Printable View
Hi guys!
Now choose a memory to participate in the MOA Class "B".
May suggest that the take of the following:
G.SKILL F3-17000CL9D-4GBXL
G.SKILL F3-16000CL9D-4GBRH
G.SKILL F3-12800Cl6D-4GbPI
G.SKILL F3-12800CL8D-4GBRM
G.SKILL F3-16000CL9D-4GBRM
G.Skill F3-12800CL9D-4GBXL
Patriot PGV34G2000ELK
Will there be anything better than my Samsung 2666 10-12-12-24?
In short:
No
Only if you find a very good kit and cool it with LN2
Only if you find a very good kit and cool it with LN2
No
Only if you find a very good kit and cool it with LN2
No
No
In my opinion your 2666 CL10 kit is better than all of those options.
Don_Dan, thanks a lot:) . Can you advise what should look for?
Neyasit, those corsair platinums are very good. For spi32m you can easy bench 1333 9-12-12 at around 1.8 vDIMM, and more if you are willing to go nuts with volt. 2x2 psc and bbse is really only good if you have bad IMC/mobo/bios and can't run 1300+. Also with haswell 1400+ ram will rock.
Calathea, If I had these Сorsairs:D, it would be cool, but I have exactly the most common Samsung DH0 for about 20$ per kit;)
there is another one kit i wach:
KHX2133C9AD3X2K2/4GX It seems to be Elpida BDBG-DJ-F there. It's good or not?
Quote:
Originally Posted by Neyasit
I thought you had a Dom Plat or TridentX 2666CL10 kit as well. You mean you clocked some OEM Samsung sticks to 2666CL10, right?Quote:
Originally Posted by Neyasit
In my opinion a good Samsung kit ( 2400CL9 or 2666CL10 ) would be the best choice for you. As Calathea said you can run 2666CL9 or 2800CL10 with them which should be good enough for 32M.
Elpida BDBG will be comparable to similarly spec'd PSC Xxx ICs, but slightly ( or a lot ) worse, I don't think those sticks would be a good choice for MOA, especially keeping in mind the benchmarks you have to run. Of course you can try them if you can get them for cheap! ;)Quote:
Originally Posted by Neyasit
For MOA spi32M I would recommend bbse, even mediocre stuff that does 1200 8-10-7 @ 1.8 volt is fast on Mpower - faster than 1350 9-12-12 because of borken dividers... just like Splave I have not had any luck at all with divider higher than 2400, it's just super slow.
edit: I realise this is quite the opposite of what I wrote earlier, but for MSI mobo I can not recommend samsung.
Didn't know about the MPower's problems with higher dividers, BBSE that can do 1200 CL8 should be easy to find though.