Mobile 2400+ rocks!!

After having three CPU's that couldn't get past 2.2-2.3ghz(2-1700+ and a 2500+) I picked up a Mobile 2400+ for newegg and here is what I have:

AXMH2400+FQQ4C
AQZFA0344SPMW
Brown with light purple core


OK, heres some numbers so far. The temps are idle/load, load was for 10min under Toast so I don't know if there rock stable yet. Voltage is what windows shows in Hardware Doc(.05 less than BIOS)

11.0x200mhz= 2.2ghz @ 1.55v 28.0c/34.0c
11.5x200mhz= 2.3ghz @ 1.60v 31.0c/36.0c
12.0x200mhz= 2.4ghz @ 1.70v 35.0c/39.0c
12.5x200mhz= 2.5ghz @ 1.79v 39.0c/42.5c
13.0x200mhz= 2.6ghz @ 1.97v 45.5c/53.5c
13.5x200mhz= 2.7ghz @ 2.23v reboot on Win splash screen

SiSandra @ 2.6ghz
CPU Arithmetic- 9853/4082
CPU MultiMedia- 23789/24438

Right now I'm surfing at 2.6ghz but its why to hot to run 24/7.So I'd say 2.5ghz is max I'll get on air, and 2.6ghz on water. I think it would do 2.7ghz with phase-coolingI 'll be buying a Prometia cooler later this year hopefully it'll let me push this chip to 2.8ghz:D Off to find max FSB.

Well FSB maxed out at 233mhz (boards limit) so I guess I'll have to wait for the Prommie. Ran stable a 11x233mhz 1.95v(2.57ghz) but just way to hot for air. Will keep it at 11x225mhz 1.85v(2.48ghz) for now. Topped out at 50.5c after 1/2hr of Toast.

i want one!!!! how much? how much?

about $80 on newegg.com

want one Saaya? i'll get ya one (you gotta pay though :p: ) ;)

YES! please buy one for me! please!

mines not nearly that good.. :(

2400mhz @ 1.8v, not bad though.

better than the crappy 2500+ i got here, wont even run stable at 2.3 no matter what volts! :mad:

stang ygpm :D

I got one of those that I'm running in an old EPOX 8RDA+ and it'll do 2300 with 1.825 v (MBM says 1.87 v). I've been a little hesitant to push the voltage up too much though since the default is 1.45 or something like that. I have pretty good air cooling on it, a Dr. Thermal Extreme with a Delta screamer on it. It runs under 40C under load so I guess I could pump more into it.

they can take the same volts as normal bartons, if your cooling can handle it you can push it up to 2.5v ;) seen that on asian forums. some people have been running their chips at 2.5v for months without a problem at all... you just have to keep them cool.

i really wonder why intels cpus crap out at high voltages while amds cpus can take huge volt loads. i havent seen a single axp that was killed by too much voltage...

i heard of someone running 2.7 with some good water cooling.. thats just nuts.

I've heard 2.1V can kill after a few months.... But 2.5V? Where can I get a Vcore mod for the Infinity :p: **orders 2400+ mobile**

saaya, you got Pm back :)

OCMatrix, what cooling are you using?

i got a Thermalright SP-97, so hopefully you're using maybe a stock cooler :p:

Quote:

---

Originally posted by afireinside
I've heard 2.1V can kill after a few months.... But 2.5V? Where can I get a Vcore mod for the Infinity :p: **orders 2400+ mobile**

---

been running 2.1v on my xp1700+@2.3ghz for months... ON AIR! ;)

cpu temps were around 55°C and a couple of times my cpu shut down because i set the overheat protection to 65°C in bios, but the cpu is still running at 2.3ghz just fine... only need 1.9v on my new system, a result of the more stable vcore because of the HQ mosfets of the a7n8x and the modded more stable fortron psu.

Just ordered 2 from newegg to try out. Tired of the locked chips lately!!!

oh yeah... even if they can be unlocked by the L5 bridges... its not the same :(

now im stuck with this duron that does 2.4ghz+ on crappy air but cant enable the extra cache... :\

Does the mobile chip has the same performance as the bartons?.....

its a 2500+ downclocked to ~1.8ghz and 133fsb and runs with only 1.45v

Nice work there! My mobile 2500 is doing 12x200 @ 1.75v, prime95 and 3dstable. Temp are about 31~33C prime load. Mine will post at 2.8ghz, but I can't get into windows. I was actually prime stable at 2.6ghz, but took like 1.9v ish, more then I wanna run into a chip that has a stock of 1.45...At least right now anyway. :) I guess I didn't try lower then 1.9v @ 2.6ghz though...Just what I ramped it up to when I tested it...

:D ordered mine lastnight. it was going in my family everyday rig but not after reading this thread.:banana: cant wait to see her@ -45c.

wtf? what are you all so scred of? lol show me a single thread of a guy whose xp died because of too much vcore!

i know people who are running their xps at 2.5v+ for months and some for years! cant believe you have such amazing cpus but dont have the b4lls to make use of their potential :rolleyes:

High volts dont hurt the XP's if your coolings upto it ;)

2.4 GHz @1.75v (Surfing) and 2.5 GHz @1.95v (Gaming) here 24/7 :D

Quote:

---

Originally posted by saaya
wtf? what are you all so scred of? lol show me a single thread of a guy whose xp died because of too much vcore!

i know people who are running their xps at 2.5v+ for months and some for years! cant believe you have such amazing cpus but dont have the b4lls to make use of their potential :rolleyes:

---

I agree! I have an early step 2500+ that i fed 2v on air & 2.2v chilled and i would've gone higher but thats all my 8RGA had to give. Now it's sitting in my everyday rig @1.85v on air. I've also had alot of 1700+'s that i've done the same to. I tried to kill them
but it never happened. So come on CRANK IT UP!:stick: :D

Do you guys think I should get one to replace my 2500+ mobile? My 2500+ doesn't like any volts higher than 1.8 :(

Mines at 2507@1.9vcore, I'm running SETI and temp is 40C. I had it up to 1.925 but the temperature goes up quite a bit and I don't want to turn up my Tornado, it's not worth the extra noise to me.


Raybo