[AwardFabrik] SandyBridge 2600K @5589 MHZ - first run air & compressorcooled

...I am still a bit confused why the reviews and NDA was lifted earlier than expected - as everything was reveiled today I just rushed through some benches today...first on air, afterwards on singlestage...cold didn't really help, seemed to be hard to get good RAM-speed under cold (but I have trouble running 2133mhz on air anyway).

Let's start 1m first:

5589 MHZ 1m 6.688s (singlestage cooled)

http://img189.imageshack.us/img189/4109/55891m6688.png

CPUz Valid @5500 MHZ

5585 pifast 13.3s :slobber:

http://img98.imageshack.us/img98/6025/sbpifast.th.jpg

5500 MHZ wprime32m (singlestage cooled)

http://img29.imageshack.us/img29/7738/5500wprime32m.jpg

Here is some 1m on air:

http://img833.imageshack.us/img833/6...m155v6781s.png

3D Mark 2001 (full aircooled nothing special!) seems to like SandyBridge :up:

http://img255.imageshack.us/img255/3...gtx01sb.th.jpg

03 with 465 GTX aircooled

http://img703.imageshack.us/img703/3455/3ys72d7n.jpg

05 with 465 GTX aircooled

http://img84.imageshack.us/img84/187...tx45975.th.jpg

480 GTX @5588 maybe tomorrow :yepp:

regards
SoF

Mmmm good job! :up::up: Could you tell us what the real Vcore was? (I read somewhere that cpu-z was not stating the real one as of now :cool: ).

What kind of temps were you pulling on the chip and evap on your single stage?

I'm starting to think a weaker single stage, like the OCZ Cryo-Z would be ideal for these things.

I have ~42-44°C read directly on the evap. It fires on with a bit vccsa voltage (~1.05-1.1). it shows 1-2°C in bios after a while with 1.6V+ - boots better after beeing in bios compared to full cold boot. first booting is sometimes a bit hard, after a while it get's easier. having a constant temp is hard for wprime - can' get it running for 1024m 5500 :/ testing 480 gtx now :D

Nice runs :up: I'm pretty exciting about the massive clockspeed jumps we've been seeing since ~December. I can only hope 6GHz will be eventually reached through max multi + a little bclk magic.

Quick '01 110K with 480 GTX :)

http://img573.imageshack.us/img573/7931/m6msnol4.th.png

It's great to see some good numbers with the SB.:up: As bioses mature, it will only get better.
Nice job SoF :up:

Nice speeds on that chip SoF :cool:

omg that is beautiful. the on air numbers are with stock hsf?

I dont even know where to start? Im so confused.
i see 100 bus speed and 56 multi and sub 7 sec. spi1m

What CPU cooler did you use for the air tests and what was the room temperature ?

Thanks all!

Quote:

---

Originally Posted by [XC] gomeler

Nice runs :up: I'm pretty exciting about the massive clockspeed jumps we've been seeing since ~December. I can only hope 6GHz will be eventually reached through max multi + a little bclk magic.

---

As soon as we see some scaling with cold it shouldn't be a problem - so far my singlestage just helped me getting temps a bit lower under load but the next wall is around 5.6 now. and I had some more trouble with booting ;)

Quote:

---

Originally Posted by runmc

It's great to see some good numbers with the SB.:up: As bioses mature, it will only get better.
Nice job SoF :up:

---

Thanks man! Yeah I think we still need to learn some more things about the bios - it's interesting to know what these little options actually do ;)

Quote:

---

Originally Posted by miahallen

Nice speeds on that chip SoF :cool:

---

ty!

Quote:

---

Originally Posted by darckhart

omg that is beautiful. the on air numbers are with stock hsf?

---

grand karma cross with arctic silver - need to get a better air cooler or start using the watercooling on my table which I actually never used before :D

Quote:

---

Originally Posted by trans am

I dont even know where to start? Im so confused.
i see 100 bus speed and 56 multi and sub 7 sec. spi1m

---

start with 50x100 1.4V to see if it is a good chip, 1.6 max under air only single core benches I would recommend ;)

Quote:

---

Originally Posted by SoF

Thanks all!



