-
Retail i5 655K - overclocked :D
-
nice
and :lol: 13.06GHz :D
-
-
Nice job!!
What voltage in memory?
-
:up::up: nice one man
lol 13GHz try it :D with 14V
-
Nice to see this bug. :D
Your ES is better than your retail ? The retail reach the same frequency ?
-
thanks guys :D
Quote:
Originally Posted by
fuzz3l
Nice one! CB/CBB?
Cold boot @ -140c
Cold bug @ unknow
but for wprime at 6.1GHz it was -152c
Quote:
Originally Posted by
Sobota
Nice job!!
What voltage in memory?
1.61v ;)
Quote:
Originally Posted by
hiwa
:up::up: nice one man
lol 13GHz try it :D with 14V
Hi Bro,
not 14v but near of that :rofl::rofl:
i always use the BIOSTAR Overclock Matrix Genie(O.M.G.) ,just pressing F10 from within the system initialization LOGOand it allows direct access to change several board device frequencies and voltage and at O.M.G. i raised the vcore from 1.78v to 1.85v but for some unknow reason jumped to 2.12v :S
Quote:
Originally Posted by
redratamd
Nice to see this bug. :D
Your ES is better than your retail ? The retail reach the same frequency ?
ES is better i think
4950Mhz for 3d06 air
max clock 6600MHz
retail with a bit more vcore
4850MHz for 3d06 air
max clock - unknow because after that 13GHz bug the board suffered the BSOD and then refuse to post or start up again.
Ive tried to change the phisical bios rom with no luck :(
So I disassemble everything from the failed Tpower and reassemble everything and now its working again :D
I will push again soon :D
-
-
Nice runs! Wprime1024M@6GHZ is strong! Hope you can push it again when you get the bugs worked out. :p:
-
Nice results. Every review I've seen so far has the ES chips performing better than retail :(.
-
Hey junior im in the same ship but I cant get up to 13ghz on this bios :D
I need your help man I never had great luck with this board because I never really found the sweet spots in the bios.
the main problem is the vcore/vtt combo. the whole +0.xxx vcore settings always confused me. Is it as simple as resetting the board and running it at default and finding the default vcore then adding to this number?
vtt I see everyone using is around 1.45v so im going in small steps. I did the cb mod on the underside of the cpu with a pen and then the board. so I am in fine at -120 so far,.
http://i239.photobucket.com/albums/f...i55655k039.jpg
I noticed your qpi is at auto. Is that just a quick pic you took ? ive been running my qpi at the lowest setting.
heres a shot of the bios. I need help with the lower portion.
http://i239.photobucket.com/albums/f...i55655k055.jpg
sorry to hijack im not trying to. just need some help from a buddy. Ill keep trying different settings in the meantime.
heres some pics. my retail 655k is 05/03/10
L008B540
-
Good photos! These cpu's were made to play the overclocker!
-
Quote:
Originally Posted by
trans am
Hey junior im in the same ship but I cant get up to 13ghz on this bios :D
I need your help man I never had great luck with this board because I never really found the sweet spots in the bios.
the main problem is the vcore/vtt combo. the whole +0.xxx vcore settings always confused me. Is it as simple as resetting the board and running it at default and finding the default vcore then adding to this number?
vtt I see everyone using is around 1.45v so im going in small steps. I did the cb mod on the underside of the cpu with a pen and then the board. so I am in fine at -120 so far,.
I noticed your qpi is at auto. Is that just a quick pic you took ? ive been running my qpi at the lowest setting.
heres a shot of the bios. I need help with the lower portion.
sorry to hijack im not trying to. just need some help from a buddy. Ill keep trying different settings in the meantime.
heres some pics. my retail 655k is 05/03/10
L008B540
Try , PLL 1.55 to about 1.7v and with vtt between 1.4v to 1.5x
keep pushing it
-
i JUST SAW THIS BUT LN2 IS CASHED. tHIS is what I got from that session....
spi 1m
http://hwbot.org/community/submissio...55k_7sec_422ms
wprime 32m
http://hwbot.org/community/submissio...655k_8sec_94ms
2001
http://hwbot.org/community/submissio...70_65095_marks (5770)
I need some more juice. I feel like Ive only scratched the surface with this 655k