Solid overclock 980x 4.6 ghz on water

Printable View

Show 100 post(s) from this thread on one page

11-22-2010, 06:49 PM
Alka Holic

Solid overclock 980x 4.6 ghz on water

http://img834.imageshack.us/img834/3545/980x2.jpg
11-22-2010, 06:59 PM
Alka Holic

Batch: 3032A340

Pack Date: 10/14/2010
11-22-2010, 07:17 PM
zsamz_

do linx run for solid lol
prime just too easy
you can have 24 hours of prime n fail linx in a matter of minutes;)
11-22-2010, 07:43 PM
Alka Holic

Already did a Linx 20 run

Did not take a screenshot. Linx did not tax my system as much as prime look at the temp differences. I know I only did 5 runs with IBT. I am getting ready to go to the movies. I will do 20 run Linx again tomorrow and post a screenshot.

http://img4.imageshack.us/img4/8209/linxf.png
11-22-2010, 08:34 PM
Alka Holic

Sorry about the screenshot in that last post. I had SpeedStep and C States enabled when I did that Linx run, so that is not the correct core speed or multiplier. I ran the test at the same speed as the Prime 95 screenshot.
11-22-2010, 08:54 PM
safan80

Quote:

Originally Posted by Alka Holic

Did not take a screenshot. Linx did not tax my system as much as prime look at the temp differences. I know I only did 5 runs with IBT. I am getting ready to go to the movies. I will do 20 run Linx again tomorrow and post a screenshot.

Did you use the updated Linpack files from intel? They released files back in march that take full advantage of the 980X. There's link in page 30 of the LinX thread.
11-23-2010, 12:18 AM
miahallen

Also, I think you were only running 6 threads, not 12.....with IBT, you have to set it manually ;)

Still....looks like a very nice chip @ 4.6GHz with only 1.33V :eek:
11-23-2010, 12:52 AM
FlanK3r

yes, with 1.33V is crazy....I topped at 4.6 GHz with AIR, but I needed 1.47V for it :-D (burning temps was about 100 C)
11-23-2010, 01:38 AM
Kimofil

Quote:

Originally Posted by Alka Holic

http://img834.imageshack.us/img834/3545/980x2.jpg

Great result! I think you must re-run it under latest LinX (in this tread latest post) and post it there.
11-23-2010, 06:43 AM
deachus

When you run LinX also make sure you select Max Memory. That IBT run says your only using 4096MB of memory were it says you have 4833MB available.
11-23-2010, 06:47 AM
Gautam

That's a kickass chip.
11-23-2010, 06:53 AM
Metroid

Quote:

Originally Posted by Gautam

That's a kickass chip.

Indeed, imagine at 1.70v :eek:
11-23-2010, 07:09 AM
andressergio

Quote:

Originally Posted by zsamz_

do linx run for solid lol
prime just too easy
you can have 24 hours of prime n fail linx in a matter of minutes;)

same on games zsamz you can linx prime and fail a heavy game ;)
11-23-2010, 08:28 AM
Alka Holic

Ok, When I get home I will perform a Linx run with the setting mentioned here. IBT will not let me select max settings. I get an error stating that I d not have enough memory. I will post a screenshot after I complete the Linx run. I will do 20 passes. I ran Prime for 42 hours.
11-23-2010, 08:37 AM
zalbard

Quote:

Originally Posted by Alka Holic

Ok, When I get home I will perform a Linx run with the setting mentioned here. IBT will not let me select max settings. I get an error stating that I d not have enough memory.

Not using a swap file?
11-23-2010, 11:12 AM
Ccaution

Very nice chip indeed - almost 100GFlops (@linx) on your everyday pc, that used to be sci-fi a few years ago!
11-23-2010, 12:59 PM
Sam_oslo

Quote:

Originally Posted by Alka Holic

Batch: 3032A340

Pack Date: 10/14/2010

This is a good chip :)

This is manufactured so late. Probably Intel has cooperated some of those improvements/goodies from 990x into these latest chips.
11-23-2010, 01:28 PM
godzzila

good? :D:D:D

It is monster if can handle 4,6 GHz LinX under 1,4V real :shocked:
My chip need 1,42V for 4600 MHz and i thought that is best :D
11-23-2010, 05:28 PM
Alka Holic

Linx run completed

Ok, I just completed a Linx run (20) with updated Linpack libraries dated:
Monday September 27, 2010. The Gflops went down compared to IBT. Disregard the clockspeed and multiplier becaues I have C States and Speedstep enabled. The actual clockspeed is 158.51 x 29 = 4596.96 ghz. I am going to try lowering the multiplier and use a higher blck.

http://img338.imageshack.us/img338/2...un11232010.png
11-23-2010, 05:48 PM
Alka Holic

More info:

MB: Rampage 3 Extreme 1102 bios

Voltages:

CPU Load Line Calibration set to Auto
QPI Load Line Calibration disabled

Vcore: 1.34375 actual reading 1.336 with ROG
CPU PLL: Auto actual reading 1.812 with ROG
VTT: Auto actual reading 1.330 with ROG
DRAM: 1.64 actual reading 1.641 with ROG

Cooling: H20-220 Ultima XT Plus

I bought the processor from Microcenter this Sunday and they recieved the shipment on Thursday of last week.
11-23-2010, 05:59 PM
slaveondope

:rotf::slapass::slap::stick:

PM me when you want to sell...............
11-23-2010, 07:58 PM
sniper_sung

this is the best gulftown chip i've ever seen
11-24-2010, 02:42 AM
Kimofil

Quote:

Originally Posted by Alka Holic

Ok, I just completed a Linx run (20) with updated Linpack libraries dated:
Monday September 27, 2010. The Gflops went down compared to IBT. Disregard the clockspeed and multiplier becaues I have C States and Speedstep enabled. The actual clockspeed is 158.51 x 29 = 4596.96 ghz. I am going to try lowering the multiplier and use a higher blck.

http://img338.imageshack.us/img338/2...un11232010.png

Fantastic chip man, congrats!

For showing actual clock in CPU-Z you may try take screenshot when running LinX:)
11-24-2010, 04:03 AM
C_YAA

Quote:

Originally Posted by Alka Holic

More info:

I bought the processor from Microcenter this Sunday and they recieved the shipment on Thursday of last week.

Could you tell us wich Microcenter (city)?

Regards
C_YAA
11-24-2010, 05:45 AM
Alka Holic

Did another run at 200 bclk

This time I got an error and bumped the vcore up to one notch -> 1.35. All other voltages are exactly the same as previously posted. The processor was bought at Microcenter in Bethesda Maryland. I think they have 4 or 5 left. I am not sure if they are they same batch and pack date.

During run:

http://img152.imageshack.us/img152/7732/vcard.png

http://img811.imageshack.us/img811/3738/linxfinal1.png

After run:

http://img146.imageshack.us/img146/3751/linxfinal2.png

Show 100 post(s) from this thread on one page