As soon as we see some scaling with cold it shouldn't be a problem - so far my singlestage just helped me getting temps a bit lower under load but the next wall is around 5.6 now. and I had some more trouble with booting ;)



Thanks man! Yeah I think we still need to learn some more things about the bios - it's interesting to know what these little options actually do ;)



ty!



grand karma cross with arctic silver - need to get a better air cooler or start using the watercooling on my table which I actually never used before :D



start with 50x100 1.4V to see if it is a good chip, 1.6 max under air only single core benches I would recommend ;)

---

what about cold boot bug?

rig pic

http://img339.imageshack.us/img339/2396/syssmall1.jpg

480 GTX set of benches all with compressor but I think the brave ones will reach it on air :hehe:

01 110800

http://img16.imageshack.us/img16/8277/01110800.th.jpg

03 125k

http://img84.imageshack.us/img84/576/03125k.th.jpg

05 49380

http://img545.imageshack.us/img545/3021/0549380.th.jpg

06 35360

http://img9.imageshack.us/img9/8099/...tx35360.th.jpg

SOF nice runs mate, Do you think watercooling would even be all that useful compare to air on these chips?

Nice results right there , seems that the platform clocks pretty well on air .

May I ask what was the room temp at the run ?

If you have a hot chip (Not every Sb seems to be cool) it's definitely helpful to have watercooling.

Maybe chilled wc is best for Sb OC.

Fair nough @rne, From all the screenshots which have been posted here on XS, seems like your more vcore limited rather them temps..

Awsome Sof Thanks For share

what about Cb and CBB?

Quote:

---

Originally Posted by Johnny87au

Fair nough @rne, From all the screenshots which have been posted here on XS, seems like your more vcore limited rather them temps..

---

Thats right.

The increase of internal vPLL just changes the maximum core frequency into another range. Benching there needs higher vcore, so something to keep the lifespan of your cpu accetable is required. And if you need high vcore and have a hot chip, you won't get those frequencies stable with aircooling.
In my view, there is no headroom above if the internal vPLL won't be further increased or some guru will find a way to let the chip scale with cold. Then the best coolingmethod to bench will change.

Somehow it feels "5GHz for everyone" is coming closer and closer... I mean, not everyone has powerful cooling systems, 5GHz on air 24/7 should be possible in a near future ;)

Nice runs... performance seems to be very good in Pi...
So hopefully the cold-scaling and the multi-problem will be fixed in the next days/weeks.
I think the BCLK wall is acceptable with multis up to 65 :)

Thanks fpr sharing your results :up:

nice thread dude, i love 01 results with SB :up:

:eek: SB is a real killer !! thats for sure

Quote:

---

Originally Posted by Johnny87au

SOF nice runs mate, Do you think watercooling would even be all that useful compare to air on these chips?

---

TY! Yeah water will be very helpfull when it comes holding the chip cool past 1.5V in benches like Vantage and wprime1024 :)

Quote:

---

Originally Posted by dany74q

Nice results right there , seems that the platform clocks pretty well on air .

May I ask what was the room temp at the run ?

---

Should be around 18°C here at the moment.

Quote:

---

Originally Posted by Johnny87au

[...]seems like your more vcore limited rather them temps..

---

for single core benches yes it seems so but you never know what can happen with the next bios :D

Quote:

---

Originally Posted by BaRaN

Awsome Sof Thanks For share

what about Cb and CBB?

---

RAM CL8 1866 on air no problem, on singlestage gives "63" postcode often. 1600 runs fine but not with good timings - looks like something with the imc (vccsa voltage also seems to be a bit helpfull when having boot issues with a bit under zero). I think anything below DICE is not usefull atm singlestage seems ok - make sure to be prepared for full load on 2600K 4C/8T.

Quote:

---

Originally Posted by NaMcO

Somehow it feels "5GHz for everyone" is coming closer and closer... I mean, not everyone has powerful cooling systems, 5GHz on air 24/7 should be possible in a near future ;)

---

with water and good chips I don't see a problem there :)

Quote:

---

Originally Posted by loopy83

Nice runs... performance seems to be very good in Pi...
So hopefully the cold-scaling and the multi-problem will be fixed in the next days/weeks.
I think the BCLK wall is acceptable with multis up to 65 :)

Thanks fpr sharing your results :up:

---

Quote:

---

Originally Posted by hiwa

nice thread dude, i love 01 results with SB :up:

---

Thanks guys! Yeah 01 is really fun - and if we get like 400 MHZ more together with good RAM clocks it will make an old game shine :)

Quote:

---

Originally Posted by PytonOrm

:eek: SB is a real killer !! thats for sure

---

YEAH and it also rocks in pifast :slobber:

http://img98.imageshack.us/img98/6025/sbpifast.th.jpg