A start..2600K and Intel Burrage board

Printable View

Show 100 post(s) from this thread on one page

01-10-2011, 03:14 PM
Movieman

1 Attachment(s)

A start..2600K and Intel Burrage board

Board arrived today, built and just a fast bench before dinner.
This is at 5088MHz
More to come.
01-10-2011, 03:18 PM
Don_Dan

Heh, the new board arrived... :)

Have fun Mr. Mainboard Killer! :rofl:
01-10-2011, 03:20 PM
slaveondope

Can I get some boinc numbers :p:

I saw ~30K reported for 2 days on your account but you claimed ~33.5K for a full day @3.5ghz so I take it your stats didnt show a full blown 8 day run:shrug:

Congrats on the new board:up: and PiSlaughter:eek:
01-10-2011, 03:44 PM
Movieman

Quote:

Originally Posted by Don_Dan

Heh, the new board arrived... :)

Have fun Mr. Mainboard Killer! :rofl:

:up:

Quote:

Originally Posted by slaveondope

Can I get some boinc numbers :p:

I saw ~30K reported for 2 days on your account but you claimed ~33.5K for a full day @3.5ghz so I take it your stats didnt show a full blown 8 day run:shrug:
Congrats on the new board:up: and PiSlaughter:eek:

I want SIXES!I tried the WCG Boinc bench at 5088MHz and it bluuuuuescreened on me with 1.45vcore
01-10-2011, 03:45 PM
Mydog

Nice MM:D
Finally you can do some real WCG testing:rofl:
01-10-2011, 03:49 PM
Movieman

Quote:

Originally Posted by Mydog

Nice MM:D
Finally you can do some real WCG testing:rofl:

Yea, board #3 and just updating the bios took me 1/2 hour to get right..
01-10-2011, 03:50 PM
Lu523

About time you got somewhere with it.
01-10-2011, 03:54 PM
zalbard

Says 1628MHz to me! :sofa:
Pretty good SPi time for such a clock, though! :rofl:
01-10-2011, 04:18 PM
mezcal

Good thread as I'm interested in this board.
Are you using the Intel cooler, MM?
01-10-2011, 04:30 PM
runmc

Awesome Dave - I'm excited for you. :clap: rock and roll

I would call so we could talk bios but :sofa:
Leave cpuz open and do a print screen right when SPi finishes and you can catch the correct cpu speed.
01-10-2011, 05:17 PM
Movieman

1 Attachment(s)

Quote:

Originally Posted by zalbard

Says 1628MHz to me! :sofa:
Pretty good SPi time for such a clock, though! :rofl:

Damn Ruskies!:rofl:

Quote:

Originally Posted by mezcal

Good thread as I'm interested in this board.
Are you using the Intel cooler, MM?

No, will list specs

Quote:

Originally Posted by runmc

Awesome Dave - I'm excited for you. :clap: rock and roll

I would call so we could talk bios but :sofa:
Leave cpuz open and do a print screen right when SPi finishes and you can catch the correct cpu speed.

Yes,yes,yes, damned Texans!:rofl:
Specs:
Intel Burrage Board
2600K D2
TRUE w/113CFM Delta 120x25mm
2x4 gig GSKIll Ripjaws DDR3-1500
EVGA 260GTX
PCP+C 610w Silencer
36 gig WD Raptor
ok, WCG BENCH AT 4578MHZ
01-10-2011, 05:56 PM
Lu523

Beats my 980X at 4.4ghz.
01-10-2011, 06:01 PM
Okda

Quote:

Originally Posted by Lu523

Beats my 980X at 4.4ghz.

