AMD Athlon 5350 Kabini OC test (WoW-SuperPI numbers!!)

Stock

http://s27.postimg.org/vhutx5un7/cpuz.jpg

http://s28.postimg.org/ycgzz5qfh/Namnl_s.png


http://s17.postimg.org/an7lz0txr/Namnl_s.png

http://s27.postimg.org/vn36kkrc3/444444.png


Board

http://s28.postimg.org/k5s2cg0st/asu...X_426777_3.jpg

Like the old days! Just play with fsb and volt!



http://s11.postimg.org/4d0j4ze3n/cpu.png


http://s11.postimg.org/41j2s7xnn/Namnl_s.png


http://s29.postimg.org/es6gs1hcn/image.png

120 FSB


http://s28.postimg.org/yburj3wkt/cpuz.png


http://s28.postimg.org/8ucczieul/image.png


http://s28.postimg.org/gxajatzfx/image.png

Ran into a fsb wall at 124, had to raise volt and lower memory.

http://s10.postimg.org/61z1z8xl5/cpuz.png


http://s10.postimg.org/638zsnzex/image.png


http://s10.postimg.org/7fm3gt7gp/image.png

reserved 3

reserved 4

Nice. How far can you get?

I've read someone at AT forums mention something along the lines of 2.7 ghz with +0.2v, which took power consumption from around 20-25w to 65w... still negligible and these should be plenty fast at those clocks. Probably pushing it considering it's 28nm silicon at those volts... but what the hell! These are cheap! :D

2.5 ghz at 1.3v seems to be a nice middle spot.

Working on it... :) yes 0.2v is a lot for these. I just gave mine +0.01v to get past a fsb wall at 124 Mhz. gonna push it a little more now..

Cant get past 125-130 gave it +0.05v no luck. Can boot at 2666 MHz but cant get into windows. Think I must tweak the northbridge a little to go any further. Guess its harder to OC these since they have the GPU in the same chip.

A 25% OC is all there is this evening. Will have a second look into it tomorrow!

Quote:

---

Originally Posted by fng77

Working on it... :) yes 0.2v is a lot for these. I just gave mine +0.01v to get past a fsb wall at 124 Mhz. gonna push it a little more now..

---

So how much it does on stock voltage ? 2460 ?
Thanks for the tests!

Thanks for the testing fng77!

I probably missed it somewhere, but what mobo are you using that lets you adjust the HTRef clock?
I recently built a NAS rig with an ASRock AM1 mobo, and although I didn't even try to OC it, I didn't see any kind of OC'ing features in the bios...
In fact I didn't even see any tweaks for the bus clock!

Dave

At 2.5 GHz, it's only 2 seconds slower in the 1M compared to my FX-6300 at 4.1GHz!

Quote:

---

Originally Posted by Daveburt714

Thanks for the testing fng77!

I probably missed it somewhere, but what mobo are you using that lets you adjust the HTRef clock?
I recently built a NAS rig with an ASRock AM1 mobo, and although I didn't even try to OC it, I didn't see any kind of OC'ing features in the bios...
In fact I didn't even see any tweaks for the bus clock!

Dave

---

The only mobos so far that are known to allow OCing like this are the asus ones. The OP stated having one of these in another thread. Others (msi IIRC) can do a paltry 4-5 mhz OC on the bclk before getting unstable, similar to what happens on sandy/ivy/haswell

Quote:

---

Originally Posted by [XC] Lead Head

At 2.5 GHz, it's only 2 seconds slower in the 1M compared to my FX-6300 at 4.1GHz!

---

Damn. So these little cores aren't called jaguar for nothing :D

Quote:

---

Originally Posted by Daveburt714

Thanks for the testing fng77!

I probably missed it somewhere, but what mobo are you using that lets you adjust the HTRef clock?
I recently built a NAS rig with an ASRock AM1 mobo, and although I didn't even try to OC it, I didn't see any kind of OC'ing features in the bios...
In fact I didn't even see any tweaks for the bus clock!

Dave

---

Im using Asus AM1I-A, has a lot of bios OC tweaks

Quote:

---

Originally Posted by vario

So how much it does on stock voltage ? 2460 ?
Thanks for the tests!

---

Yes, thats right.

Quote:

---

Originally Posted by [XC] Lead Head

At 2.5 GHz, it's only 2 seconds slower in the 1M compared to my FX-6300 at 4.1GHz!

---

Wow! Thats fun to hear! These chips are so damn small :) They run very, very cool too. The minimal heatsink is barley warm under load. Should be very fun to really push it, with a bigger heatsink, and high volt :)

Quote:

---

Originally Posted by [XC] Lead Head

At 2.5 GHz, it's only 2 seconds slower in the 1M compared to my FX-6300 at 4.1GHz!

---

I will try to get your FX-6300 tonight :p:

Quote:

---

Originally Posted by Dr. Vodka

The only mobos so far that are known to allow OCing like this are the asus ones. The OP stated having one of these in another thread. Others (msi IIRC) can do a paltry 4-5 mhz OC on the bclk before getting unstable, similar to what happens on sandy/ivy/haswell



Damn. So these little cores aren't called jaguar for nothing :D

---

You are right about that sir :yepp:

I just love these Strecom chassis, so slim in everyway, not much space left but the thing is, the cpu is cold anyway, even under load.. But i guess I can get it colder for some more more OC testing.


http://s12.postimg.org/z59oc5g0t/201...4_11_15_32.jpg


http://s12.postimg.org/5ou29q9nh/201...4_11_15_23.jpg


http://s12.postimg.org/f7z5pg7rx/201...4_11_15_08.jpg

I even had to swith the original fan to a smaller one.

wow, nice, seems much fun for OC :)

Quote:

---

Originally Posted by FlanK3r

wow, nice, seems much fun for OC :)

---

Yeah!

You got your up to 2 GHz! Did you ran in to a fsbwall at 125 too?

Quote:

---

Originally Posted by Daveburt714

Thanks for the testing fng77!

I probably missed it somewhere, but what mobo are you using that lets you adjust the HTRef clock?
I recently built a NAS rig with an ASRock AM1 mobo, and although I didn't even try to OC it, I didn't see any kind of OC'ing features in the bios...
In fact I didn't even see any tweaks for the bus clock!

Dave

---

Here is the Asus Bios:

http://s22.postimg.org/wmo5xjvgx/201...4_11_42_51.jpg


http://s22.postimg.org/y0b7f45ch/201...4_11_43_42.jpg


Got some tweaks.

Ok Guys day two!

Couldnt get past the wall at 125! Tried to lower memory ratio no luck... Tried to lower multiplier no luck.. Jolted it with 0.05+ volt, 0.07+ no luck..

Got mad and wet to the wardrobe got a real fan and set that up. Cranked up the volt to 0.1+ Success! Got past the 125 wall, now I?m at 130, but with lower multi. Temps are not bad, around 37-40 idle.

up at 133 now with a x19 multi

http://s24.postimg.org/4v9saraid/Namnl_s.png