MCW80 on SLI GTX460 + MCW30 on PhysX GTS450

Yesterday i tested the MCW30 on the GTS450 and saw it work very nicelly. Today i received the 2 MCW80 i ordered. Found that the GT200 plate is a perfect fit for a GTX460 with only 2 more hole ( or 4 if you want to be perfect ... )

Everything was pretty straight foward, only the Clamp on the Bloc scared me cause they are very close to the next card but its OK, everything have a decent clearence and nothe to short with is near BTW !

I dont have temp result yet since im Leak testing ( writing on my laptop ... ). Im only missing the Heatsink for the memory .. suposed to knock at the door soon.

Pics ;) Final result tomorow !

http://www.infodupat.com/MiscPics/MCW80_001.jpg

http://www.infodupat.com/MiscPics/MCW80_002.jpg

http://www.infodupat.com/MiscPics/MCW80_003.jpg

http://www.infodupat.com/MiscPics/MCW80_004.jpg

http://www.infodupat.com/MiscPics/MCW80_005.jpg

http://www.infodupat.com/MiscPics/MCW80_006.jpg

http://www.infodupat.com/MiscPics/MCW80_007.jpg

http://www.infodupat.com/MiscPics/MCW80_008.jpg

http://www.infodupat.com/MiscPics/MCW80_009.jpg

http://www.infodupat.com/MiscPics/MCW80_010.jpg

http://www.infodupat.com/MiscPics/MCW80_011.jpg

http://www.infodupat.com/MiscPics/MCW80_012.jpg

http://www.infodupat.com/MiscPics/MCW80_013.jpg

http://www.infodupat.com/MiscPics/MCW80_014.jpg

http://www.infodupat.com/MiscPics/MCW80_015.jpg

Nice! I would try two rotaries on the MCW30, it will help a lot with tubing route

yeah, i know, but i dont have any in hand. With antikink, nothing is kinking !

Temp are really nice. Played Mafia 2 and the hotest GPU was ~45°c with a 30°c room and the GTS460 clocked at 905mhz with 1.145 volts.

Nice, I like the chipset block recycling. I have a mcw30 laying around in a box, could be a good idea.

I like your rack, it's pretty loaded... :rolleyes:

yeah, its now pretty heavy !!!!

I could have used 90° rotary for a cleaner tubing work but im "fonction over fashion".

Pardon for my silly questions :)

1. GT200 plate in the MCW80 package is no need to drilling? Out of the box will
be fit in GTX460 card mounting? A reference pcb GTX460, isn't it?
2. I saw 4 long screws on your GTX460, is it the same 4 long screws in GT200
mounting package in MCW80? Except you have not used 4 black plastic
standoffs? What about the thumbnuts? Are you using the same GT200'
thumbnuts mounting package?

Thx for the reply. I have one MCW80 and GTX460 reference card lying and thinking the same methods you already done. It is a perfect combination for wc'ing GTX460 without looking a full cover wb :D

Quote:

---

Originally Posted by Sadhana

1. GT200 plate in the MCW80 package is no need to drilling? Out of the box will
be fit in GTX460 card mounting? A reference pcb GTX460, isn't it?

---

No, like he said in his original post, he had to drill 2 holes in the plate.

For perfect centered mount you can drill 4 hole, but 2 is enough. The hole are correct from left to right, but not from top to bottom on the GT200 plate.

GT200 is scare, GTX460 is rectangle.

Currently idling at 27°c on all 3 cards. Playing mafia2 for hours and im at 40°c on the hotter GPU.