:shocked::shocked::shocked:

Thanks for this gift before i go to sleep :)

i will sure dream about this sentence
01-10-2011, 06:06 PM
slaveondope

1 Attachment(s)

Beats my 920 @ 4.35 of course:rolleyes:

Seems to have an edge just between 8/9series 4c/8t i7's and 970/980's 6c/12t

How about power consumption MM:) I know it has to be good, Im sold:yepp: going to buy a new cruncher in a week:D
01-10-2011, 08:07 PM
Movieman

Quote:

Originally Posted by slaveondope

Beats my 920 @ 4.35 of course:rolleyes:

Seems to have an edge just between 8/9series 4c/8t i7's and 970/980's 6c/12t

How about power consumption MM:) I know it has to be good, Im sold:yepp: going to buy a new cruncher in a week:D

Right now on WCG at 4500+ at 1.35vcore and killawatt must be broken.
'Showing 119-119.1w and that can't be right:shrug:
Temps running 52-57C according to realtemp
01-10-2011, 08:48 PM
sierra_bound

So 4.5GHz takes at least 1.35v. I was hoping it would do it with less than 1.3v.

What is the highest it will do WCG at stock voltage?
01-10-2011, 08:52 PM
Movieman

Quote:

Originally Posted by sierra_bound

So 4.5GHz takes at least 1.35v. I was hoping it would do it with less than 1.3v.

What is the highest it will do WCG at stock voltage?

Don't know either answer yet.
Today was a biatch the first 2 hours..
Updating BIOS is a "hope it works and try 12 times till it does"
Then learning the thing..
Seen a lot of blue screens today..:rofl:
01-10-2011, 08:56 PM
sierra_bound

Based on reviews I've seen, the 2600K should be generating anywhere from 150-200W at full load. When I get my chip and board, I would like to keep VCore no higher than 1.3v. Once you start pushing the voltage, you run into diminishing returns.
01-11-2011, 01:26 AM
Madidas

Funny... my E6750@3,5GHz:

Quote:

ti 11. tammikuuta 2011 11.19.34 Number of CPUs: 2
ti 11. tammikuuta 2011 11.19.34 3242 floating point MIPS (Whetstone) per CPU
ti 11. tammikuuta 2011 11.19.34 18198 integer MIPS (Dhrystone) per CPU

Whetstone is about 1k less but dhrystone is almost 4k more than SB...
But whetstone is more important(?) I think... And 6 cores more than this...
01-11-2011, 01:31 AM
Origin_Unknown

wow - very nice movieman!

is the burrage board this one?? http://www.intel.com/cd/products/ser...iew/461597.htm
01-11-2011, 05:28 AM
[XC] Hicks121

Got mine up & running last night...ok...it was 2am this morning.:rofl:

I just started to play, still need to update bios. Think I have a bad mount, the cpu temps are kinda high(im not telln). had it to 4.1 on stock volts & was running boinc. These are some crazy fast cpu's....Wow!!! I had to ge to sleep, didnt want to make a mistake & screw something up.

Now to get the kids off to school & get this thing tweeked!!

Ps. ram didnt show up until 6:10 last night.:mad: ups jerks!:p:
01-11-2011, 07:11 AM
Jaco

Quote:

Originally Posted by Lu523

Beats my 980X at 4.4ghz.

Based on the BOINC benchmark only , which is pretty much useless imo
01-11-2011, 07:41 AM
sierra_bound

Quote:

Originally Posted by Jaco

Based on the BOINC benchmark only , which is pretty much useless imo

Agreed.
01-11-2011, 10:35 AM
Movieman

Quote:

Originally Posted by sierra_bound

Based on reviews I've seen, the 2600K should be generating anywhere from 150-200W at full load. When I get my chip and board, I would like to keep VCore no higher than 1.3v. Once you start pushing the voltage, you run into diminishing returns.

I'm seeing 120w right now. Machine has been on WCG solid the past 12+ hours claiming almost 51,600, no validated results yet.

Quote:

Originally Posted by Origin_Unknown

wow - very nice movieman!
is the burrage board this one?? http://www.intel.com/cd/products/ser...iew/461597.htm

Yes

Quote:

Originally Posted by Jaco

Based on the BOINC benchmark only , which is pretty much useless imo

Agreed, just a benchmark to get an idea is all it's worth
01-11-2011, 11:00 AM
shoota

Quote:

Originally Posted by Movieman

I'm seeing 120w right now. Machine has been on WCG solid the past 12+ hours claiming almost 51,600, no validated results yet.

:shocked:

Show 100 post(s) from this thread on one page