I DON'T KNOW HOW MANY F BOMBS I DROPPED!!!
I've updated my Asus P8P67 to the latest bios 2303 that supported Ivy Bridge 2 revisions ago.
The bios or the chip will not let me go over 34x multi (16-34), effectively 36x with turbo.
This is the retail E1 tray stepping.
WTF?!? :shakes::shrug::shakes:
http://i246.photobucket.com/albums/g...hang69/dud.jpg
did you disable turbo? IDk i clocked fine(much better than most) with a 3770K E1, so the final retail stepping is E1? BTw there is no such thing as a locked K sku.
i disabled turbo, C1E, eist, C3/C6 but that was on a gigabyte z77 board. I willt ry my Z68 boards see if i have teh same issue.
yeah stuck at 34x!
p67? wait 4 bios
BIOS WAS UPGRADED TO iVY bRIDGE 2 REVISIONS AGO...
Try earlier version... maybe this one is bugged...
bios 2103 still stuck at 34x too...
There is known issues.
I changed thread title so Gary will see it, I will also forward to his email.
CPUs not officially on sale. 3*** build will offer full support. Earlier build had full support of the stepping that was out at the time it was released.
Thanks.
Just FYI 2103 is unstable.
2303 runs Prime95 fine (albeit at stock).
Not sure if this will work on your mobo but, here is the 3202 BIOS for MIVE. http://www.mediafire.com/?8hx8f2k332dlpf3
Actually I have a MIVE Gene-Z on the shelf next to a Vertex 3.
Just a pain doing a new build but might have to be the case...
That download also contains the 3202 BIOS for the MIVE Gene-Z.
It is the bios.
Another purchaser from the same guy has no problems on Z77.
Get a Z77 and start torture it:D
P67 3*** updates are in validation phase at present. When the builds are ready we will post them up.
i5-3570k : not bad but a little disappointed...
My retail E1 chip is like the Tweaktown 3570k - no dice above 4.6ghz - up to 1.36v and still not stable at 4.7ghz.
However, the sweet spot seems a decent 4.6ghz at 1.3v, load temps low 80's.
So far, not bad but a little disappointed.
Not a bad chip at all but doesn't clock as high as my 4.8ghz 2500k and 2600k AND runs at higher temps.
Still Prime95'ing...
http://i246.photobucket.com/albums/g...etterPrime.png
Do you really need 1.3 for just 4.6 ?
It doesn't seem like a 22nm processQuote:
Originally Posted by Leeghoofd
Yeah for prime95, yes.
It seems to correlate to the 2500k distribution - the vast majority of midrange 2500k's that hit a ceiling at 4.6ghz.
Just that the heat is substantially more for the extra 4-10% performance boost over a 2500k...
Tese Ivy seems to "burn" alot with over 1.3v, trigate ist all that good for now ( stepping e1 )
Ok Asus bios 3207 for P8P67 fully unlocks the multi for Ivy bridge now:
Ok guys some old school vintage P67 action!
3770k L206B314 P95 x64 stability testing on an Asus P8P67 Vanilla Bios 3207, air-cooled on a Venomous-X with 2x Enermax Magma 120mm fans:
4.7ghz @ 1.328v: ouch, kinda getting a little too toasty so stopped after 30min:
http://i246.photobucket.com/albums/g...0kp6747ghz.jpg
http://i246.photobucket.com/albums/g...0kp6747ghz.jpg
4.6ghz @ 1.276v after 1 hr: idles at .96v and 1600mhz - not too hot and not too slow - this is going to be my Goldilocks setting :)
http://i246.photobucket.com/albums/g...0kp6746ghz.jpg
http://i246.photobucket.com/albums/g...0kp6746ghz.jpg