-
GIGABYTE P67A-UD7 & Core i7-2600K Show Off
-
yessssssss same CPU / MOBO as me
so i will expect some result like this
-
What bios/cpuz are you using where it can read voltage?? I have weird issues past 52 multi...
-
-
You should try F7a BIOS, my friend has the same setup and F7a has improved his overlclock greatly.
-
nice chip :)
did you have any issues going past 52 multiplier?
i cant boot anything over 52 on my ud4.
-
Quote:
Originally Posted by
overcrash
You should try F7a BIOS, my friend has the same setup and F7a has improved his overlclock greatly.
I can't tell any difference with my UD7 on multiple chips. CMOS Reset needs one more power down now, but that's it. And the splash screen is enabled by default ... yeah!
-
Is the higher multi possible?
-
-
nice start benny but I am missing 5600 :p: :D :D
-
nice benny subscribed :up:
-
Quote:
Originally Posted by
steponz
What bios/cpuz are you using where it can read voltage?? I have weird issues past 52 multi...
CPU-Z 1.56.2....i didn't experience passing 52 multi
Quote:
Originally Posted by
Afrokalle
Nice start Benny :up:
Hey man, long time no see... thanks !
Quote:
Originally Posted by
overcrash
You should try F7a BIOS, my friend has the same setup and F7a has improved his overlclock greatly.
Yes i will try F7A BIOS....will update the thread soon
Quote:
Originally Posted by
oanvoanc
nice chip :)
did you have any issues going past 52 multiplier?
i cant boot anything over 52 on my ud4.
No i didn't experience it, some of my friend having this problem but when they switch to another CPU, no issue anymore.
Quote:
Originally Posted by
_mat_
I can't tell any difference with my UD7 on multiple chips. CMOS Reset needs one more power down now, but that's it. And the splash screen is enabled by default ... yeah!
sometimes this happen if you set voltages too high or turbo enable... try to set all voltages to AUTO dan disable turbo.
Quote:
Originally Posted by
MaJ0r
Is the higher multi possible?
Will try soon...
Quote:
Originally Posted by
THC
nice setup :)
Thanks ! :toast:
Quote:
Originally Posted by
SoF
nice start benny but I am missing 5600 :p: :D :D
haahahhaa... yeah i will hope joining 5600 soon....
Quote:
Originally Posted by
GLENBOY
nice benny subscribed :up:
Thanks !
-
Quote:
Originally Posted by
MaJ0r
Is the higher multi possible?
should be, i can boot 54 x 100 with my ud7.
I just have some Problems with highest memory multi 21,33, there is noway for me to get it work.
-
Looking good bro magic 5 stable, I hope that I will manage same!
By the way; THat is one sexy phone you got there :p:
-
Quote:
Originally Posted by
Benny Lodewijk
No i didn't experience it, some of my friend having this problem but when they switch to another CPU, no issue anymore.
hey, thanks for sharing.
will get rid of my chip and try other :)
btw:
with baseclock at 100 my maximum bootable multiplier was 52, after reducing bclk to 99, 53 was possible, but thats the max.. not to mention the 1,57v it needs for this :down:
-
Nice Im playing with the same setup, with 2 2600K L040b165, and L040B307.
Can you change multi with easytune 6 ?
-
-
-
Quote:
Originally Posted by
SuicidePhoenix
should be, i can boot 54 x 100 with my ud7.
I just have some Problems with highest memory multi 21,33, there is noway for me to get it work.
i use Kingston HyperX module and also got problem running DDR3 -2133, no matter what timing i use. But after changing RAM to GSKILL F3-17600CL7D-4GBPIS, running DDR-2133 is very very easy.
Quote:
Originally Posted by
M.Beier
Looking good bro magic 5 stable, I hope that I will manage same!
By the way; THat is one sexy phone you got there :p:
hahaha thanks bro.. i'm in rush and this is the "maximum camera" specification i got in hand on time :rofl::rofl:
Quote:
Originally Posted by
oanvoanc
hey, thanks for sharing.
will get rid of my chip and try other :)
btw:
with baseclock at 100 my maximum bootable multiplier was 52, after reducing bclk to 99, 53 was possible, but thats the max.. not to mention the 1,57v it needs for this :down:
Good luck with your new chip mate :toast:
Quote:
Originally Posted by
Nanok
Nice Im playing with the same setup, with 2 2600K L040b165, and L040B307.
Can you change multi with easytune 6 ?
Yes i can, but need to boot the system... so it's the same if you change multi from BIOS.
-
Hey man see what you can get with less cores, even at 1core i want to see if you can push 5.7, that would be sick. You are running with HT on and that is impressive as heck.
-
Quote:
Originally Posted by
sin0822
Hey man see what you can get with less cores, even at 1core i want to see if you can push 5.7, that would be sick. You are running with HT on and that is impressive as heck.
Hi mate, i did try with less cores but still i stuck at 5.5 GHz...
-
Once again a nice bit of clocking Benny.
2133 easy with Geil OEM ram for some reason.
Hypers will not do it at all - actually my Hypers do not like even booting into BIOS with the P67 right now.
Back to 2133 - got a huge boost in score in 3Dmark06 when using 2133 even at loose timing 9-9-9-28 The score was 1000 points better than 1866 7-8-7-24???
Now only if I can get my CPU to go higher than 5.288GHz - it will bench that speed all day on Air at 1.485 volts but makes not difference what I do it will not go higher. Dry Ice, SS water more volts less volts. Nada - that is the max I can get .... for now.
Subscribed I want to see you get x57 still. :D
-
Quote:
Originally Posted by
Benny Lodewijk
Hi mate, i did try with less cores but still i stuck at 5.5 GHz...
Hmmmm it seems like you and most others are stuck here no matter the board. What about FSB? can you push BLCk at all? I found that somtimes youcan push upto .7blck. BTW what blck can you do at stock i am just curious?
-
@1day, got the same problem here. it does 5 quite easy, after this everything changes.
i can bench 5.1 at 1.425 in bios... for 5.2 however i need 1.5v in bios and it locks during os loading.
But i figured out what my problem was/is. When i set 1.450 vcore in bios it drops down to 1.385 during load... seems like load line calibration is not working or something.
The best thing, dust off your fluke and measure the actual voltages.
-
Quote:
Originally Posted by
sin0822
Hmmmm it seems like you and most others are stuck here no matter the board. What about FSB? can you push BLCk at all? I found that somtimes youcan push upto .7blck. BTW what blck can you do at stock i am just curious?
BCLK max i can is 102, but it depends on CPU Multi i use, higher multi, less BCLK i can run.
Quote:
Originally Posted by
LyP0
But i figured out what my problem was/is. When i set 1.450 vcore in bios it drops down to 1.385 during load... seems like load line calibration is not working or something.
The best thing, dust off your fluke and measure the actual voltages.
You are using UD7 too ? Because in my case, i didn't found any issue with LLC, all works flawlessly.
