G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600

Printable View

01-13-2011, 01:14 PM
ProStreetCamaro

G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600

:up: It is linx stable at 1.66V. I was an idiot and closed out everything before i took the SS. :ROTF:

http://img.photobucket.com/albums/v4.../Sweetspot.jpg
01-13-2011, 02:48 PM
btdvox

I bought two of the same kit. Im assuming these were DDR3-1600 @ CAS9?

Will you be running this @ 24/7 and also did you run Memtest for awhile?
01-13-2011, 02:53 PM
ProStreetCamaro

Quote:

Originally Posted by btdvox

I bought two of the same kit. Im assuming these were DDR3-1600 @ CAS9?

Will you be running this @ 24/7 and also did you run Memtest for awhile?

These are 1600 7-8-7-24

http://www.newegg.com/Product/Produc...82E16820231431
01-13-2011, 03:17 PM
flesheatinvirus

I just got this set in 20 minutes ago, its still on the kitchen table. Yeah I thought they where good too and you just proved it. Nice:up:
01-13-2011, 07:44 PM
ProStreetCamaro

Quote:

Originally Posted by flesheatinvirus

I just got this set in 20 minutes ago, its still on the kitchen table. Yeah I thought they where good too and you just proved it. Nice:up:

Once you do some testing let us know how it goes! :D
01-14-2011, 03:46 AM
flesheatinvirus

Will do Pro, I have some issues with this board doing dual channel right now but will resolve it soon. I was using two of my three sticks of perfect storm 6G set and even that can do 2150 at 8-9-8-21 1T at 1.7v but that is only 4G not 8.
01-19-2011, 10:26 AM
xTc

Quote:

Originally Posted by ProStreetCamaro

These are 1600 7-8-7-24

http://www.newegg.com/Product/Produc...82E16820231431

Could you please post a picture? I'd like to know if the kit has a black pcb.

Thanks & best regards
01-21-2011, 07:13 PM
ProStreetCamaro

Quote:

Originally Posted by xTc

Could you please post a picture? I'd like to know if the kit has a black pcb.

Thanks & best regards

Yes my kit came with the black pcb

http://img.photobucket.com/albums/v4...4936323118.jpg

http://img.photobucket.com/albums/v4...5665198944.jpg
01-29-2011, 10:40 PM
TheHardCase

Wow

8GB is amazing from 1600 - 2133, G-Skill for life:up::up::up:
02-27-2011, 01:45 PM
EniGmA1987

I have 16GB (4 x 4GB) of these sticks in my computer running at 7-8-7-24-1T timings @ 1.6v. I cant increase the speed at all at these timings, and I cant drop the timings at all at these speeds.

Is there really much of a performance hit if I drop down to 2T command rate? I can probably increase the speed some if I drop it but I have heard from way back in the DDR2 days that going to 2T timing could have as much as a 25% hit on bandwidth. Is it still the same in todays DDR3 world?
02-27-2011, 02:49 PM
XII

Quote:

Originally Posted by EniGmA1987

I have 16GB (4 x 4GB) of these sticks in my computer running at 7-8-7-24-1T timings @ 1.6v. I cant increase the speed at all at these timings, and I cant drop the timings at all at these speeds.

Is there really much of a performance hit if I drop down to 2T command rate? I can probably increase the speed some if I drop it but I have heard from way back in the DDR2 days that going to 2T timing could have as much as a 25% hit on bandwidth. Is it still the same in todays DDR3 world?

Could you look at the PCB`s used?
Would like to know if they are GA, or GB marked.
02-27-2011, 03:37 PM
Sam_oslo

Wondering why these are rated at 1.6v while it clearly says "Designed for P67"?

Quote:

Originally Posted by EniGmA1987

I have 16GB (4 x 4GB) of these sticks in my computer running at 7-8-7-24-1T timings @ 1.6v. I cant increase the speed at all at these timings, and I cant drop the timings at all at these speeds.

Is there really much of a performance hit if I drop down to 2T command rate? I can probably increase the speed some if I drop it but I have heard from way back in the DDR2 days that going to 2T timing could have as much as a 25% hit on bandwidth. Is it still the same in todays DDR3 world?

If you are using it on your Asus P8P67, then you can just loosen up timings and bump up the speed. SB is all about brute speed, and would perform the same with loose timings.
See if it can do 1866MHz CL9, 1.5v for 24/7.
02-27-2011, 04:55 PM
ClockZ

I have this same kit running 1866 cas8 1T@1.6V on Asrock P67 extreme4,runs solid as a rock:up: Will also do 2133 cas9 1T @1.65 for me. Great memory for 24/7.
02-27-2011, 07:04 PM
dengyong

Quote:

Originally Posted by ClockZ

I have this same kit running 1866 cas8 1T@1.6V on Asrock P67 extreme4,runs solid as a rock:up: Will also do 2133 cas9 1T @1.65 for me. Great memory for 24/7.

Could you list your other timings please ? :up:
02-27-2011, 07:45 PM
ClockZ

Quote:

Originally Posted by dengyong

Could you list your other timings please ? :up:

These are my settings for what im running now in the screenie, 2133 is 9/10/9/24 1T 1.65V,all the subs are on auto....havent got to tweaking those yet. been doing lots of strees testing/benching/gaming with the screen shot settings,Rock solid.
http://i148.photobucket.com/albums/s...illcapture.png
02-27-2011, 07:55 PM
PatRaceTin

Ahh look good for 8GB Kit
02-27-2011, 08:33 PM
dengyong

Quote:

Originally Posted by ClockZ

These are my settings for what im running now in the screenie, 2133 is 9/10/9/24 1T 1.65V,all the subs are on auto....havent got to tweaking those yet. been doing lots of strees testing/benching/gaming with the screen shot settings,Rock solid.

Thanks.