Sticky change up and round up!

I brought up the idea to Gray Mole (the man with the plan!) of redoing some guides. Alot is now out of date, doesn't exist, is failed to find, or old links are just broken.
This place needs an overhaul!

So, beginning of April I'm back in my shop and planning to do some serious video guides. All the basics. All the not so basics. Even the oh-my-god-what-is-he-doing's!
What do we need?

We compiled a little list so far.


Brazing
Tools
Evac
Pressure test
What parts do
System overview
Refrigerants
Charging
Tuning
Capillary tubes (definitly needs an entire video!)
Where to buy, how to buy, what to get, etc
Conceptual discussion
Evaporator stuffs (brazing, cleaning, lapping, using, making, designing, etc)

That's just off the top of my head, so help add to the list everyone. What do we need? It's time this section has one or two master stickys instead of 7+ don't you think?

Yup. Should have my head examined :p: but I'm in :)

I'm in the middle of too much stuff to start now, but a week or so and I'll feel a bit more settled to doing this.

I thought about doing some of the building (since I'm making a couple for people) and doing the vid's on some of them but I think a lot of it is really better to just have throwaway stuff so I can show 'rightway/wrongway' stuff, and not care if it's going to be wasted or not.

Worst part (other than being fugly) is the clean workspace/pro looking vids etc. If it's for XS then it should look the part I think.

So I'll start something in the next week. I've been finishing up stuff, starting other stuff, putting a new evap into place, etc. Too much going on :(

Gray

sounds good to me!

when i was researching myself i found alot of things had changed. better methods have been found these days. you guys have it nailed so it would be good to see some new stuff.


:up:

Great idea Noob, Also might want to add a video in there on building a load tester. I look forward to all these new guides!!

Quote:

---

Load tester!

---

Good one! Will put that on the list. Explain it, show how to make one maybe.

Well I made up a really nice load tester and still have pics of the old one (and I need to rebuild it anyways :D) so that could be an easy one to do.

I hope you're willing to edit the raw footage too! I'm just as bad at video editing as I am with pics :p:

Great idea noob. When i built my first SS a couple of years ago, most of the guides and links here were of no use at all.
Luckily, there were peeps here in the UK that i could talk on the phone with and they helped me through it.

Of all the things that might be of very good use for a video tutorial might be building a recovery unit from scratch ?
It's something i don't need now (got a pre-built), but it is something that all of us have to have at some point.

Given the nature of this community, I'm surprised this doesn't happen more often!

I can edit footage or we can find someone here on XS who is good at things like that! Community project! :)

Recovery from scratch is a good idea, I've got one built, but plan on ugprading it very soon to accommodate a plate HX for separation of gases when recovering from a autocascade.

So I've been in a position where I have to move for a while now, been holding off until I could find something ideal.

I found one, and I'm hoping to get it. Won't know for a bit (wish he'd just have said yes, but in this day and age, there's loads of renters so you have to be patient and hopeful.

If I do, the video guides (at least any that I might make) will wait for that.

Basically, this new place (if I get it) is a small studio with a large workshop. Ideal for a mad scientist. 220v power and everything.

500sq of workshop area. Not huge but bigger than I have now. So if that's happening I can set up a much better area for the work, making vid's, and if I can manage maybe even get back into some benching again.

One of the reasons I gave it up (other than killing 2-3k worth of stuff in a very short time) was the lack of space. Phase building OR benching space, not both.

If this works, I'll have enough for it all. At least I'd have a nicer area for it. Space's so small right now, it's always a mess :(

So I hope so anyways. Get some lighting and some sucker to hold a camera (likely my brother) and try to do what I can to help. Much as the phase forum's quieter and seems (at times) like it's lost it's way, XS still deserves the best. So a video guide series really is a good idea.

Gray

Great idea :up: