/SATA Backplanes. Raidsonic IB-543SSK (ICY BOX) by leds, grill and full black body. But I chosen the ICY DOCK MB973SP-2B by USBs (so I avoid having to put one and cut case) and secondly because I do not need key to open. The pc will be home and will be use by me.

Other models:

- StarTech HSB3SATSASBA
- Kingwin KF-0331-BK
- iStartUSA BPN-DE230SS-BLACK
- Orico 6203SS

Specifications of ICY DOCK MB973SP-2B

ICY DOCK FlexCage MB973SP-2B Tray-less 3 x 3.5" HDD in 2 x 5.25" Bay SATA Cage - Front USB 3.0 Hub
Model Number : MB973SP-2B
Color : Black
Drive Fit : 3.5? SATA 1.5 / 3 / 6 Gbit/s hard drive x 3
Drive Bay : 5.25" half height device bay x 2
Host Interface : 7 pin SATA port x 3
Power Input : 4 pin power port x 2 or 15 pin power port x 2 (w/ included 4 to 15 pin adapter cables)
Transfer Rate : Up to 6Gb/sec. (depending on hard drive speed)
Insert & Extract connection via : Direct SATA hard drive connection
Front Panel Contents : LED power button (Indicator) x 3 USB 3.0 Hub (2 Ports) Adjustable fan speed control (High/Low/Auto)
Structure : Aluminum body w/ partial plastic
Drive Cooling : Removable rear outtake fan w/ aluminum heat dispersion
Cooling Fan Type : 80mm ball bearing fan with 2 or 3 pin connector
Power Indicator : Blue LED
HDD Access Indicator : Flashing blue LED
Dimension (L x W x H) : 8.27? x 5.75? x 3.35?
Weight : 1.99 lbs

Photos

http://www.icydock.com/images/201212...3331364245.jpg

http://www.icydock.com/images/201212...3886046041.jpg

http://www.icydock.com/images/201212...1170390293.jpg

http://www.icydock.com/images/201301...7746823327.jpg

Good night. Finally finished shape the box.

Everything you see in the pictures is methacrylate, any components or screws. It has taken time to design without resorting to metal profiles for joint panel.

The holes you see inside is because it is smoked gray acrylic. The lines you see on grills are for out grills and clean Decimflex mesh incorporated.

Top & low

http://i57.tinypic.com/iw0utz.jpg

Front & back

http://i57.tinypic.com/2vi2gw6.jpg

Sides

http://i59.tinypic.com/5fkhhx.jpg

Isometrics

http://i57.tinypic.com/33w4jtk.jpg

http://i58.tinypic.com/24cdzb6.jpg

Regards!!!

Hi

I come with a great news....

http://i60.tinypic.com/2ipzd2.jpg

Yes Sires, Noiseblocker up to this travel, Thanks!!!

Regards!!!

More udates!!!

First package..


Icy Dock MB973SP-2B

The specifitacion are above. So, go to comments...
Comment that I was pleasantly surprised its weight, it is very very very light due to its aluminum body totally.
The quality and finish of all I liked it. Worth paying what it's worth.

http://i62.tinypic.com/aceb82.jpg

http://i57.tinypic.com/2hplhcg.jpg

http://i57.tinypic.com/15pr6g3.jpg

http://i57.tinypic.com/15g2sy0.jpg

http://i57.tinypic.com/2mwgolj.jpg

http://i58.tinypic.com/2wr2p2o.jpg

http://i60.tinypic.com/2dmh5rs.jpg

http://i58.tinypic.com/2vtupmp.jpg

http://i60.tinypic.com/244dw5j.jpg

Regards

Hi

Here (Google Drive) you have the foreground of the box. Count of materials and parts separately. Excludes RL, it's just the box with screws.

And finally, the renders. I'm not professional and they are my first render ever. So do not criticize me a lot. If you see white spots, called "fireflies", is a problem and render noise from Indigo, is not it the coated methacrylate.

http://i58.tinypic.com/20zwxly.jpg

http://i57.tinypic.com/14oc49j.jpg

http://i62.tinypic.com/a340m.jpg

http://i61.tinypic.com/359k7zt.jpg

As you see in the picture below, all grids (including those above) will have filters Decimfilter stuck inside and will be able to get clean.

http://i60.tinypic.com/vxnqkk.jpg

Below you will see out that I have adapted the system used Lianli in some of their boxes, leaving the PCIs cards directly aligned with the wall of the box. This is an exterior view and fixing system of PCIs. will be able to get clean.

http://i59.tinypic.com/2nvfkgg.jpg

Pump and drain system

http://i57.tinypic.com/209iv6w.jpg

The tank with the trim. The deposit is transparent but has been inadvertently icing. FrozenQ also has deposits and are very handsome. It is a possibility that I wont. Sand the tank and tube to give a glazed appearance.

http://i61.tinypic.com/feperl.jpg

http://i60.tinypic.com/mhenpi.jpg

http://i62.tinypic.com/2j4r50y.jpg

Inside front window

http://i61.tinypic.com/14kffxv.jpg

http://i57.tinypic.com/jz9ooo.jpg

The latest images are noticed more poor quality (no more than 15 minutes pulling the render), but it is very late and go to sleep.

Regards !!!

Good news, I have new and very good sponsor....

http://i61.tinypic.com/2005tu8.jpg

A lot of thanks to this group, quality and good persons!!!!

Updates. Components and fans from Noiseblocker

http://i61.tinypic.com/2qalpjl.jpg

http://i59.tinypic.com/vyqznr.jpg

Hi!!!

Updates from...

http://i61.tinypic.com/2005tu8.jpg

Thanks to
http://i62.tinypic.com/t6p6kl.jpg

Rads Supports from XSPC

http://i57.tinypic.com/rqxde0.jpg

10 adapters male-male

http://i60.tinypic.com/35b6rye.jpg

3 valves
http://i61.tinypic.com/2m4zjfl.jpg

7 fillports

http://i61.tinypic.com/25ugmpt.jpg

Adapters

http://i58.tinypic.com/mvp6p2.jpg

Filling funnel

http://i58.tinypic.com/vwydqw.jpg

Tube border grinding

http://i57.tinypic.com/e5rcdd.jpg

New flow sensor/indicator. With rear 3 pin connector 3 pines. For Aquaero/Aquasuite you need set to 86 imp/l. Confirmed by Bitspower shopservice.

http://i62.tinypic.com/fb9aw3.jpg

http://i59.tinypic.com/hs7yb7.jpg

Splitters 5 fans / 3 pins...

http://i58.tinypic.com/wapugk.jpg



I'm very surprised from great quality of Bitspower accesories...

Regards!!!