ASUS P8P63 REV 3 does not wake from SLEEP

I just completed building my new computer. Intel i7 2600K. I noticed it does not come ut of hibernate mode. Also, when I reboot the computer it posts and then it posts a second time after the CPU fan stops for a second or two.

1.) I overclocked the system.
2.) What is the easiest way to go to original non-overclocked settings?
3.) Any ideas on this hibernate issue?

Thanks

From what I've gathered, waking from sleep is an issue on all P67 boards including my Sabertooth P67 Rev3.

Thanks. Does anyone know if it is a Windows 7 issue? Motherboard? Memory?

PLL overvoltage has to be off.
This is a known issue kinda like how the cold boot issue was with the 1155 Asus boards.
Your overclock may not be as high with PLL overvoltage off - I had to drop from 4.9 to 4.8ghz on my i7-2600k...

So if I turn off the PLL Overvoltage this problem goes away? I have the ASUS P8P67 DELUXE board B3

Yup but again your overclock stability may or may not be lower.

Quote:

---

Originally Posted by apopilot

So if I turn off the PLL Overvoltage this problem goes away? I have the ASUS P8P67 DELUXE board B3

---

Both are known issues.
Disable CPU PLL overvoltage and standby will work again, but your cpu will not go as high as it would with that setting set to "ENABLED".

With the double boot, do this:

enter UEFI BIOS -> go to ‘Advanced’ tab -> go down to ‘APM’, press Enter -> enable the “Power on by PCIe.” function. Then press F10 to save & exit