Printable View
http://upl.mine.nu/uplfolders/upload4/3dmark268fsb.jpg
http://service.futuremark.com/compare?2k1=7483802
Not tweaked(Dx8.1,Win2k and much more) only testing highest fsb in 3DMark2001...
http://upl.mine.nu/uplfolders/upload...softhyperx.jpg
Highest score in Sisoftsandra..
:cool:
pretty nice.
What kinda mods have u done?
You filthy liar, ORB says 11FSB! :p:
(just kidding, extremely nice job! :toast: )
I compared your score, to some of my old NF2 scores and your bandwidth is through the roof, but your nature score is sky high as well.
nice work :)
Someone should give him a 3Ghz 3200+ and some phase change for his 9800 (or that and an XT :slobber: )...
Lastviking, what is the cooling used on your northbridge ?
The 3gig Barton just wont run that high FSB.Quote:
Originally posted by xDUCK
Someone should give him a 3Ghz 3200+ and some phase change for his 9800 (or that and an XT :slobber: )...
At 2.2gig I can bench 3dmark at 245+, but once I get closer to 2.9gig FSB performance falls away untill at 3gig I can only do 216.. and thats not propperly stable.
Awesome FSB viking, this DFI board never fails to impress.
That's probably the NF7's high vcore/high fsb bug kicking in; you'll probably find the same problem no matter what the overall cpu mhz is. AFAIK, the DFI is a lot better with high fsb/high vcore.Quote:
Originally posted by Holst
The 3gig Barton just wont run that high FSB.
At 2.2gig I can bench 3dmark at 245+, but once I get closer to 2.9gig FSB performance falls away untill at 3gig I can only do 216.. and thats not propperly stable.
Awesome FSB viking, this DFI board never fails to impress.
hmm.. hey last viking.. how bout a challenge.. all air cooling.
i wanna take you on in 3dmark.
what do you say? thi comming week im getting a hard drive to use on my infinity.. and ill have better than stock cooling on my 9800. lemme know! this could get fun.
*eeek!*:stick:
just saw your cpu speed.. i cant quite compete with that.. but i can try!
Hey Spork, your signature is ginormous.
yes i know.. i had to put the garfield in there lol... want i to remove the stupid pic? :p
edit: all better hehe.:rolleyes:
BTW xDuck, keep up teh [H] quotes! those give me a kick!:D
lol, @ [H] quote...
Jesus thats class!!! :toast:
Heres a screenie of my NF7 / Barton compare, complete pwnage in lobby nice one. EDIT - Noticed its a thornton with 512KB cache!! :eek:
Now get 2K on there and get tweaking those car scores are appalling heheh :P :toast:
(note the WTF next to ME heheh :D )
http://mywebpage.netscape.com/ricjax...ss/DFi-NF7.jpg
Once you've got tweaked if you could be so kind as to do your best fsb/cpu speed bench at the same clocks as me 438/384 (I know POFS 9800PRO :( ) so i can have something to look upto, pleeeeease :D cheers :toast:
Can bench 3dmark at 255x11, 3,45Vdimm and bios 18-12...
Gonna try out the 21-1 tonight. Maybe.
I can do prime with my cpu at 2860MHz at 2,08V, and I do not know exactly if there's room for more... That's at 260fsb and every mhz I add to fsb makes my cpu increase clocks 11MHz!!!
And I cannot change multiplier :rolleyes:
@Holst
I can bench at 2860(260fsb 11-2-2-2-2,0-13-13) :p: Hehe. DFI power! ;)
Nexttime the temp drops out i will try 10x268(2680mhz) maybe i need to have higher vcore for the cpu(but it´s a fast modd)
And the 9800Pro are not maxed yet and not vmodded(i cane run 472.5/491.5 without vmodd"maybe a bit higher")
And i´m using dx9.0 and WinMe and that drops the score a bit..
If i´m are lucky i cane run @ 270fsb(if i have right temp, the first test is hardest for the high fsb)
I hope i don´t kill this board...(i have f#cked my ide1 already it works but not so good :/)
:stick:
wow those are amzing 9800 clocks!!
i cant get much past 460/370 with stock cooling.
hope u dont kill it!! that would be horrible!
What did you do to the IDE chanel? What CPU cooling are you using?
You have yet to not impress me. IMO your one of the top AXP benchers around. You have inspired me to stay AXP and reach my goal of 20k. I'll be ordering my infinity later today :D
the dfi has really relaxed timings though, right? would have expected more from such a high fsb
Turn it the other way around instead Saaya and ask yourself if there is any other Socket a board that can provide that much memory bandwidth? Who cares if it says 280 or 240 fsb.
bios 01/21 doesn't push performance in 3D. If you use 18/12 dfi is better than nf7. Limit on this board (seems to me) are voltage related.
For me I find 12/18 and 1/21 to perform the same in 3D stuff.
methinks ill try 12-18 myself.. single side ram and stuff. should be fun.. thats tonight!
My experiences too... :)Quote:
Originally posted by Walrusbonzo
For me I find 12/18 and 1/21 to perform the same in 3D stuff.
But 3dmark acts weird. Sometimes I get a full run, sometimes not, and scores vary from 10 to 20% (single tests compared)...
Does anyone gets his infinity/LP revB prime stable at 250 or above dc 11-2-2-2-2,0-9-12-enabled-fast-blabla... ?
holy §§§§, look @ lobby low! :slobber:
only 2.55GHz, too! :eek:
i dont care about memory bandwidth... what good is a higher bandwidth if the timings lowered to make it possible drop the overall performence by the same amount the bandwidth gains increase it?Quote:
Originally posted by mackanz
Turn it the other way around instead Saaya and ask yourself if there is any other Socket a board that can provide that much memory bandwidth? Who cares if it says 280 or 240 fsb.